ZL1 Lids are on indefinite backorder at this time

phone: 512-402-7495
38 of 38 Items
  • C&R Primary Heat Exchanger '16-'19 CTS-V C&R Primary Heat Exchanger '16-'19 CTS-V C&R Primary Heat Exchanger '16-'19 CTS-V

    C&R Primary Heat Exchanger '16-'19 CTS-V

    C&R Primary Heat Exchanger LT4   DescriptionThe C&R 2016+ CTS-V and 2017+ Camaro ZL1heat exchanger mounts in the stock location, using factory hoses and clamps. Using 27mm race core, same core we used in NASCAR radiators, it will keep the...

    $895.00
  • CSF C7Z Triple Pass Radiator CSF C7Z Triple Pass Radiator CSF C7Z Triple Pass Radiator CSF C7Z Triple Pass Radiator

    CSF C7Z Triple Pass Radiator

    CSF C7Z Triple Pass Radiator Dedicated Motorsports has recently partnered with CSF, the cooling experts for over four decades, to create our highly engineered DMS C7 Drop In Radiator. Countless hours of engineering and testing were put into manufacturing...

    $699.99
  • Dedicated Motorsports Heat Exchanger C7 Z06 Dedicated Motorsports Heat Exchanger C7 Z06 Dedicated Motorsports Heat Exchanger C7 Z06

    Dedicated Motorsports Heat Exchanger C7 Z06

    Dedicated Motorsports Heat Exchanger C7 Z06 Dedicated Motorsports has recently partnered with CSF, the cooling experts for over four decades, to create our highly engineered DMS C7 Heat Exchanger. Countless hours of engineering and testing were put into...

    $599.99
  • Reprogrammed EMP E2512A Electric Water Pump Reprogrammed EMP E2512A Electric Water Pump Reprogrammed EMP E2512A Electric Water Pump Reprogrammed EMP E2512A Electric Water Pump

    Reprogrammed EMP E2512A Electric Water Pump

    Reprogrammed EMP E2512A Electric Water Pump The E2512A is a high performance, long life, severe duty electric water pump used in cooling systems in extreme environments. It is used in the transit bus market, off road applications, power grid battery...

    $499.99
  • Sale
    DMS ZL1 2 Gallon Supercharger Fender Tank DMS ZL1 2 Gallon Supercharger Fender Tank DMS ZL1 2 Gallon Supercharger Fender Tank DMS ZL1 2 Gallon Supercharger Fender Tank DMS ZL1 2 Gallon Supercharger Fender Tank

    DMS ZL1 2 Gallon Supercharger Fender Tank

    DMS ZL1 2 Gallon Supercharger Fender Tank The Dedicated Motorsports coolant expansion tank for the 2018-2020 Camaro ZL1 adds 2 gallons of additional coolant capacity. This additional volume will not only help keep intake air temps lower but it will also...

    Was: $499.99
    Now: $425.00
  • Sale
    CTS-V Engine Bay Tank CTS-V Engine Bay Tank CTS-V Engine Bay Tank CTS-V Engine Bay Tank

    CTS-V Engine Bay Tank

    DMS Engine Bay Tank The DMS engine bay tank is an easy bolt on solution to increase the supercharger coolant capacity on your 09-15 CTS-V. This tank takes advantage of all the available space of the 09-15 CTS-V's engine bay. Starting with a CAD model the...

    Was: $449.99
    Now: $400.00
  • Sale
    DMS V2 Coupe 6 Gallon Trunk Tank DMS V2 Coupe 6 Gallon Trunk Tank DMS V2 Coupe 6 Gallon Trunk Tank DMS V2 Coupe 6 Gallon Trunk Tank DMS V2 Coupe 6 Gallon Trunk Tank

    DMS V2 Coupe 6 Gallon Trunk Tank

    DMS 2009-2015 CTS-V Coupe 6 Gallon Trunk Ice Tank If you're looking to add more coolant capacity to your 2009-2015 CTS-V Coupe, look no further. DMS brings you a 6 gallon trunk mounted ice tank that sits flush with the Coupe floor. This is the least...

    Was: $449.99
    Now: $399.99
  • Pierburg CWA100-3 PNP Coolant Pump Pierburg CWA100-3 PNP Coolant Pump Pierburg CWA100-3 PNP Coolant Pump Pierburg CWA100-3 PNP Coolant Pump

    Pierburg CWA100-3 PNP Coolant Pump

    Pierburg CWA100-3 PNP Coolant Pump kitCurrently out of stock. If you order, we will be substituting with the CWA100-2. It has the same flow rating. The inlet/outlet ports are .5 inch longer and the orientation of the plug is different. However, this will...

    $389.99
  • Pierburg CWA150 Pierburg CWA150

    Pierburg CWA150

    Pierburg CWA150 PNP Coolant Pump kit Dedicated Motorsports brings you a plug and play solution to replace the factory supercharger cooling pump found on the Gen2 CTS-V and ZR1 Corvette. The CWA150 flows better than the very popular Varimax pump and is a...

    $389.99
  • CPR V3/ZL1 Engine Bay Tank CPR V3/ZL1 Engine Bay Tank CPR V3/ZL1 Engine Bay Tank

    CPR V3/ZL1 Engine Bay Tank

    CPR V3/ZL1 Engine Bay Tank   Cordes Performance 6th gen Camaro ZL1/ Cadillac V3 CTSV engine bay expansion tank adds just under 1 gallon of extra capacity. No need to buy the expensive tool from GM to bleed the supercharger cooling system! Includes...

    $375.00
  • Pierburg CWA50

    Pierburg CWA50

    Pierburg CWA50 Dedicated Motorsports brings you a plug and play solution to replace the factory supercharger cooling pump found on the Gen2 CTS-V. The CWA50 outflows the popular Varimax pump and is a direct replacement. The DMS kit will come with a plug...

    $319.99
  • Sale
    DMS V3/ZL1 Engine Bay Tank DMS V3/ZL1 Engine Bay Tank DMS V3/ZL1 Engine Bay Tank DMS V3/ZL1 Engine Bay Tank

    DMS V3/ZL1 Engine Bay Tank

    DMS V3/ZL1 Engine Bay Tank The Dedicated Motorsports coolant expansion tank for the 2016-2019 CTS-V and 2018-2020 Camaro ZL1 adds just under 1 gallon of additional coolant capacity. This additional volume will not only help keep intake air temps lower...

    Was: $349.99
    Now: $299.99
  • LS9 ZR1 DMS Blower Blocks LS9 ZR1 DMS Blower Blocks

    LS9 ZR1 DMS Blower Blocks

    LS9 ZR1 DMS Blower Blocks   These billet coolant blocks are perfect for guys looking to upgrade the cooling system found on the 2009-2013 ZR1 Corvette with the LS9 supercharger. These blocks are cnc machined out of 6061 aluminum and anodized for...

    $250.00
  • Billet -12 ORB ZL1 Coolant Manifold Billet -12 ORB ZL1 Coolant Manifold Billet -12 ORB ZL1 Coolant Manifold Billet -12 ORB ZL1 Coolant Manifold Billet -12 ORB ZL1 Coolant Manifold

    Billet -12 ORB ZL1 Coolant Manifold

    Billet -12 ORB ZL1 Coolant Manifold For years, the only method for converting the ZL1 inlet/outlet coolant ports to -12an was to machine and weld the factory cast aluminum piece. After proving this process on over 6000 OEM pieces we decided to bring this...

    $150.00
  • PNP EMP Pump Harness for Trunk Tank

    PNP EMP Pump Harness for Trunk Tank

    PNP EMP Pump Harness for Trunk Tank This plug and play harness is designed for the Stewart Warner EMP pump using a 4 pin DT connector. Since these pumps have a heavy amp draw we designed this harness with 10 gauge wire and a over sized fuse assembly. The...

    $99.99
  • DMS CTS-V -12AN Billet Water Manifold DMS CTS-V -12AN Billet Water Manifold DMS CTS-V -12AN Billet Water Manifold

    DMS CTS-V -12AN Billet Water Manifold

    DMS CTS-V -12AN Billet Water Manifold   Dedicated Motorsports brings you our billet aluminum constructed -12an in/out manifold for your CTS-V Lid, made here in-house. This piece uses factory hardware and O-ring, and is quick and easy to install...

    $90.00
  • DMS Billet Y-Fitting 1.00*3/4*3/4 DMS Billet Y-Fitting 1.00*3/4*3/4 DMS Billet Y-Fitting 1.00*3/4*3/4

    DMS Billet Y-Fitting 1.00*3/4*3/4

    DMS Billet Y-Fitting 1.00*3/4*3/4 Tired of plastic fittings breaking after a couple month of use? Dedicated Motorsports has a solution for you. These billet 3/4 inch to 1.00" y-fittings are made from billet 6061 aluminum and anodized black for...

    $45.00
  • DMS Billet Y-Fitting 3/4*3/4*3/4 DMS Billet Y-Fitting 3/4*3/4*3/4 DMS Billet Y-Fitting 3/4*3/4*3/4

    DMS Billet Y-Fitting 3/4*3/4*3/4

    DMS Billet Y-Fitting 3/4*3/4*3/4 Tired of plastic fittings breaking after a couple month of use? Dedicated Motorsports has a solution for you. These billet 3/4 inch y-fittings are made from billet 6061 aluminum and anodized black for anti-corrosion...

    $45.00
  • LSA Coolant Steam Port Push Lock Fitting 90 degree LSA Coolant Steam Port Push Lock Fitting 90 degree

    LSA Coolant Steam Port Push Lock Fitting 90 degree

    LSA Coolant Steam Port Push Lock Fitting 90 degree version   Its quite common to break these while working on the cooling system. We keep these new GM replacements in stock for this reason. Note: This is the 90 degree fitting found on the passenger...

    $36.99
  • LSA Coolant Steam Port Push Lock Fitting Straight LSA Coolant Steam Port Push Lock Fitting Straight

    LSA Coolant Steam Port Push Lock Fitting Straight

    LSA Coolant Steam Port Push Lock Fitting Straight version   Its quite common to break these while working on the cooling system. We keep these new GM replacements in stock for this reason. Note: This is the straight fitting found on the drivers side...

    $36.99
  • Lingenfelter 160 Degree Thermostat

    Lingenfelter 160 Degree Thermostat

    Lingenfelter 160 Degree Thermostat   Lingenfelter offers this premium quality 160 degree thermostat for General Motors Applications. This is a direct drop in with no modifications needed and includes the rubber seal.   Reducing coolant...

    $32.99
  • Coolant Crossover Adapter Ports Coolant Crossover Adapter Ports Coolant Crossover Adapter Ports

    Coolant Crossover Adapter Ports

    Coolant Crossover Adapter Ports Compatible with all LS series engines Includes: 2 coolant ports, 2 O-rings and 2 bolts 1/8" NPT threaded holes to crossover steam/coolant from cylinder heads Can be installed on the front or rear of the cylinder...

    $29.99
  • 3/4 Inch Billet Tee Fitting 3/4 Inch Billet Tee Fitting 3/4 Inch Billet Tee Fitting 3/4 Inch Billet Tee Fitting 3/4 Inch Billet Tee Fitting

    3/4 Inch Billet Tee Fitting

    3/4 Inch Billet Tee Fitting The DMS 3/4 inch tee fittings is machined out of a solid piece of 6061 aluminum and anodized to prevent corrosion. These are a great way to tee off coolant lines on cooling systems with multiple intercoolers and are a more...

    $26.99
  • -12an Quick Connect Adapter GM LSA, LS9, LT4, LT5 -12an Quick Connect Adapter GM LSA, LS9, LT4, LT5

    -12an Quick Connect Adapter GM LSA, LS9, LT4, LT5

    -12an Quick Connect Adapter GM LSA, LS9, LT4, LT5 This fitting is designed to adapt the GM 5/8 Quick connect found on most GM supercharger coolant lines to a more common -12an male fitting. Allowing the use of a larger diameter hose and endless...

    $24.99
  • -12an Low Profile 90-degree Swivel Hose End (Black) -12an Low Profile 90-degree Swivel Hose End (Black) -12an Low Profile 90-degree Swivel Hose End (Black) -12an Low Profile 90-degree Swivel Hose End (Black)

    -12an Low Profile 90-degree Swivel Hose End (Black)

    -12an Low Profile 90-degree Swivel Hose End (Black) These -12an 90 degree hose ends are designed for applications where space in front of the fitting are tight but the system demands high flow. We call these full flow because they are forged and have a...

    $22.99
  • Coolant Steam Port Plugs/Block Off Coolant Steam Port Plugs/Block Off Coolant Steam Port Plugs/Block Off

    Coolant Steam Port Plugs/Block Off

    Coolant Steam Port Plugs/Block Off Includes 2 coolant ports, 2 orings, and 2 bolts Compatible with all GM LS series engines Can be installed on the front or rear of the cylinder heads Made in Wichita, Kansas from aerospace grade, USA produced, billet...

    $19.99
  • LT4 Corvette SC Coolant Filler Adapter Tool LT4 Corvette SC Coolant Filler Adapter Tool

    LT4 Corvette SC Coolant Filler Adapter Tool

    LT4 Corvette SC Coolant Filler Adapter Tool Lets face it, the coolant filling system found on the LT4 supercharged C7 Corvette can be a real pain in the butt to fill. Over the years we've tried a number of different solutions but none of them did the job...

    $14.99
  • LT4 SC Coolant Filler Adapter Tool LT4 SC Coolant Filler Adapter Tool LT4 SC Coolant Filler Adapter Tool

    LT4 SC Coolant Filler Adapter Tool

    LT4 SC Coolant Filler Adapter Tool Lets face it, the coolant filling system found on the LT4 supercharged Camaro ZL1 and CTS-V can be a real pain in the butt to fill. Over the years we've tried a number of different solutions but none of them did the job...

    $14.99
38 of 38 Items