null

09-15 CTS-V

200 of 248 Items
  • DMS Lower LSA/LT4 Overdrive Pulley for ATI Balancers. Maximize the horsepower potential of your LSA or LT4 supercharger system with the DMS Lower Overdrive Pulley. Engineered to fit 918856 and 918854 ATI harmonic balancers, these pulleys offer a range of diameters to achieve your desired boost levels. DMS Lower LSA/LT4 Overdrive Pulley for ATI Balancers. Maximize the horsepower potential of your LSA or LT4 supercharger system with the DMS Lower Overdrive Pulley. Engineered to fit 918856 and 918854 ATI harmonic balancers, these pulleys offer a range of diameters to achieve your desired boost levels.

    DMS Lower LSA/LT4 Overdrive pulley for ATI balancers

    DMS Lower LSA/LT4 Overdrive Pulley for ATI Balancers Maximize the horsepower potential of your LSA or LT4 supercharger system with the DMS Lower Overdrive Pulley. Engineered to fit 918856 and 918854 ATI harmonic balancers, these pulleys offer a range of...

    $132.99 - $154.99
    Choose Options
  • High Amperage Coolant Pump Harness Upgrade

    High Amperage Coolant Pump Harness Upgrade

    High Amperage Coolant Pump Harness Upgrade   As the 09-15 CTS-V continues to age so does the electrical components. This issue is compounded with the addition of aftermarket high flow coolant pumps. This is because factory wiring harness is meant...

    $124.99
    Add to Cart
  • PNP EMP Pump Harness for Trunk Tank

    PNP EMP Pump Harness for Trunk Tank

    PNP EMP Pump Harness for Trunk Tank This plug and play harness is designed for the Stewart Warner EMP pump using a 4 pin DT connector. Since these pumps have a heavy amp draw we designed this harness with 10 gauge wire and a over sized fuse assembly. The...

    $124.99
    Add to Cart
  • ACDelco LS9 Plug Wire Set

    ACDelco LS9 Plug Wire Set

    ACDelco LS9 Plug wire set   Old part number: 19351570 New Part Number: 12731654   This wire set was originally found on the C6 ZR1 LS9 engine but will fit a number of different engines and is the choice wire set for many DMS builds...

    $119.99
    Add to Cart
  • GM Continental Flex Fuel Sensor

    GM Continental Flex Fuel Sensor

    GM Continental Flex Fuel Sensor   OEM Part Number 13577429 This is an OEM flex fuel sensor from GM. This sensor can be added to most GM vehicles with the proper associated wiring.

    $119.99
    Add to Cart
  • DMS 09-15 CTS-V Coupe Passenger Side EMP Pump Mount DMS 09-15 CTS-V Coupe Passenger Side EMP Pump Mount DMS 09-15 CTS-V Coupe Passenger Side EMP Pump Mount DMS 09-15 CTS-V Coupe Passenger Side EMP Pump Mount

    DMS 09-15 CTS-V Coupe Passenger Side EMP Pump Mount

    DMS 09-15 CTS-V Coupe Passenger Side EMP Pump Mount   Since the coupes have such a small trunk compartment, it can be challenging to mount an EMP pump and ice box in the same area. DMS designed this bracket to mount the EMP pump under the passenger...

    $99.99
    Add to Cart
  • DMS 50mm Supercharger Idler Pulley – High RPM Billet Design for LS9 & LSA Systems DMS 50mm Supercharger Idler Pulley – High RPM Billet Design for LS9 & LSA Systems DMS 50mm Supercharger Idler Pulley – High RPM Billet Design for LS9 & LSA Systems DMS 50mm Supercharger Idler Pulley

    DMS 50mm Supercharger Idler Pulley

    DMS 50mm Supercharger Idler Pulley – High RPM Billet Design for LS9 & LSA Systems Precision-engineered for high-performance supercharged setups While 50mm idler pulleys are often considered less ideal due to the stress high RPMs place on...

    $99.99
    Add to Cart
  • DMS Defrost Vent Dual Gauge Pod 52mm (2.065") DMS Defrost Vent Dual Gauge Pod 52mm (2.065") DMS Defrost Vent Dual Gauge Pod 52mm (2.065") DMS Defrost Vent Dual Gauge Pod 52mm (2.065") DMS Defrost Vent Dual Gauge Pod 52mm (2.065")

    DMS Defrost Vent Dual Gauge Pod 52mm (2.065")

    DMS Defrost Vent Dual Gauge Pod 52mm (2.065")   This gauge pod is built off the single platform and has a 2nd pod added at 45 degrees to give the user room for that added gauge with out having to sacrifice the clock. The depth of both pods are...

    $99.99
    Choose Options
  • 10 Rib 70mm Idler Pulley 10 Rib 70mm Idler Pulley

    10 Rib 70mm Idler Pulley

    10 Rib 70mm Idler Pulley   This pulley is used in the DMS 10 rib kit and can actually accept an 11 rib belt making it acceptable to run on the LS9 belt drive. However this product is designed to replace the factory lower idler on the LSA drive...

    $89.99
    Add to Cart
  • DMS 10-Rib Tensioner Pulley for LSA Engines DMS 10-Rib Tensioner Pulley for LSA Engines 10 Rib Tensioner Pulley

    10 Rib Tensioner Pulley

    DMS 10-Rib Tensioner Pulley for LSA Engines Upgrade your LSA 10-rib supercharger system with the DMS 10-Rib Grooved Tensioner Pulley and idler spacers. Designed for use with OEM CTS-V or ZL1 tensioners, this pulley ensures optimal belt tension and...

    $89.99
    Add to Cart
  • DMS 4.5" to 6" Billet Velocity Stack DMS 4.5" to 6" Billet Velocity Stack

    DMS 4.5" to 6" Billet Velocity Stack

    DMS 4.5" to 6" Billet Velocity Stack – CNC Machined Intake Transition Maximize airflow and performance with the DMS Billet Velocity Stack, designed to transition a 4.5” intake tube to a massive 6” air filter inlet with smooth,...

    $89.99
    Add to Cart
  • DMS CTS-V -12AN Billet Water Manifold DMS CTS-V -12AN Billet Water Manifold DMS CTS-V -12AN Billet Water Manifold DMS CTS-V -12AN Billet Water Manifold DMS CTS-V -12AN Billet Water Manifold

    DMS CTS-V -12AN Billet Water Manifold

    DMS CTS-V -12AN Billet Water Manifold     Dedicated Motorsports brings you our billet aluminum constructed -12an in/out manifold for your CTS-V Lid, made here in-house. This piece uses factory hardware and O-ring, and is quick and easy to...

    $89.99
    Choose Options
  • DMS LSA +5mm Idler Relocation Bracket Maximize Belt Wrap for High-Boost LSA Builds

    DMS LSA +5mm Idler Relocation Bracket

    DMS LSA +5mm Idler Relocation BracketMaximize Belt Wrap for High-Boost LSA Builds When running a larger 9.17" or greater diameter lower crank pulley on your LSA setup, clearance and belt wrap become critical. The Dedicated Motorsports Idler Relocation...

    $89.99
    Add to Cart
  • Genuine GM LS9 Head Gasket

    Genuine GM LS9 Head Gasket

    Genuine GM LS9 Head Gasket Price is each you will need 2   These are the gaskets we use on Turbocharged, Supercharged and Nitrous applications. The LS9 gaskets feature a 7-layer MLS construction that can used an anything up to a 4.100" Bore. These...

    $89.99
    Add to Cart
  • DMS 100mm LSA LS9 Supercharger Idler Pulley DMS 100mm LSA LS9 Supercharger Idler Pulley

    DMS 100mm LSA LS9 Supercharger Idler Pulley

    DMS 100mm LSA/LS9 Supercharger Idler Pulley Maximize belt wrap and ensure consistent boost with the DMS 100mm Supercharger Idler Pulley. Designed for LSA and LS9 supercharger systems, this pulley is a crucial upgrade when using smaller upper pulleys,...

    $84.99
    Add to Cart
  • DMS 76mm LSA LS9 Supercharger Idler Pulley DMS 76mm LSA LS9 Supercharger Idler Pulley DMS 76mm LSA LS9 Supercharger Idler Pulley DMS 76mm LSA LS9 Supercharger Idler Pulley

    DMS 76mm LSA LS9 Supercharger Idler Pulley

    DMS 76mm LSA LS9 Supercharger Idler Pulley The DMS 76mm idler pulley is commonly used on the LS9 belt system to help establish the proper belt length/tension. These pulleys are made out of 6061 billet aluminum, anodized black and comes standard with a...

    $84.99
    Add to Cart
  • NGK IRIDIUM SPARK PLUGS TR7IX SET OF (8)

    NGK IRIDIUM SPARK PLUGS TR7IX SET OF (8)

    NGK IRIDIUM SPARK PLUGS TR7IX SET OF (8) Weight: 0.10lbs Center Electrode Core Material: Copper Center Electrode Design: Fine Wire Center Electrode Tip Material: Iridium Drive Size: 5/8 in Electrical Terminal Type: Non-Removable Nut Gap - Factory...

    $79.99
    Add to Cart
  • GM Intake Air Temp Sensor

    GM Intake Air Temp Sensor

    GM Intake Air Temp Sensor   This intake air temp sensor is commonly found on the LSA and LS9 supercharger lids but is also frequently used on custom projects or swap vehicles. GM part number 12614717. We also offer an aluminum weld on bung threaded...

    $65.99
    Choose Options
  • GM 3-Bar MAP Sensor – LSA / LS9 (Blue Label – P/N 55567257)GM 3-Bar MAP Sensor – LSA / LS9 (Blue Label – P/N 55567257)

    GM 3 Bar Map Sensor LSA-LS9 (BLUE)

    GM 3-Bar MAP Sensor – LSA / LS9 (Blue Label – P/N 55567257) Upgrade your boosted build with the trusted GM 3-Bar MAP Sensor, the same sensor found on factory supercharged LSA and LS9 engines. Ideal for high-boost applications, this sensor is...

    $62.99
    Add to Cart
  • LSA Supercharger Intake Gaskets LSA Supercharger Intake Gaskets

    LSA Supercharger Intake Gaskets

    LSA Supercharger Intake Gaskets (Set of 2) OEM Replacement for a Perfect Seal Restore proper sealing performance on your LSA supercharger with these OEM-style intake gaskets. Designed to match factory specs, these gaskets ensure a reliable seal between...

    $62.99
    Add to Cart
  • DMS Auxiliary Fuel Pump Kit Optional Drill & Tap

    DMS Auxiliary Fuel Pump Kit Optional Drill & Tap

    DMS Auxiliary Fuel Pump Kit Optional Drill & Tap Need to purchase the correct drill and tap kit for the DSX Auxiliary Fuel Pump Kit for your ZL1, CTS-V, or C6/Z06 Corvette? Look no further! This kit is the only recommended kit that includes both the...

    $50.00
    Add to Cart
  • DMS Billet Center Cap for Weld Wheels 31mm Height DMS Billet Center Cap for Weld Wheels 31mm Height DMS Billet Center Cap for Weld Wheels 31mm Height DMS Billet Center Cap for Weld Wheels 31mm Height DMS Billet Center Cap for Weld Wheels 31mm Height

    DMS Billet Center Cap for Weld Wheels 31mm Height

    DMS Billet Center Cap for Weld Wheels 31mm Height Clean up the look look of your weld wheels with this new center cap option from Dedicated Motorsports. These caps are cnc machined from 6061 aluminum and anodized to match the weld wheel color. These caps...

    $49.99 - $59.99
    Choose Options
  • DMS Billet Center Cap for Weld Wheels 36mm Height DMS Billet Center Cap for Weld Wheels 36mm Height DMS Billet Center Cap for Weld Wheels 36mm Height DMS Billet Center Cap for Weld Wheels 36mm Height DMS Billet Center Cap for Weld Wheels 36mm Height

    DMS Billet Center Cap for Weld Wheels 36mm Height

    DMS Billet Center Cap for Weld Wheels 36mm Height Clean up the look look of your weld wheels with this new center cap option from Dedicated Motorsports. These caps are cnc machined from 6061 aluminum and anodized to match the weld wheel color (non faded)...

    $49.99 - $59.99
    Choose Options
  • DMS Defrost Vent Gauge Pod 52mm (2.065") DMS Defrost Vent Gauge Pod 52mm (2.065") DMS Defrost Vent Gauge Pod 52mm (2.065") DMS Defrost Vent Gauge Pod 52mm (2.065") DMS Defrost Vent Gauge Pod 52mm (2.065")

    DMS Defrost Vent Gauge Pod 52mm (2.065")

    DMS Defrost Vent Gauge Pod 52mm (2.065")   This gauge pod is designed to replace the drivers side defrost vent on all 2009-2015 Cadillac CTS-V's allowing for the install of most 52mm or 2-1/16 Inch gauges. These pods are 3D printed in house and...

    $49.99
    Choose Options
  • DMS Defrost Vent Gauge Pod 60mm (2.36") DMS Defrost Vent Gauge Pod 60mm (2.36") DMS Defrost Vent Gauge Pod 60mm (2.36") DMS Defrost Vent Gauge Pod 60mm (2.36") DMS Defrost Vent Gauge Pod 60mm (2.36")

    DMS Defrost Vent Gauge Pod 60mm (2.36")

    DMS Defrost Vent Gauge Pod 60mm (2.36")   This gauge pod is designed to replace the drivers side defrost vent on all 2009-2015 Cadillac CTS-V's allowing for the install of most 60mm or 2.36" Inch gauges. These pods are 3D printed in house and...

    $49.99
    Add to Cart
  • LSA Coolant Steam Port Push Lock Fitting 90 degree LSA Coolant Steam Port Push Lock Fitting 90 degree

    LSA Coolant Steam Port Push Lock Fitting 90 degree

    LSA Coolant Steam Port Push Lock Fitting 90 degree version   Its quite common to break these while working on the cooling system. We keep these new GM replacements in stock for this reason. Note: This is the 90 degree fitting found on the passenger...

    $46.99
    Add to Cart
  • LSA Coolant Steam Port Push Lock Fitting Straight LSA Coolant Steam Port Push Lock Fitting Straight

    LSA Coolant Steam Port Push Lock Fitting Straight

    LSA Coolant Steam Port Push Lock Fitting Straight version   Its quite common to break these while working on the cooling system. We keep these new GM replacements in stock for this reason. Note: This is the straight fitting found on the drivers side...

    $46.99
    Add to Cart
  • DMS Billet Y-Fitting 1.00*3/4*3/4 DMS Billet Y-Fitting 1.00*3/4*3/4 DMS Billet Y-Fitting 1.00*3/4*3/4

    DMS Billet Y-Fitting 1.00*3/4*3/4

    DMS Billet Y-Fitting – 1.00" x 3/4" x 3/4" Say goodbye to cracked plastic Y-fittings. The Dedicated Motorsports Billet Y-Fitting offers a high-strength, long-lasting solution for your cooling or fluid routing setup. Precision-machined from 6061...

    $44.99
    Choose Options
  • DMS Billet Y-Fitting 3/4*3/4*3/4 DMS Billet Y-Fitting 3/4*3/4*3/4 DMS Billet Y-Fitting 3/4*3/4*3/4

    DMS Billet Y-Fitting 3/4*3/4*3/4

    DMS Billet Y-Fitting 3/4*3/4*3/4   Tired of plastic fittings breaking after a couple month of use? Dedicated Motorsports has a solution for you. These billet 3/4 inch Y-fittings are made from billet 6061 aluminum and anodized black for...

    $44.99
    Choose Options
  • DMS Remote Mount GM 3 Bar Map Sensor DMS Remote Mount GM 3 Bar Map Sensor DMS Remote Mount GM 3 Bar Map Sensor

    DMS Remote Mount GM 3 Bar Map Sensor Mount

    DMS Remote Mount GM 3 Bar Map Sensor Mount   The DMS billet remote mount GM map sensor fitting is perfect for any engine with aftermarket intake manifolds lacking OEM map sensor provisions. The flange is designed for all Gen 4 or Gen 5 three wire...

    $42.99
    Choose Options
200 of 248 Items

© 2025 Dedicated Motorsports Solutions Powered by BigCommerce All rights reserved. | Sitemap