null

Shop By Brand

400 of 419 Items
  • 2" Aluminum Donut Tight Radius

    2" Aluminum Donut Tight Radius

    2" Aluminum Donut Tight Radius   Description: The 2" Aluminum Donut is perfect for custom exhaust systems or fabrication for intake manifolds needed in tight bends and corners. This donut can be cut at any degree of bend needed. The donut is often...

    $32.99
    Add to Cart
  • LS 160 Degree Thermostat

    LS 160 Degree Thermostat

    LS 160 Degree Thermostat Enhance your engine's performance and longevity with the Lingenfelter 160 Degree Thermostat. This premium-quality thermostat is designed for a wide range of General Motors applications, offering a direct, drop-in replacement...

    $32.99
    Add to Cart
  • LSA/LT4 Snout Block Off Plates LSA/LT4 Snout Block Off Plates

    LSA/LT4 Snout Block Off Plates

    LSA/LT4 Snout Block Off Plates Clean up the front of your LSA or LT4 supercharger with these snout block off plates from Dedicated Motorsports. Each piece is machined from 6061 aluminum and anodized black. Countersink hardware and o-rings are included...

    $32.99
    Add to Cart
  • -12an 120 degree Pushlock Fitting (Black) Full Flow

    -12an 120 degree Pushlock Fitting (Black) Full Flow

    -12an 120 degree Pushlock Fitting (Black) Full Flow These -12an 120 degree hose ends are designed for applications where space in front of the fitting are tight but the system demands high flow. We call these full flow because they are forged and have a...

    $29.99
    Add to Cart
  • -12AN Low Profile 90° Swivel Hose End – Black (Full Flow) -12AN Low Profile 90° Swivel Hose End – Black (Full Flow) -12AN Low Profile 90° Swivel Hose End – Black (Full Flow) -12AN Low Profile 90° Swivel Hose End – Black (Full Flow)

    -12an Low Profile 90-degree Swivel Hose End (Black)

    -12AN Low Profile 90° Swivel Hose End – Black (Full Flow) Maximize flow in tight spaces with our -12AN Low Profile 90-Degree Swivel Hose End, finished in sleek black. Engineered for high-performance plumbing applications where space is limited,...

    $29.99
    Add to Cart
  • Gen V Cam Phaser Block Gen V Cam Phaser Block

    Gen V Cam Phaser Block

    Gen V Cam Phaser Limiter Block   When installing a camshaft on any Gen V engine it is incredibly important to make sure you install a cam phaser limiter block. Engine damage will occure if this step is missed. 

    $29.99
    Add to Cart
  • Nord-lock Suspension Locking Washers Nord-lock Suspension Locking Washers

    Nord-lock Suspension Locking Washers

    Nord-Lock Suspension Locking Washers – CTS-V Front Lower Control Arm Fix (Set of 4)Secure Your Suspension. Protect Your Subframe. A known weak point in the Cadillac CTS-V front suspension is the tendency for the lower control arm bolts to loosen...

    $29.99
    Add to Cart
  • -12an 90-degree Pushlock Fitting (Black) Full Flow -12an 90-degree Pushlock Fitting (Black) Full Flow

    -12an 90 degree Pushlock Fitting (Black) Full Flow

    -12an 90 degree Pushlock Fitting (Black) Full Flow These -12an 90 degree hose ends are designed for applications where space in front of the fitting are tight but the system demands high flow. We call these full flow because they are forged and have a...

    $28.99
    Add to Cart
  • -12an 45 degree Pushlock Fitting (Black) Full Flow

    -12an 45 degree Pushlock Fitting (Black) Full Flow

    -12an 45 degree Pushlock Fitting (Black) Full Flow These -12an 90 degree hose ends are designed for applications where space in front of the fitting are tight but the system demands high flow. We call these full flow because they are forged and have a...

    $26.99
    Add to Cart
  • 5/8 Inch Billet Tee Fitting 5/8 Inch Billet Tee Fitting

    5/8 Inch Billet Tee Fitting

    5/8 Inch Billet Tee Fitting The DMS 5/8 inch tee fittings is machined out of a solid piece of 6061 aluminum and anodized to prevent corrosion. These are a great way to tee off coolant lines on cooling systems with multiple intercoolers and are a more...

    $26.99
    Choose Options
  • DMS Catch Can Replacement Breather DMS Catch Can Replacement Breather DMS Catch Can Replacement Breather

    DMS Catch Can Replacement Breather

    DMS Catch Can Replacement Breather   This breather filter comes standard on all DMS billet round catch cans. If you've damaged or lost your breather you can replace it with one of these new ones.   

    $26.99
    Add to Cart
  • -12an Quick Connect Adapter GM LSA, LS9, LT4, LT5 -12an Quick Connect Adapter GM LSA, LS9, LT4, LT5

    -12an Quick Connect Adapter GM LSA, LS9, LT4, LT5

    -12an Quick Connect Adapter GM LSA, LS9, LT4, LT5 This fitting is designed to adapt the GM 5/8 Quick connect found on most GM supercharger coolant lines to a more common -12an male fitting. Allowing the use of a larger diameter hose and endless...

    $24.99
    Choose Options
  • Aluminum 1” Full Flow Hose Barb Flange Aluminum 1” Full Flow Hose Barb Flange Aluminum 1” Full Flow Hose Barb Flange

    Aluminum 1” Full Flow Hose Barb Flange

    Aluminum 1” Full Flow Hose Barb Flange This hose barb features a large radiused inlet making it perfect for feeding high flow pumps like the Stewart Warner EMP pump. Or anything needing a high flow inlet. Designed to sit flush against a .125”...

    $24.99
    Choose Options
  • LT4 Corvette Style Coolant Filler Adapter Tool LT4 Corvette Style Coolant Filler Adapter Tool LT4 Corvette Style Coolant Filler Adapter Tool LT4 Corvette Style Coolant Filler Adapter Tool

    LT4 Corvette Style Coolant Filler Adapter Tool

    LT4 Corvette Style Coolant Filler Adapter Tool   Lets face it, the coolant filling system found on the LT4 supercharged C7 Corvette can be a real pain in the butt to fill. Over the years we've tried a number of different solutions but none of them...

    $24.99
    Add to Cart
  • LT4 ZL1/CTS-V Style SC Coolant Filler Adapter Tool LT4 ZL1/CTS-V Style SC Coolant Filler Adapter Tool LT4 ZL1/CTS-V Style SC Coolant Filler Adapter Tool LT4 ZL1/CTS-V Style SC Coolant Filler Adapter Tool LT4 ZL1/CTS-V Style SC Coolant Filler Adapter Tool

    LT4 ZL1/CTS-V Style SC Coolant Filler Adapter Tool

    DMS LT4 Supercharger Coolant Filler Adapter Tool Simplify LT4 Coolant Refills with the DMS Adapter Tool Frustrated with the challenging coolant filling system on your LT4 supercharged vehicle? The DMS Coolant Filler Adapter Tool provides a simple and...

    $24.99
    Add to Cart
  • High Flow -16 ORB to 1” Hose Barb High Flow -16 ORB to 1” Hose Barb High Flow -16 ORB to 1” Hose Barb

    High Flow -16 ORB to 1” Hose Barb

    High Flow -16 ORB to 1” Hose Barb --------Sold individually--------   This fitting will adapt any -16ORB female fitting to a 1” hose barb. With a .965” inner diameter, these will outflow most AN fittings. On average, a standard...

    $22.99
    Add to Cart
  • DMS -16AN Straight Pushlock Fitting

    DMS -16AN Straight Pushlock Fitting

    DMS -16AN Straight Pushlock Fitting  We call these full flow because they are forged and have a constant inside diameter through the bend radius. Designed to be used with 1 Inch PUSHLOCK rubber hose (Non Braided).PRICE IS EACH

    $21.99
    Add to Cart
  • 1 Inch to .750 Inch High Flow Hose Joiner (union) 1 Inch to .750 Inch High Flow Hose Joiner (union) 1 Inch to .750 Inch High Flow Hose Joiner (union)

    1 Inch to .750 Inch High Flow Hose Joiner (union)

    1 Inch to .750 Inch High Flow Hose Joiner (union)   This hose joiner is a great way to mend any ¾ pushlock or heater hose lines. Typically used in supercharger cooling systems where high flow is a necessity these joiners feature a full ...

    $19.99
    Add to Cart
  • EFI 3/8 to 3/8 Quick Disconnect Coupler EFI 3/8 to 3/8 Quick Disconnect Coupler

    EFI 3/8 to 3/8 Quick Disconnect Coupler

    EFI 3/8 to 3/8 Quick Disconnect Coupler DMS brings you a fitting commonly needed, yet hard to find. This fitting is designed to connect a pair of 3/8" EFI hard lines together. Much like you would find on the end of a GM flex fuel sensor or Gm fuel rail...

    $19.99
    Add to Cart
  • High Flow -12 ORB to 3/4” Hose Barb High Flow -12 ORB to 3/4” Hose Barb High Flow -12 ORB to 3/4” Hose Barb

    High Flow -12 ORB to 3/4” Hose Barb

    High Flow -12 ORB to 3/4” Hose Barb --------Sold individually--------   This fitting will adapt any -12ORB female fitting to a 3/4” hose barb. With a .748” inner diameter, these will outflow most AN fittings.  These are CNC...

    $19.99
    Add to Cart
  • 180 Degree Swivel-Seal Female Aluminum Hose End

    180 Degree Swivel-Seal Female Aluminum Hose End

    180 Degree Swivel-Seal Female Aluminum Hose End RHP swivel seal AN hose ends are meticulously engineered.  We start with detailed CAD drawings and then cut each component from 6061 T6 Aluminum on our CNC machine turning centers providing superior...

    $20.69 - $34.82
    Choose Options
  • 3/4 Inch High Flow Hose Joiner (union) 3/4 Inch High Flow Hose Joiner (union) 3/4 Inch High Flow Hose Joiner (union)

    3/4 Inch High Flow Hose Joiner (union)

    3/4 Inch High Flow Hose Joiner (union)   This hose joiner is a great way to mend any ¾ pushlock or heater hose lines. Typically used in supercharger cooling systems where high flow is a necessity these joiners feature a full .750” inner...

    $18.99
    Add to Cart
  • 5/8 to 3/4 Inch High Flow Hose Joiner (Union)

    5/8 to 3/4 Inch High Flow Hose Joiner (Union)

    5/8 to 3/4 Inch High Flow Hose Joiner (Union) This hose joiner is a great way to step up any 5/8 hose to 3/4 pushlock or heater hose lines. Typically used in supercharger cooling systems where high flow is a necessity these joiners feature a full ...

    $18.99
    Add to Cart
  • DMS -12AN Straight Pushlock Fitting

    DMS -12AN Straight Pushlock Fitting

    DMS -12AN Straight Pushlock Fitting  We call these full flow because they are forged and have a constant inside diameter. Designed to be used with 3/4 Inch PUSHLOCK rubber hose (Non Braided).PRICE IS EACH

    $18.99
    Add to Cart
  • Aluminum Weld on 2 Bolt Mounting Flange Aluminum Weld on 2 Bolt Mounting Flange Aluminum Weld on 2 Bolt Mounting Flange

    Aluminum Weld on 2 Bolt Mounting Flange

    Aluminum Weld on 2 Bolt Mounting Flange   This flange is designed as a universal solution to mounting anything aluminum. Commonly used to weld onto intercoolers, heat exchangers, catch cans or ice tanks. It can be used in load bearing situations...

    $14.99
    Add to Cart
  • 120 Degree Swivel-Seal Female Aluminum Hose End

    120 Degree Swivel-Seal Female Aluminum Hose End

    120 Degree Swivel-Seal Female Aluminum Hose End   RHP swivel seal AN hose ends are meticulously engineered.  We start with detailed CAD drawings and then cut each component from 6061 T6 Aluminum on our CNC machine turning centers providing...

    $13.17 - $34.82
    Choose Options
  • 150 Degree Swivel-Seal Female Aluminum Hose End

    150 Degree Swivel-Seal Female Aluminum Hose End

    150 Degree Swivel-Seal Female Aluminum Hose End   RHP swivel seal AN hose ends are meticulously engineered.  We start with detailed CAD drawings and then cut each component from 6061 T6 Aluminum on our CNC machine turning centers providing...

    $13.17 - $34.82
    Choose Options
  • -16an ORB Aluminum Weld Bung -16an ORB Aluminum Weld Bung -16an ORB Aluminum Weld Bung

    -16an ORB Aluminum Weld Bung

    -16an ORB Aluminum Weld Bung   These are custom made low profile -16orb weld on bungs designed for fabricators who have an eye for quality. These are easy to weld and have a smooth radius on the o-ring seal to make for a tight seal without cutting...

    $12.99
    Add to Cart
  • LS water pump block off plates (pair)

    LS water pump block off plates (pair)

    LS water pump block off plates (pair)   These .125" thick aluminum block off plates are a great way to keep foreign objects out of your engine while it’s disassembled or in storage. They come standard in raw aluminum which could easily be...

    $12.99
    Add to Cart

  • LT Water Pump Block Off Plates (Pair)

    LT Water Pump Block Off Plates (Pair) These will fit all LT cylinder heads   These .125" thick aluminum block off plate is a great way to keep foreign objects out of your cylinder heads while it’s disassembled or in storage. They come standard...

    $12.99
    Add to Cart
  • 60 Degree Swivel-Seal Female Aluminum Hose End

    60 Degree Swivel-Seal Female Aluminum Hose End

    60 Degree Swivel-Seal Female Aluminum Hose End   RHP swivel seal AN hose ends are meticulously engineered.  We start with detailed CAD drawings and then cut each component from 6061 T6 Aluminum on our CNC machine turning centers providing...

    $12.21 - $34.82
    Choose Options
  • ARP LS1 Chevy Cam Bolt Kit

    ARP LS1 Chevy Cam Bolt Kit

    ARP LS1 Chevy Cam Bolt Kit End your camshaft timing worries! High-quality ARP cam bolts have increased preload clamping force to ensure positive timing gear register. Their increased material strength overcomes valvetrain harmonics and stress. These cam...

    $11.99
    Add to Cart
  • 45 Degree Swivel-Seal Female Aluminum Hose End

    45 Degree Swivel-Seal Female Aluminum Hose End

    45 Degree Swivel-Seal Female Aluminum Hose End   RHP swivel seal AN hose ends are meticulously engineered.  We start with detailed CAD drawings and then cut each component from 6061 T6 Aluminum on our CNC machine turning centers providing...

    $11.41 - $38.50
    Choose Options
  • 90 Degree Swivel-Seal Female Aluminum Hose End

    90 Degree Swivel-Seal Female Aluminum Hose End

    90 Degree Swivel-Seal Female Aluminum Hose End   RHP swivel seal AN hose ends are meticulously engineered.  We start with detailed CAD drawings and then cut each component from 6061 T6 Aluminum on our CNC machine turning centers providing...

    $11.62 - $41.80
    Choose Options
400 of 419 Items

© 2026 Dedicated Motorsports Solutions Powered by BigCommerce All rights reserved. | Sitemap