null

Corvette

150 of 182 Items
  • Fuelab 6 Micron Microfiberglass 3" Fuel Filter (E85) Fuelab 6 Micron Microfiberglass 3" Fuel Filter (E85)

    Fuelab 6 Micron Microfiberglass 3" Fuel Filter (E85)

    Fuelab 6 Micron Microfiberglass 3" Fuel Filter (E85)   Choice of -6AN, -8AN, -10AN or -12AN inlet/outlet Fuelab filter with long (3 inch) 6 micron / Micro-Fiberglass Element - Our most advanced filter element provides extra particle protection and...

    $189.99
    Choose Options
  • DMS -10an High Flow Billet Catch Can DMS -10an High Flow Billet Catch Can DMS -10an High Flow Billet Catch Can DMS -10an High Flow Billet Catch Can DMS -10an High Flow Billet Catch Can

    DMS -10an High Flow Billet Catch Can

    DMS -10AN High Flow Billet Catch Can Engineered to harness crankcase pressure, our DMS catch can uses high air velocity to effectively separate oil droplets from your engine’s crankcase air. As the oil/air mixture enters the can, it is forced into...

    $179.99
    Choose Options
  • Hawk Performance Brake Pads Rear Hawk Performance Brake Pads Rear

    Hawk Performance Brake Pads Rear

    Hawk Performance Brake Pads Rear High Performance Street 5.0 Brake Pads; w/ 0.770 ThicknessFor years, engine builders have been pushing motors to the limits of their ability, and at Hawk Performance, we're closer than ever to pushing the ABS Rev Limiter...

    $174.99
    Add to Cart
  • LS Accel Extreme 9000 Ceramic Spark Plug Wires – High Heat Race-Ready Ignition Protection - FullSET LS Accel Extreme 9000 Ceramic Spark Plug Wires – High Heat Race-Ready Ignition Protection LS Accel Extreme 9000 Ceramic Spark Plug Wires – High Heat Race-Ready Ignition Protection

    LS Accel Ceramic Plug Wires

    LS Accel Extreme 9000 Ceramic Spark Plug Wires High Heat Race-Ready Ignition Protection Tired of burning spark plug wires on your high-performance LS engine? ACCEL has the ultimate solution for race and street/strip applications where high under-hood...

    $169.99
    Add to Cart
  • Accel Extreme 9000 Ceramic Spark Plug Wires Accel Extreme 9000 Ceramic Spark Plug Wires Accel Extreme 9000 Ceramic Spark Plug Wires

    Accel Extreme 9000 Ceramic Spark Plug Wires

    Accel Extreme 9000 Ceramic Spark Plug Wires Do you want to put headers on your vehicle, but are afraid you may cook the spark plug wires? Just looking for a nice upgrade for your stock spark plug wires? If you answered yes to any of these questions,...

    $149.99
    Add to Cart
  • LS9 ZR1 DMS Blower Blocks LS9 ZR1 DMS Blower Blocks

    LS9 ZR1 DMS Blower Blocks

    LS9 ZR1 DMS Blower Blocks   These billet coolant blocks are perfect for guys looking to upgrade the cooling system found on the 2009-2013 ZR1 Corvette with the LS9 supercharger. These blocks are cnc machined out of 6061 aluminum and anodized for...

    $149.99
    Choose Options
  • DMS 9.60" C7Z LT4 for ATI Balancer DMS 9.60" C7Z LT4 for ATI Balancer DMS 9.60" C7Z LT4 for ATI Balancer

    DMS 9.60" C7Z LT4 for ATI Balancer

    DMS 9.60" C7Z LT4 for ATI Balancer The DMS 9.60" 8 rib balancer pulleys are a great way to increase supercharger RPM resulting in higher airflow and boost levels. These pulleys are CNC machined from 6061 aluminum and anodized for longevity. Designed to...

    $144.99
    Add to Cart
  • DMS 9.20" C7Z LT4 for ATI Balancer 15% OD DMS 9.20" C7Z LT4 for ATI Balancer 15% OD DMS 9.20" C7Z LT4 for ATI Balancer 15% OD

    DMS 9.20" C7Z LT4 for ATI Balancer 15% OD

    DMS 9.20" C7Z LT4 for ATI Balancer The DMS 9.20" 8 rib balancer pulleys are a great way to increase supercharger RPM resulting in higher airflow and boost levels. These pulleys are CNC machined from 6061 aluminum and anodized for longevity. Designed to...

    $141.99
    Add to Cart
  • 2 Inch Lift/Jack Pucks (Set of 4) 2 Inch Lift/Jack Pucks (Set of 4) 2 Inch Lift/Jack Pucks (Set of 4)

    2 Inch Lift/Jack Pucks (Set of 4)

    2 Inch Lift/Jack Pucks (Set of 4)   These billet aluminum jack pucks will save your side skirts when lifting your car with a 4 post lift or a floor jack. They have a t-post that fits in the factory body slots and provides a solid lifting point...

    $124.99
    Add to Cart
  • GM Continental Flex Fuel Sensor

    GM Continental Flex Fuel Sensor

    GM Continental Flex Fuel Sensor   OEM Part Number 13577429 This is an OEM flex fuel sensor from GM. This sensor can be added to most GM vehicles with the proper associated wiring.

    $119.99
    Add to Cart
  • IAT / Baro Breakout Harness for Gen V

    IAT / Baro Breakout Harness for Gen V

    DSX IAT/BARO Breakout Harness The DSX IAT/baro Breakout harness allows you to remove the IAT from the MAF assembly on newer vehicles so you can place it closer to the throttle for applications using methanol injection to meet fueling requirements. It...

    $205.00
    Choose Options
  • DMS 50mm Supercharger Idler Pulley – High RPM Billet Design for LS9 & LSA Systems DMS 50mm Supercharger Idler Pulley – High RPM Billet Design for LS9 & LSA Systems DMS 50mm Supercharger Idler Pulley – High RPM Billet Design for LS9 & LSA Systems

    DMS 50mm Supercharger Idler Pulley

    DMS 50mm Supercharger Idler Pulley – High RPM Billet Design for LS9 & LSA Systems Precision-engineered for high-performance supercharged setups While 50mm idler pulleys are often considered less ideal due to the stress high RPMs place on...

    $99.99
    Add to Cart
  • Trick Flow Flywheel Holding Tools for GM LS

    Trick Flow Flywheel Holding Tools for GM LS

    Trick Flow Flywheel Holding Tools for GM LS   DescriptionTorque your harmonic balancer bolt on your LS engine with ease using Trick Flow® flywheel holding tools for GM LS. These specially made tools will hold your crankshaft in place while you...

    $99.97
    Add to Cart
  • 10 Rib 70mm Idler Pulley 10 Rib 70mm Idler Pulley

    10 Rib 70mm Idler Pulley

    10 Rib 70mm Idler Pulley   This pulley is used in the DMS 10 rib kit and can actually accept an 11 rib belt making it acceptable to run on the LS9 belt drive. However this product is designed to replace the factory lower idler on the LSA drive...

    $89.99
    Add to Cart
  • DMS Wide LT4 Tensioner Pulley – Fix Belt Walk & Squeal for Good DMS Wide LT4 Tensioner Pulley – Fix Belt Walk & Squeal for Good DMS Wide LT4 Tensioner Pulley – Fix Belt Walk & Squeal for Good

    DMS Wide LT4 Tensioner Pulley

    DMS Wide LT4 Tensioner Pulley – Fix Belt Walk & Squeal for Good If you’ve noticed belt squeal, chirping, or even found a rib missing on your LT4 supercharger belt, chances are the OEM tensioner pulley is to blame. Dedicated Motorsports...

    $89.99
    Add to Cart
  • Genuine GM LS9 Head Gasket

    Genuine GM LS9 Head Gasket

    Genuine GM LS9 Head Gasket Price is each you will need 2   These are the gaskets we use on Turbocharged, Supercharged and Nitrous applications. The LS9 gaskets feature a 7-layer MLS construction that can used an anything up to a 4.100" Bore. These...

    $89.99
    Add to Cart
  • DMS 100mm LSA LS9 Supercharger Idler Pulley

    DMS 100mm LSA LS9 Supercharger Idler Pulley

    DMS 100mm LSA/LS9 Supercharger Idler Pulley Maximize belt wrap and ensure consistent boost with the DMS 100mm Supercharger Idler Pulley. Designed for LSA and LS9 supercharger systems, this pulley is a crucial upgrade when using smaller upper pulleys,...

    $84.99
    Add to Cart
  • DMS 76mm LSA LS9 Supercharger Idler Pulley DMS 76mm LSA LS9 Supercharger Idler Pulley DMS 76mm LSA LS9 Supercharger Idler Pulley

    DMS 76mm LSA LS9 Supercharger Idler Pulley

    DMS 76mm LSA LS9 Supercharger Idler Pulley The DMS 76mm idler pulley is commonly used on the LS9 belt system to help establish the proper belt length/tension. These pulleys are made out of 6061 billet aluminum, anodized black and comes standard with a...

    $84.99
    Add to Cart
  • ACDelco LS9 Plug Wire Set

    ACDelco LS9 Plug Wire Set

    ACDelco LS9 Plug wire set   This wire set was originally found on the C6 ZR1 LS9 engine but will fit a number of different engines and is the choice wire set for many DMS builds.   (Price is for a set of 8 wires, no metal shields included)

    $81.99
    Add to Cart
  • NGK IRIDIUM SPARK PLUGS LTR7IX-11 SET OF (8)

    NGK IRIDIUM SPARK PLUGS LTR7IX-11 SET OF (8)

    NGK IRIDIUM SPARK PLUGS LTR7IX-11 SET OF (8) Weight: 0.14lbs Center Electrode Core Material: Copper Center Electrode Design: Fine Wire Center Electrode Tip Material: Iridium Drive Size: 5/8 in Electrical Terminal...

    $79.99
    Add to Cart
  • Baro Breakout Harness for Gen V

    Baro Breakout Harness for Gen V

    DSX BARO Breakout Harness for Gen V The DSX Baro Breakout Harness breaks out the barometric pressure sensor, which allows the calibrator to restore proper calculations in the ECM for pressure ratio on boosted applications. The 3 bar MAP sensor is not...

    $69.99
    Choose Options
  • GM Intake Air Temp Sensor

    GM Intake Air Temp Sensor

    GM Intake Air Temp Sensor   This intake air temp sensor is commonly found on the LSA and LS9 supercharger lids but is also frequently used on custom projects or swap vehicles. GM part number 12614717. We also offer an aluminum weld on bung threaded...

    $65.99
    Choose Options
  • Griptec MKII 10 Bolt Supercharger hub for LSA

    Griptec MKII 10 Bolt Supercharger hub for LSA

    Griptec MKII 10 Bolt Supercharger hub for LSA   The ZPE MKII hub is designed to allow for the smallest pulleys possible on factory GM vehicles. With a OD of 1.86" pulley sizes under 2.15 are possible. We machine our hubs to be within +_ 0.00015 on...

    $64.99
    Add to Cart
  • GM 3-Bar MAP Sensor – LSA / LS9 (Blue Label – P/N 55567257)GM 3-Bar MAP Sensor – LSA / LS9 (Blue Label – P/N 55567257)

    GM 3 Bar Map Sensor LSA-LS9 (BLUE)

    GM 3-Bar MAP Sensor – LSA / LS9 (Blue Label – P/N 55567257) Upgrade your boosted build with the trusted GM 3-Bar MAP Sensor, the same sensor found on factory supercharged LSA and LS9 engines. Ideal for high-boost applications, this sensor is...

    $62.99
    Add to Cart
  • DMS Auxiliary Fuel Pump Kit Optional Drill & Tap

    DMS Auxiliary Fuel Pump Kit Optional Drill & Tap

    DMS Auxiliary Fuel Pump Kit Optional Drill & Tap Need to purchase the correct drill and tap kit for the DSX Auxiliary Fuel Pump Kit for your ZL1, CTS-V, or C6/Z06 Corvette? Look no further! This kit is the only recommended kit that includes both the...

    $50.00
    Add to Cart
  • DMS Billet Center Cap for Weld Wheels 31mm Height DMS Billet Center Cap for Weld Wheels 31mm Height DMS Billet Center Cap for Weld Wheels 31mm Height DMS Billet Center Cap for Weld Wheels 31mm Height DMS Billet Center Cap for Weld Wheels 31mm Height

    DMS Billet Center Cap for Weld Wheels 31mm Height

    DMS Billet Center Cap for Weld Wheels 31mm Height Clean up the look look of your weld wheels with this new center cap option from Dedicated Motorsports. These caps are cnc machined from 6061 aluminum and anodized to match the weld wheel color. These caps...

    $49.99 - $59.99
    Choose Options
  • DMS Billet Center Cap for Weld Wheels 36mm Height DMS Billet Center Cap for Weld Wheels 36mm Height DMS Billet Center Cap for Weld Wheels 36mm Height DMS Billet Center Cap for Weld Wheels 36mm Height DMS Billet Center Cap for Weld Wheels 36mm Height

    DMS Billet Center Cap for Weld Wheels 36mm Height

    DMS Billet Center Cap for Weld Wheels 36mm Height Clean up the look look of your weld wheels with this new center cap option from Dedicated Motorsports. These caps are cnc machined from 6061 aluminum and anodized to match the weld wheel color (non faded)...

    $49.99 - $59.99
    Choose Options
  • DMS Billet Y-Fitting 1.00*3/4*3/4 DMS Billet Y-Fitting 1.00*3/4*3/4 DMS Billet Y-Fitting 1.00*3/4*3/4

    DMS Billet Y-Fitting 1.00*3/4*3/4

    DMS Billet Y-Fitting – 1.00" x 3/4" x 3/4" Say goodbye to cracked plastic Y-fittings. The Dedicated Motorsports Billet Y-Fitting offers a high-strength, long-lasting solution for your cooling or fluid routing setup. Precision-machined from 6061...

    $44.99
    Choose Options
  • DMS Billet Y-Fitting 3/4*3/4*3/4 DMS Billet Y-Fitting 3/4*3/4*3/4 DMS Billet Y-Fitting 3/4*3/4*3/4

    DMS Billet Y-Fitting 3/4*3/4*3/4

    DMS Billet Y-Fitting 3/4*3/4*3/4   Tired of plastic fittings breaking after a couple month of use? Dedicated Motorsports has a solution for you. These billet 3/4 inch Y-fittings are made from billet 6061 aluminum and anodized black for...

    $44.99
    Choose Options
  • DMS Remote Mount GM 3 Bar Map Sensor DMS Remote Mount GM 3 Bar Map Sensor DMS Remote Mount GM 3 Bar Map Sensor

    DMS Remote Mount GM 3 Bar Map Sensor

    DMS Remote Mount GM 3 Bar Map Sensor   The DMS billet remote mount GM map sensor fitting is perfect for any engine with aftermarket intake manifolds lacking OEM map sensor provisions. The flange is designed for all Gen 4 or Gen 5 three wire sensors...

    $38.99
    Choose Options
  • DMS 1/8" NPT MAP Sensor Adapter for GM LS Engines Introducing the DMS 1/8" NPT MAP Sensor Adapter, a versatile solution for expanding your GM LS engine's monitoring capabilities. This adapter allows you to easily tap into the manifold pressure source on LS3, LSA, and LS9 style MAP sensors, providing a convenient 1/8" NPT port for connecting a higher-range MAP sensor or other boost-related devices. DMS 1/8" NPT MAP Sensor Adapter for GM LS Engines Introducing the DMS 1/8" NPT MAP Sensor Adapter, a versatile solution for expanding your GM LS engine's monitoring capabilities. This adapter allows you to easily tap into the manifold pressure source on LS3, LSA, and LS9 style MAP sensors, providing a convenient 1/8" NPT port for connecting a higher-range MAP sensor or other boost-related devices. DMS 1/8" NPT MAP Sensor Adapter for GM LS Engines Introducing the DMS 1/8" NPT MAP Sensor Adapter, a versatile solution for expanding your GM LS engine's monitoring capabilities. This adapter allows you to easily tap into the manifold pressure source on LS3, LSA, and LS9 style MAP sensors, providing a convenient 1/8" NPT port for connecting a higher-range MAP sensor or other boost-related devices.

    GM 1/8 NPT Map Sensor Adapter

    GM 1/8 NPT Map Sensor Adapter DMS 1/8" NPT MAP Sensor Adapter for GM LS Engines Introducing the DMS 1/8" NPT MAP Sensor Adapter, a versatile solution for expanding your GM LS engine's monitoring capabilities. This adapter allows you to easily tap into...

    $38.99
    Choose Options
  • Sale
    ZR1 EMP Pump Bracket ZR1 EMP Pump Bracket ZR1 EMP Pump Bracket ZR1 EMP Pump Bracket ZR1 EMP Pump Bracket

    ZR1 EMP Pump Bracket

    ZR1 EMP Pump Bracket   This bracket is designed to mount an EMP coolant pump near the factory coolant pump location for the C6 ZR1. The bracket is CNC machined out of a single piece of 6061 billet aluminum and anodized black. Four M8X1.25...

    Was: $49.99
    Now: $37.99
    Add to Cart
  • LT4 Supercharger Valley Plug – Reduce Oil Blow-By and Improve Intercooler Efficiency

    LT4 Valley Plug

    LT4 Supercharger Valley Plug – Reduce Oil Blow-By and Improve Intercooler Efficiency Keep your LT4 running cleaner and cooler with the Dedicated Motorsports LT4 Valley Plug. This precision CNC-machined billet plug is designed to block the oil...

    $35.00
    Add to Cart
150 of 182 Items

© 2025 Dedicated Motorsports Solutions Powered by BigCommerce All rights reserved. | Sitemap