null
50 of 67 Items
  • 16+ CTS-V Trunk Tank 16+ CTS-V Trunk Tank 16+ CTS-V Trunk Tank 16+ CTS-V Trunk Tank 16+ CTS-V Trunk Tank

    16+ CTS-V Trunk Tank

    16+ CTS-V Trunk Tank   Lets face it, supercharges make a lot of heat. The best way to fight the heat is with coolant volume and flow.  This trunk mounted ice box will add a little over 6 gallons to your supercharger system while providing an...

    $1,189.99
  • LSA ATI Damper Upper/Lower Pulley Combo

    LSA ATI Damper Upper/Lower Pulley Combo

    LSA ATI Damper Upper/Lower pulley Combo We've put together a winning combination using the best parts avalible for the LSA Supercharger drive system. Choose from a line of ZPE Griptec upper pulleys combined with an ATI Super Damper and lower overdrive...

    $989.99
  • CSF C7 Corvette  Triple Pass Radiator CSF C7 Corvette  Triple Pass Radiator CSF C7 Corvette  Triple Pass Radiator CSF C7 Corvette  Triple Pass Radiator CSF C7 Corvette  Triple Pass Radiator

    CSF C7 Corvette Triple Pass Radiator

    CSF C7 Corvette Triple Pass Radiator     Our friends over at MotoIQ have a Z51 C7 and claim that it’s not rare to see the vehicle (in ideal conditions) hit temperatures around 220-230 degrees, in turn, sending the car into limp...

    $699.99
  • 2016+ CTS-V 1.5 Gallon Fender Expansion Tank 2016+ CTS-V 1.5 Gallon Fender Expansion Tank 2016+ CTS-V 1.5 Gallon Fender Expansion Tank 2016+ CTS-V 1.5 Gallon Fender Expansion Tank 2016+ CTS-V 1.5 Gallon Fender Expansion Tank

    2016+ CTS-V 1.5 Gallon Fender Expansion Tank

    2016+ CTS-V 1.5 Gallon Fender Expansion Tank The Dedicated Motorsports coolant expansion tank for the 2016-2020 CTS-V adds 1.5 gallons of additional coolant capacity for the supercharger system. This additional volume will not only help maintain lower...

    $574.99
  • C7 Engine Bay Tank C7 Engine Bay Tank C7 Engine Bay Tank C7 Engine Bay Tank C7 Engine Bay Tank

    C7 Engine Bay Tank

    C7 Engine Bay Tank   The DMS engine bay tank is designed specifically for the C7 Corvette. It holds ~2 Gallons of additional coolant and provides a 2.5 inch filler cap. This is a great way to combat high intake air temps with your supercharged car...

    $559.99
  • ATI LSA Balancer and Lower Pulley Kit ATI LSA Balancer and Lower Pulley Kit

    ATI LSA Balancer and Lower Pulley Kit

    ATI 7.480" Dia., 2012+ ZL1, '09-'15 CTS-V Harmonic Damper   DetailsThe ATI CTS-V and Camaro ZL1 supercharger overdrive harmonic balancer upgrade kit is designed to enhance the 2009-2014 LSA supercharged engine. The ATI overdrive harmonic balancer...

    $521.19
  • ATI 7.480" Diameter C7 LT1-LT4 DRY SUMP Damper

    ATI 7.480" Diameter C7 LT1-LT4 DRY SUMP Damper

    ATI 7.480" Diameter C7 LT1-LT4 DRY SUMP Damper   Product Description The patented ATI Super Damper is the only crankshaft damper designed exclusively for high performance Chevy engines. Eliminates torsional crankshaft vibrations Exceeds SFI 18.1...

    $513.99
  • Dedicated Motorsports Heat Exchanger C7 Z06 Dedicated Motorsports Heat Exchanger C7 Z06 Dedicated Motorsports Heat Exchanger C7 Z06

    Dedicated Motorsports Heat Exchanger C7 Z06

    Dedicated Motorsports Heat Exchanger C7 Z06   BACK IN STOCK! Dedicated Motorsports has recently partnered with CSF, the cooling experts for over four decades, to create our highly engineered DMS C7 Heat Exchanger. Countless hours of engineering and...

    $499.99
  • DSX LSA Triple Idler for blower drive

    DSX LSA Triple Idler for blower drive

    DSX LSA Triple Idler for blower drive   This triple idler system is intended for the LSA blower drive. It includes three 65mm idler pulleys with enough width to handle up to a 12-rib belt as well as Grade 10.9 hardware (except for the lowermost...

    $400.00
  • 2014-18 Chevrolet/GMC Truck Engine Bay Tank 2014-18 Chevrolet/GMC Truck Engine Bay Tank 2014-18 Chevrolet/GMC Truck Engine Bay Tank 2014-18 Chevrolet/GMC Truck Engine Bay Tank 2014-18 Chevrolet/GMC Truck Engine Bay Tank

    2014-18 Chevrolet/GMC Truck Engine Bay Tank

    2014-18 Chevrolet/GMC Truck 3 Gallon Engine Bay Tank   Dedicated Motorsports brings you a 3 gallon engine bay tank designed to fit in the secondary battery tray location. This tank is perfect for adding volume to your supercharger cooling system or...

    $399.99
  • 99-07 Chevrolet/GMC Truck Engine Bay Tank 99-07 Chevrolet/GMC Truck Engine Bay Tank 99-07 Chevrolet/GMC Truck Engine Bay Tank 99-07 Chevrolet/GMC Truck Engine Bay Tank 99-07 Chevrolet/GMC Truck Engine Bay Tank

    99-07 Chevrolet/GMC Truck Engine Bay Tank

    99-07 Classic Chevrolet/GMC Truck 2.6 Gallon Engine Bay Tank   Dedicated Motorsports brings you a 2.6 gallon engine bay tank designed to fit in the secondary battery tray location. This tank is perfect for adding volume to your supercharger cooling...

    $399.99
  • C7 Z06 LT4 2.30" Upper Pulley and Belt Combo

    C7 Z06 LT4 2.30" Upper Pulley and Belt Combo

    C7 Z06 LT4 2.30" Upper Pulley and Belt Combo   This Ultra Lightweight Pulley Upgrade for ZPE Pulley Hub system. (No machining of the snout needed) Fits factory GM LT4, this 10 Bolt Pulley is designed to be paired with our ZPE MK II HUB. The Pulley...

    $275.99
  • CTS-V and ZL1 LT4 2.30" Griptec Pulley and Belt Combo

    CTS-V and ZL1 LT4 2.30" Griptec Pulley and Belt Combo

    CTS-V and ZL1 LT4 2.30" Griptec Pulley and Belt Combo   Product DescriptionThis Ultra Lightweight Pulley Upgrade for ZPE Pulley Hub system. (No machining of the snout needed) Fits factory GM LT4, this 10 Bolt Pulley is designed to be paired with...

    $275.99
  • LT4 Pulley & Hub 2.30" Black Griptec V2 LT4 Pulley & Hub 2.30" Black Griptec V2 LT4 Pulley & Hub 2.30" Black Griptec V2

    LT4 Pulley & Hub 2.30" Black Griptec V2

    LT4 Pulley & Hub 2.30" Black Griptec V2   Product DescriptionThis Ultra Lightweight Pulley Upgrade for ZPE Pulley Hub system. (No machining of the snout needed) Fits factory GM LT4, this 10 Bolt Pulley is designed to be paired with our ZPE MK II...

    $228.00
  • LSA Pulley and MKII Hub LSA Pulley and MKII Hub

    LSA Pulley and MKII Hub

    LSA Pulley and MKII Hub   Ultra Lightweight Pulley and ZPE Pulley Hub system. Factory GM LSA/TVS, 10 Bolt Pulley W/ ZPE MK II HUB. The Pulley is made from billet 7075-T6 aerospace grade aluminum. Stronger and harder than 6061 T6. This pulley is...

    $218.00
  • DSX LT4/LT5 Upper Idler Bracket System DSX LT4/LT5 Upper Idler Bracket System

    DSX LT4/LT5 Upper Idler Bracket System

    DSX LT4/LT5 Upper Idler Bracket System   This is for the LT4/LT5 enthusiasts who have wanted extra upper pulley wrap. These brackets are unique to the Camaro/V3 application vs C7.Designed, programmed, and cut 100% under our own roof.The first photo...

    $200.00
  • DMS +5mm Relocation Bracket and 100mm Idler Pulley

    DMS +5mm Relocation Bracket and 100mm Idler Pulley

    DMS +5mm Relocation Bracket and 100mm Idler PulleyThe days of slipping belts is a thing of the past with the addition of the DMS belt wrap combo. This combo moves the belt +5mm closer to the upper pulley to aid in belt wrap for those running an...

    $159.99
  • Billet -12 ORB ZL1 Coolant Manifold Billet -12 ORB ZL1 Coolant Manifold Billet -12 ORB ZL1 Coolant Manifold Billet -12 ORB ZL1 Coolant Manifold Billet -12 ORB ZL1 Coolant Manifold

    Billet -12 ORB ZL1 Coolant Manifold

    Billet -12 ORB ZL1 Coolant Manifold   For years, the only method for converting the ZL1 inlet/outlet coolant ports to -12an was to machine and weld the factory cast aluminum piece. After proving this process on over 6000 OEM pieces we decided to...

    $149.99
  • DMS CTS-V -16AN High Flow Billet Water Manifold DMS CTS-V -16AN High Flow Billet Water Manifold DMS CTS-V -16AN High Flow Billet Water Manifold DMS CTS-V -16AN High Flow Billet Water Manifold DMS CTS-V -16AN High Flow Billet Water Manifold

    DMS CTS-V -16AN High Flow Billet Water Manifold

    DMS CTS-V -16AN High Flow Billet Water Manifold The DMS billet 16AN High Flow Billet Water Manifold is a direct replacement for the cast 5/ barb coolant manifold found on the CTS-V LSA supercharger lid. This manifold was designed for high flow systems...

    $149.99
  • LS9 ZR1 DMS Blower Blocks LS9 ZR1 DMS Blower Blocks

    LS9 ZR1 DMS Blower Blocks

    LS9 ZR1 DMS Blower Blocks   These billet coolant blocks are perfect for guys looking to upgrade the cooling system found on the 2009-2013 ZR1 Corvette with the LS9 supercharger. These blocks are cnc machined out of 6061 aluminum and anodized for...

    $149.99
  • DMS 9.20" C7Z LT4 for ATI Balancer 15% OD DMS 9.20" C7Z LT4 for ATI Balancer 15% OD DMS 9.20" C7Z LT4 for ATI Balancer 15% OD

    DMS 9.20" C7Z LT4 for ATI Balancer 15% OD

    DMS 9.20" C7Z LT4 for ATI Balancer The DMS 9.20" 8 rib balancer pulleys are a great way to increase supercharger RPM resulting in higher airflow and boost levels. These pulleys are CNC machined from 6061 aluminum and anodized for longevity. Designed to...

    $124.99
  • DMS 9.60" C7Z LT4 for ATI Balancer DMS 9.60" C7Z LT4 for ATI Balancer DMS 9.60" C7Z LT4 for ATI Balancer

    DMS 9.60" C7Z LT4 for ATI Balancer

    DMS 9.60" C7Z LT4 for ATI Balancer The DMS 9.60" 8 rib balancer pulleys are a great way to increase supercharger RPM resulting in higher airflow and boost levels. These pulleys are CNC machined from 6061 aluminum and anodized for longevity. Designed to...

    $124.99
  • ATI LPE Lower Overdrive Pulley All Sizes ATI LPE Lower Overdrive Pulley All Sizes

    ATI LPE Lower Overdrive Pulley All Sizes

    ATI LPE Lower Overdrive Pulley All Sizes Increase supercharger boost with these lower overdrive pulleys from ATI. These pulleys bolt to the ATI harmonic balancer part numbers 918854 and 918856. A idler relocation bracket is required for any pulley...

    $119.99 - $134.99
  • DMS 9.05" Lower Pulley for LSA/LT4 for ATI Balancer DMS 9.05" Lower Pulley for LSA/LT4 for ATI Balancer

    DMS 9.05" Lower Pulley for LSA/LT4 for ATI Balancer

    DMS 9.05" Lower Pulley for LSA/LT4 for ATI Balancer The DMS 9.05" 8 rib balancer pulleys are a great way to increase supercharger RPM resulting in higher airflow and boost levels. These pulleys are CNC machined from 6061 aluminum and anodized for...

    $119.99
  • DMS 9.60" Lower Pulley for LSA/LT4 for ATI Balancer

    DMS 9.60" Lower Pulley for LSA/LT4 for ATI Balancer

    DMS 9.60" Lower Pulley for LSA/LT4 for ATI Balancer The DMS 9.60" 8 rib balancer pulleys are a great way to increase supercharger RPM resulting in higher airflow and boost levels. These pulleys are CNC machined from 6061 aluminum and anodized for...

    $119.99
  • DMS 8.80" Lower Pulley for LSA/LT4 for ATI Balancer DMS 8.80" Lower Pulley for LSA/LT4 for ATI Balancer DMS 8.80" Lower Pulley for LSA/LT4 for ATI Balancer

    DMS 8.80" Lower Pulley for LSA/LT4 for ATI Balancer

    DMS 8.80" Lower Pulley for LSA/LT4 for ATI Balancer The DMS 8.80" 8 rib balancer pulleys are a great way to increase supercharger RPM resulting in higher airflow and boost levels. These pulleys are CNC machined from 6061 aluminum and anodized for...

    $114.99
  • DMS 9.20" Lower Pulley for LSA/LT4 for ATI Balancer

    DMS 9.20" Lower Pulley for LSA/LT4 for ATI Balancer

    DMS 9.20" Lower Pulley for LSA/LT4 for ATI Balancer The DMS 9.20" 8 rib balancer pulleys are a great way to increase supercharger RPM resulting in higher airflow and boost levels. These pulleys are CNC machined from 6061 aluminum and anodized for...

    $114.99
  • DMS Defrost Vent Dual Gauge Pod 52mm (2.065") DMS Defrost Vent Dual Gauge Pod 52mm (2.065") DMS Defrost Vent Dual Gauge Pod 52mm (2.065") DMS Defrost Vent Dual Gauge Pod 52mm (2.065") DMS Defrost Vent Dual Gauge Pod 52mm (2.065")

    DMS Defrost Vent Dual Gauge Pod 52mm (2.065")

    DMS Defrost Vent Dual Gauge Pod 52mm (2.065")   This gauge pod is built off the single platform and has a 2nd pod added at 45 degrees to give the user room for that added gauge with out having to sacrifice the clock. The depth of both pods are...

    $99.99
  • DMS CTS-V -12AN Billet Water Manifold DMS CTS-V -12AN Billet Water Manifold DMS CTS-V -12AN Billet Water Manifold DMS CTS-V -12AN Billet Water Manifold DMS CTS-V -12AN Billet Water Manifold

    DMS CTS-V -12AN Billet Water Manifold

    DMS CTS-V -12AN Billet Water Manifold     Dedicated Motorsports brings you our billet aluminum constructed -12an in/out manifold for your CTS-V Lid, made here in-house. This piece uses factory hardware and O-ring, and is quick and easy to...

    $90.00
  • 10 Rib 70mm Idler Pulley 10 Rib 70mm Idler Pulley

    10 Rib 70mm Idler Pulley

    10 Rib 70mm Idler Pulley   This pulley is used in the DMS 10 rib kit and can actually accept an 11 rib belt making it acceptable to run on the LS9 belt drive. However this product is designed to replace the factory lower idler on the LSA drive...

    $89.99
  • 10 Rib Tensioner Pulley 10 Rib Tensioner Pulley

    10 Rib Tensioner Pulley

    10 Rib Tensioner Pulley   LSA 10 Rib Grooved Tensioner Pulley and idler spacers. For use with 10 rib systems utilizing the CTS-V or ZL1 oem tensioner     Note: OEM bolt is left hand thread.    Due to the nature of these 10 rib...

    $89.99
  • DMS 50mm Supercharger Idler Pulley DMS 50mm Supercharger Idler Pulley DMS 50mm Supercharger Idler Pulley

    DMS 50mm Supercharger Idler Pulley

    DMS 50mm Supercharger Idler Pulley While the 50mm pulley is not the most ideal due to how tough the high RPM can be on bearings, there are times the 50mm is absolutely necessary. Commonly used to help achieve a certain belt length on the 09-13 ZR1...

    $89.99
  • DMS Wide LT4 Tensioner Pulley DMS Wide LT4 Tensioner Pulley DMS Wide LT4 Tensioner Pulley

    DMS Wide LT4 Tensioner Pulley

    DMS Wide LT4 Tensioner Pulley   Dedicated Motorsports brings you a solution to a not so well known issue. Chances are you may have experienced this issue if you've heard a squeaking/chirping noise from your LT4 supercharger belt or maybe you lost a...

    $89.99
  • DMS 100mm LSA LS9 Supercharger Idler Pulley

    DMS 100mm LSA LS9 Supercharger Idler Pulley

    DMS 100mm LSA LS9 Supercharger Idler Pulley When reducing the diameter of the upper pulley it is common to replace the factory 90mm idler with a 100m version to help increase belt wrap. These pulleys are made out of 6061 billet, anodized black and comes...

    $84.99
  • DMS 76mm LSA LS9 Supercharger Idler Pulley DMS 76mm LSA LS9 Supercharger Idler Pulley DMS 76mm LSA LS9 Supercharger Idler Pulley

    DMS 76mm LSA LS9 Supercharger Idler Pulley

    DMS 76mm LSA LS9 Supercharger Idler Pulley The DMS 76mm idler pulley is commonly used on the LS9 belt system to help establish the proper belt length/tension. These pulleys are made out of 6061 billet aluminum, anodized black and comes standard with a...

    $84.99
  • DMS LSA +5mm Idler Relocation Bracket

    DMS LSA +5mm Idler Relocation Bracket

    DMS LSA +5mm Idler Relocation Bracket This bracket is required when using a 9.17" or larger diameter lower crank pulley. The relo bracket is designed to move the factory lower idler to clear the larger crankshaft pulleys. DMS has taken it a step futher...

    $74.99
50 of 67 Items