Corvette

ARP Gen 4 Head Bolt Kit

ARP Gen 4 Head Bolt Kit   Head Bolt Kit:Chevrolet Small Block, 2004 & later, with all same length bolts, hexKit #: 134-3610Kit Instructions

LS Accel Ceramic Plug Wires

LS Accel Extreme 9000 Ceramic Spark Plug Wires High Heat Race-Ready Ignition Protection Tired of burning spark plug wires on your high-performance LS engine? ACCEL has the ultimate solution for race and street/strip applications where high under-hood...

LT5 11 Rib ZPE GripTec® 2pc MKII L2V Black Pulley Only

Eibach C6/C7 Corvette Lower Bolts

Eibach C6/C7 Corvette Lower Bolts   Drop of 0-2.5" Kit consists of height adjustment bolts and urethane pads (not a spring kit). Does not fit Z07 package.

Hawk Performance Brake Pads Rear

Hawk Performance Brake Pads Rear High Performance Street 5.0 Brake Pads; w/ 0.770 ThicknessFor years, engine builders have been pushing motors to the limits of their ability, and at Hawk Performance, we're closer than ever to pushing the ABS Rev Limiter...

Hawk Performance Corvette C8 Base Model, Performance Ceramic Street Rear Brake Pads

Hawk Performance Corvette C8 Performance Ceramic Street Rear Brake Pads - Base Model (Non Z51) Only   - Extremely quiet- Ultra-low dust- Improved stopping power- Gentle on rotors for extended pad life- Stable friction output- All Hawk Performance...

LT4 Supercharger Griptec MKII Pulley- NO HUB

LT4 Supercharger Griptec MKII Pulley- NO HUB This is a replacement 2.30" or 2.50" Griptec Pulley for the LT4 Supercharger. No hub or bolts included.

ACDelco LT4 Supercharger Belt Tensioner

ACDelco LT4 Supercharger Belt Tensioner Part Number: 12663624

ACDelco LS9 Plug Wire Set

ACDelco LS9 Plug wire set   Old part number: 19351570 New Part Number: 12731654   This wire set was originally found on the C6 ZR1 LS9 engine but will fit a number of different engines and is the choice wire set for many DMS builds...

GM Continental Flex Fuel Sensor

GM Continental Flex Fuel Sensor   OEM Part Number 13577429 This is an OEM flex fuel sensor from GM. This sensor can be added to most GM vehicles with the proper associated wiring.

DSX Tuning LT4 9.45" Lower Pulley (dry sump C7Z) "Open box"

DSX Tuning LT4 9.45" Lower Pulley (dry sump C7Z) " Open Box" This is an open box item but otherwise its brand new These lower pulleys are compatible with ATI part number 917315 for the C7 LT4 damper. They are machined from 6061 aluminum and...

LT4 High Pressure Rail Crossover Fuel Line

LT4 High Pressure Rail Crossover Fuel Line     These fuel lines are a one time use and need to be replaced each time they're removed. Both part numbers 12647277 and 12677005

Trick Flow Flywheel Holding Tools for GM LS/LT Engines

Trick Flow Flywheel Holding Tools for GM LS/LT Engines   DescriptionTorque your harmonic balancer bolt on your LS engine with ease using Trick Flow® flywheel holding tools for GM LS/LT Engines. These specially made tools will hold your...

Deposit for in house dyno tuning on our Mainline hub dyno

Deposit for in house dyno tuning on our Mainline hub dyno This is designed to hold your spot in line, to setup a date or ask additional questions please email matt@dedicatedmotorsports.com The price listed in the dropdown section will be due on the day...

IAT / Baro Breakout Harness for Gen V

DSX IAT/BARO Breakout Harness The DSX IAT/baro Breakout harness allows you to remove the IAT from the MAF assembly on newer vehicles so you can place it closer to the throttle for applications using methanol injection to meet fueling requirements. It...

ACDelco LT5 Grooved 11 Rib Supercharger Idler Pulley

ACDelco LT5 Grooved 11 Rib Supercharger Idler Pulley Part Number: 12665034   This 11 rib idler pulley is found on the drivers side tensioner bracket of the LT5 engine and is a part of the supercharger belt system. 

ACDelco O2 Sensor (Bank 1/2 Oxygen Sensor)

ACDelco O2 Sensor (Bank 1/2 Oxygen Sensor) Part Numbers: 12617332, 2134408 Sold individually, two required per vehicle

Genuine GM LS9 Head Gasket

Genuine GM LS9 Head Gasket Price is each you will need 2   These are the gaskets we use on Turbocharged, Supercharged and Nitrous applications. The LS9 gaskets feature a 7-layer MLS construction that can used an anything up to a 4.100" Bore. These...

Lingenfelter LSA and LS9 10 bolt Supercharger Pulley Hub

Lingenfelter LSA and LS9 10 bolt Supercharger Pulley Hub   DescriptionBorn from the speed team that built the first Comp car to break the 6-second quarter-mile, these Lingenfelter Performance Engineering supercharger hubs give you the power to...

6" Screened Velocity Stack for cold air intake systems or turbos

6" Screened Velocity Stack for Cold Air Intake Systems or Turbos   This screen is a great way to make 20-60hp on your supercharged setup during race time. Its common for most intake systems to come with a fairly restrictive air filter element. The...

Baro Breakout Harness for Gen V

DSX BARO Breakout Harness for Gen V The DSX Baro Breakout Harness breaks out the barometric pressure sensor, which allows the calibrator to restore proper calculations in the ECM for pressure ratio on boosted applications. The 3 bar MAP sensor is not...

Eaton Supercharger Solid Isolator Coupling LSA, LS9

Eaton Supercharger Solid Isolator Coupling LSA, LS9   Eaton Supercharger Solid Isolator Coupling LSA and LS9 Superchargers. Eliminates the rattle prone to the stock isolators. 

LT4 High Pressure Intermediate Fuel Line

LT4 High Pressure Intermediate Fuel Line   These fuel lines are a one time use and need to be replaced each time they're removed. Both part numbers 12647277 and 12677005

NGK IRIDIUM SPARK PLUGS LTR7IX-11 SET OF (8)

NGK IRIDIUM SPARK PLUGS LTR7IX-11 SET OF (8) Weight: 0.14lbs Center Electrode Core Material: Copper Center Electrode Design: Fine Wire Center Electrode Tip Material: Iridium Drive Size: 5/8 in Electrical Terminal...

NGK IRIDIUM SPARK PLUGS TR7IX SET OF (8)

NGK IRIDIUM SPARK PLUGS TR7IX SET OF (8) Weight: 0.10lbs Center Electrode Core Material: Copper Center Electrode Design: Fine Wire Center Electrode Tip Material: Iridium Drive Size: 5/8 in Electrical Terminal Type: Non-Removable Nut Gap - Factory...

ACDelco LT Upstream 02 Sensor ( Bank 1/2 oxygen sensor)

ACDelco LT Upstream 02 Sensor ( Bank 1/2 oxygen sensor) Part Number: 12655677 Sold individually, two needed per vehicle

ACDelco LT4 Grooved Idler Pulley on Tensioner Bracket

ACDelco LT4 Grooved Idler Pulley on Tensioner Bracket Part Number: 12678515

C7 Corvette Front Subframe Spacers .240"

C7 Corvette Front Subframe Spacers .240"   Larger superchargers or port injection plates often times limit your hood or cowl clearance. These washers will space the engine/subframe away from the body my .240" and is generally enough to give these...

Polished DMS Billet Center Cap for Weld Wheels 31mm Height

Polished DMS Billet Center Cap for Weld Wheels 31mm Height Clean up the look look of your weld wheels with this new center cap option from Dedicated Motorsports. These caps are cnc machined from 6061 aluminum and anodized to match the weld wheel color...

Polished DMS Billet Center Cap for Weld Wheels 36mm Height

Polished DMS Billet Center Cap for Weld Wheels 36mm Height Clean up the look look of your weld wheels with this new center cap option from Dedicated Motorsports. These caps are cnc machined from 6061 aluminum and anodized to match the weld wheel color...

GM Intake Air Temp Sensor

GM Intake Air Temp Sensor   This intake air temp sensor is commonly found on the LSA and LS9 supercharger lids but is also frequently used on custom projects or swap vehicles. GM part number 12614717. We also offer an aluminum weld on bung threaded...

Griptec MKII 10 Bolt Supercharger hub for LSA, LS9, LT4, LT5 Blowers

Griptec MKII 10 Bolt Supercharger hub for LSA, LS9, LT4, LT5 Blowers   The ZPE MKII hub is designed to allow for the smallest pulleys possible on factory GM vehicles. With a OD of 1.86" pulley sizes under 2.15 are possible. We machine our hubs to be...

GM 3 Bar Map Sensor LSA-LS9 (BLUE)

GM 3-Bar MAP Sensor – LSA / LS9 (Blue Label – P/N 55567257) Upgrade your boosted build with the trusted GM 3-Bar MAP Sensor, the same sensor found on factory supercharged LSA and LS9 engines. Ideal for high-boost applications, this sensor is...

DSX GM Push Connect Coupler

DSX GM Push Connect Coupler These DSX original fittings are made from 6061 and then anodized black and laser engraved. They make connecting two male GM push connect ends a snap. Unlike other fittings out there that use difficult to deal with backing...

Fuelab 6 micron / Micro-Fiberglass 3" Replacement Element

Fuelab 6 micron / Micro-Fiberglass 3" Replacement Element   6 micron / Micro-Fiberglass Element - Our most advanced filter element provides extra particle protection and reduces maintenance requirements with improvements in filter efficiency. This...

LS Valve Cover Gaskets (Pair)

LS Valve Cover Gaskets (Pair) OEM Part Numbers: 12637683   This is a pair of genuine GM valve cover gaskets for LS valve covers.

Injector Dynamics Replacement Filter Element for ID F750 Fuel Filter

Injector Dynamics Replacement Filter Element for ID F750 Fuel Filter

DMS Auxiliary Fuel Pump Kit Optional Drill & Tap

DMS Auxiliary Fuel Pump Kit Optional Drill & Tap Need to purchase the correct drill and tap kit for the DSX Auxiliary Fuel Pump Kit for your ZL1, CTS-V, or C6/Z06 Corvette? Look no further! This kit is the only recommended kit that includes both the...

ACDelco LT1/LT2/LT4/LT5 Timing Chain Tensioner

ACDelco LT1/LT2/LT4/LT5 Timing Chain Tensioner Part Number: 12630107   The timing chain tensioner is a wear item so it's a good idea to replace this during a cam install.  

DMS Billet Center Cap for Weld Wheels 36mm Height

DMS Billet Center Cap for Weld Wheels 36mm Height Clean up the look look of your weld wheels with this new center cap option from Dedicated Motorsports. These caps are cnc machined from 6061 aluminum and anodized to match the weld wheel color (non faded)...

LT4 Supercharger Inlet Pressure Sensor Relocation Kit - Cutaway Creations

LT4 Supercharger Inlet Pressure Sensor Relocation Kit - Cutaway Racing   Cutaway Racing GM LT4 Supercharger Inlet Map sensor relocation kit   Clean and Simple way to re position the Supercharger inlet sensor on LT4 super chargers with bigger...

ARP "Long" LS7, LS9, LT4 dry sump crank balancer bolt

ARP "Long" LS7, LS9, LT4 dry sump crank balancer bolt   This is the long crank balancer bolt for all LS7, LS9 and LT4 DRY SUMP engines. 

ARP GM LS1/LS2/LS3/LS6/LSA 5.7L/6.0L Wet Sump LT4 Balancer Bolt Kit

ARP GM LS1/LS2/LS3/LS6/LSA 5.7L/6.0L and Wet sump LT4 Balancer Bolt Kit       Chevrolet Gen III/IV LS Series small block (except LS7)Kit #: 234-2503Specifications:UHL: 4.325˝Thread Size: M16 x 2.00Wrenching: 1-1/16˝Washer Included: Yes

CBI STREETCARS DOD / AFM CONVERSION PLUG SET (8)

CBI STREETCARS DOD / AFM CONVERSION PLUG SET (8)

LS3 MAF Mass Air Flow Sensor Weld Bung (for LS Custom Intake Tube)

Mass Air Flow Mounting Flange Compatible with LS3,LS7, VW, and all GM LT series engines 2014 and newer (see below) Radius cut on bottom to accept 4" pipe (can be used with 2.5"-5" pipe with more weld) Made in Wichita, Kansas from 6061-T6, USA produced,...

ACDelco Front main seal

ACDelco Front main seal Part Number: 12585673   This front main seal will work on all boosted engines. LS3, LSA, LS9, LT1, LT4. It's a highly universal seal to be used in all LS and LT engines. 

ARP GM Wheel Studs M12 size

ARP GM Wheel Studs M12 size Part Number: 100-7726   These fit a number of GM vehicles with M12 studs. 

LS 160 Degree Thermostat

LS 160 Degree Thermostat Enhance your engine's performance and longevity with the Lingenfelter 160 Degree Thermostat. This premium-quality thermostat is designed for a wide range of General Motors applications, offering a direct, drop-in replacement...

LSA and LT4 Gates HD Green Belts

LSA and LT4 Gates HD Green Belts Increased strength and accuracy for all LSA applications. A good investment for any level of build to gain more reliability and durability. Use the pulley chart to find the proper fitment for your application. 

ARP LS1 Chevy Cam Bolt Kit

ARP LS1 Chevy Cam Bolt Kit End your camshaft timing worries! High-quality ARP cam bolts have increased preload clamping force to ensure positive timing gear register. Their increased material strength overcomes valvetrain harmonics and stress. These cam...