DMS "SW Special" Spec LT1/LT4 N/A and Supercharged Camshaft MSRP: Was: Now: $439.99 - $464.98 Choose Options
Injector Dynamics ID F750 Fuel Filter Bolt On Kit for the ZR1 Corvette MSRP: Was: Now: $399.99 Add to Cart
DMS Auxiliary Fuel Filter Kit for 2005-2013 C6 Corvette (Incl Z06) MSRP: Was: Now: $299.99 - $321.99 Choose Options
DSX Flex Fuel Kit for 2005-2013 C6 Corvette (including the Z06) MSRP: Was: Now: $299.99 Choose Options
Sale Black DMS Billet Thermostat Housing with LS3 Style 160 Degree Thermostat for all Gen V LT Engines MSRP: Was: $244.99 Now: $214.99 Add to Cart
Sale DMS Billet Thermostat Housing with 160 Degree Thermostat for all Gen V LT Engines MSRP: Was: $224.99 Now: $199.99 Add to Cart
CSF Heat Exchanger for C6 ZR1 Corvette Dedicated Motorsports Heat Exchanger C6 ZR1 Dedicated Motorsports has recently partnered with CSF, the cooling experts for over four decades, to create our highly engineered DMS C6 ZR1 Heat Exchanger. Countless hours of engineering and testing were put... MSRP: Was: Now: $449.99 Add to Cart
ECF-1: (FUEL) Ethanol Content & Air/Fuel Ratio Gauge W/O Sensor ECF-1: (FUEL) Ethanol Content & Air/Fuel Ratio Gauge Four-in-one, ethanol content percentage, fuel temperature, fuel pressure, and wideband air/fuel ratio gauge. This kit includes the GM Flex fuel sensor. *Does not include ethanol sensor MSRP: Was: Now: $449.99 Add to Cart
LSA/LS9 Plug and Play MSD 2-Step LSA/LS9 Plug and Play MSD 2-Step This is a MSD 2-Step launch control modified by us to be plug and play for LSA/LS9 applications. When you're staged, you can hold a button or the clutch pedal to the floor while the rpm stays at a consistent level... MSRP: Was: Now: $449.99 Add to Cart
Radium Engineering LSA/LS9 Fuel Rails Radium Engineering LSA/LS9 Fuel Rails These fuel rails are compatible with the following vehicles that use the General Motors LS9/LSA V8 engines: 2009-2013 Chevrolet Corvette ZR12012-2015 Chevrolet Camaro ZL12009-2015 Cadillac CTS-V2015-2017 HSV... MSRP: Was: Now: $449.99 Add to Cart
DMS "SW Special" Spec LT1/LT4 N/A and Supercharged Camshaft DMS "SW Special" LT4 PD Supercharged Camshaft In 2018 we set out to find the best matched camshaft for the LT4 supercharger. Our perfect cam would display great drivability, an excellent power curve, easy tuning and a nice choppy idle. That cam is the... MSRP: Was: Now: $439.99 - $464.98 Choose Options
Hp Tuners MVPI3 OBD-II tuning and logging interface Hp Tuners MVPI3 OBD-II tuning and logging interface The MPVI3 is the latest generation of hardware from HP Tuners. Equipped with enhanced features like Bluetooth®, a Proprietary Expansion Port, and Mobile Device Support, the powerful MPVI3... MSRP: Was: Now: $399.99 Choose Options
Injector Dynamics ID F750 Fuel Filter Bolt On Kit for the ZR1 Corvette Injector Dynamics ID F750 Fuel Filter Bolt On Kit for the ZR1 Corvette The Next Step in FiltrationThe ID F750 is the first performance filter designed to meet strict OE filter requirements, namely Bosch’s specification for electronic fuel... MSRP: Was: Now: $399.99 Add to Cart
LS9 Griptec 2.35" Upper, 76mm Idler and Belt Combo LS9 Griptec 2.35" Upper, 76mm Idler and Belt Combo This is a common combo used on the C6 ZR1 when paired with a ATI 14% overdrive lower balancer. This kit includes a 2.35" Griptec pulley with MKII hub and Titainum bolts, DMS 76mm idler pulley and... MSRP: Was: Now: $369.99 Add to Cart
BTR GEN V LT4 PLATINUM DUAL SPRING KIT - .660" LIFT - SK008 BTR GEN V LT4 PLATINUM DUAL SPRING KIT - .660" LIFT - SK008 The BTR Platinum Spring Kit would be inducted into the LS Aftermarket Hall of Fame if such a thing existed. Whether you’re putting together a daily driver with a mild cam, a 600 hp... MSRP: Was: Now: $309.99 Add to Cart
Injector Dynamics ID F750 Fuel Filter Injector Dynamics ID F750 Fuel Filter The Next Step in FiltrationThe ID F750 is the first performance filter designed to meet strict OE filter requirements, namely Bosch’s specification for electronic fuel injectors. It is the result of... MSRP: Was: Now: $300.00 Choose Options
DMS Auxiliary Fuel Filter Kit for 2005-2013 C6 Corvette (Incl Z06) DMS Auxiliary Fuel Filter Kit for 2005-2013 C6 Corvette (Incl Z06) One of the most important (and often overlooked) aspects of aftermarket fuel systems is post-pump filtration. In the case of the 2006-2013 C6 Corvette (Incl Z06), this aspect of... MSRP: Was: Now: $299.99 - $321.99 Choose Options
DMS Auxiliary Fuel Filter Kit for 2009-2013 Corvette ZR1 DMS Auxiliary Fuel Filter Kit for 2009-2013 Corvette ZR1 One of the most important (and often overlooked) aspects of aftermarket fuel systems is post-pump filtration. In the case of the 2009-2013 Corvette ZR1, this aspect of filtration was... MSRP: Was: Now: $299.99 Add to Cart
DSX Flex Fuel Kit for 2005-2013 C6 Corvette (including the Z06) DSX Flex Fuel Kit for 2005-2013 C6 Corvette (including the Z06) The DSX Flex Fuel Kit offers a true Plug & Play solution which will allow you to convert your 2005-2013 Corvette (including the Z06) to use E85 / ethanol based fuels (any blend... MSRP: Was: Now: $299.99 Choose Options
DSX Flex Fuel Kit for 2009-2013 C6 Corvette ZR1 DSX Flex Fuel Kit for 2009-2013 C6 Corvette ZR1 The DSX Flex Fuel Kit offers a true Plug & Play solution which will allow you to convert your 2009-2013 C6 Corvette ZR1 to use E85 / ethanol based fuels (any blend from 0% to 100%) and unlock the... MSRP: Was: Now: $299.99 Add to Cart
DSX Flex Fuel Kit for 2014+ C7 Corvette Stingray DSX Flex Fuel Kit for 2014+ C7 Corvette Stingray The DSX Flex Fuel Kit offers a true Plug & Play solution which will allow you to convert your 2014+ C7 Corvette Stingray to use E85 / ethanol based fuels (any blend from 0% to 100%) and unlock the... MSRP: Was: Now: $299.99 Add to Cart
DSX Flex Fuel Kit for 2014+ C7 Corvette Z06 DSX Flex Fuel Kit for 2014+ C7 Corvette Z06 The DSX Flex Fuel Kit offers a true Plug & Play solution which will allow you to convert your 2014+ C7 Corvette Z06 to use E85 / ethanol based fuels (any blend from 0% to 100%) and unlock the ability... MSRP: Was: Now: $299.99 Add to Cart
Hp Tuners RTD/ MVPI3 Tuner Flash and Logging Device Hp Tuners RTD/ MVPI3 Tuner Flash and Logging Device This device is designed to be used for flashing tunes provided by Dedicated Motorsports as well as logging vehicle information to send in for review. We're offering this product mostly for anyone... MSRP: Was: Now: $299.99 Choose Options
Banks iDash OBD-2 gauge 52mm Banks iDash OBD-2 gauge 52mm #1 Performance Monitor to measure your horsepower, acceleration, diagnostic codes, and more. iDash is the world's most powerful compact digital gauge. Display and log hundreds of parameters. OBD-II plug-and-play. 5... MSRP: Was: Now: $294.99 Add to Cart
C7 Z06 LT4 2.30" Upper Pulley and Belt Combo C7 Z06 LT4 2.30" Upper Pulley and Belt Combo This Ultra Lightweight Pulley Upgrade for ZPE Pulley Hub system. (No machining of the snout needed) Fits factory GM LT4, this 10 Bolt Pulley is designed to be paired with our ZPE MK II HUB. The Pulley... MSRP: Was: Now: $275.99 Add to Cart
AEM X-Series OBDII Wideband 30-0334 AEM X-Series OBDII Wideband 30-0334 AEM's X-Series OBDII Wideband UEGO AFR Sensor Controller Gauge (PN 30-0333) provides tuners who are using piggyback tuning modules or open source software with the ability to view AFR through the factory CAN-bus... MSRP: Was: Now: $269.99 Add to Cart
Fore Innovations LS3 Fuel Rails (LS2, L99, L76, LSXr) Fore Innovations LS3 Fuel Rails (LS2, L99, L76, LSXr) DescriptionFore Innovations billet fuel rails for the LS2, LS3, L76, L99 motors, as well as Fast LSXr 102mm intakes for LS1, LS2, LS3, LS6, LS7, L99, L76. Machined from a solid block of 6061... MSRP: Was: Now: $245.00 Add to Cart
Fore Innovations LS7 Fuel Rails Fore Innovations LS7 Fuel Rails DescriptionFore Innovations billet fuel rails for the LS7. Machined from a solid block of 6061 aluminum. Integrated mounting tabs eliminate rail tab flex under the highest intake and fuel pressures. Proper clearances and... MSRP: Was: Now: $245.00 Add to Cart
LT4 Pulley & Hub 2.30" Black Griptec V2 LT4 Pulley & Hub 2.30" Black Griptec V2 Product DescriptionThis Ultra Lightweight Pulley Upgrade for ZPE Pulley Hub system. (No machining of the snout needed) Fits factory GM LT4, this 10 Bolt Pulley is designed to be paired with our ZPE MK II... MSRP: Was: Now: $228.00 Add to Cart
DB-Blue Gauge / LC-2 Kit DB-Blue Gauge / LC-2 Kit This kit comes complete with the patented award-winning LC-2 Wideband Controller, DB-Blue Gauge, Bosch LSU 4.9 Wideband O2 Sensor, 8ft Sensor Cable, Bung, Serial Cable, and Manual. MSRP: Was: Now: $219.00 Add to Cart
Sale Black DMS Billet Thermostat Housing with LS3 Style 160 Degree Thermostat for all Gen V LT Engines BLACK Anodized DMS Billet Thermostat Housing with LS3 Style 160 Degree Thermostat for All Gen V LT Engines Dedicated Motorsports brings you a bolt on replacement for the OEM plastic thermostat housing found on all Gen V LT motors. This plastic... MSRP: Was: $244.99 Now: $214.99 Add to Cart
Hawk Performance Brake Pads Front Hawk Performance Brake Pads Front High Performance Street 5.0 Brake Pads; w/ 0.770 ThicknessFor years, engine builders have been pushing motors to the limits of their ability, and at Hawk Performance, we're closer than ever to pushing the ABS Rev Limiter... MSRP: Was: Now: $213.89 Add to Cart
DSX LT4/LT5 Upper Idler Bracket System DSX LT4/LT5 Upper Idler Bracket System This is for the LT4/LT5 enthusiasts who have wanted extra upper pulley wrap. These brackets are unique to the Camaro/V3 application vs C7.Designed, programmed, and cut 100% under our own roof.The first photo... MSRP: Was: Now: $200.00 Choose Options
Sale DMS Billet Thermostat Housing with 160 Degree Thermostat for all Gen V LT Engines DMS Billet Thermostat Housing with LS3 Style 160 Degree Thermostat for All Gen V LT Engines Dedicated Motorsports brings you a bolt on replacement for the OEM plastic thermostat housing found on all Gen V LT motors. This plastic housing is prone to... MSRP: Was: $224.99 Now: $199.99 Add to Cart
Fuelab 6 Micron Microfiberglass 5" Fuel Filter (E85) Fuelab 6 Micron Microfiberglass 5" Fuel Filter (E85) Choice of -6AN, -8AN, -10AN or -12AN inlet/outlet Fuelab filter with long (5 inch) 6 micron / Micro-Fiberglass Element - Our most advanced filter element provides extra particle protection and... MSRP: Was: Now: $192.99 Choose Options
DMS -10an High Flow Billet Catch Can DMS -10an High Flow Billet Catch Can The DMS catch can is engineered to utilize air velocity developed by crankcase pressure to aid in separating oil droplets from this crankcase air. As the air/oil mixture enters the DMS can its forced into a circular... MSRP: Was: Now: $179.99 Choose Options
Fuelab 6 Micron Microfiberglass 3" Fuel Filter (E85) Fuelab 6 Micron Microfiberglass 3" Fuel Filter (E85) Choice of -6AN, -8AN, -10AN or -12AN inlet/outlet Fuelab filter with long (3 inch) 6 micron / Micro-Fiberglass Element - Our most advanced filter element provides extra particle protection and... MSRP: Was: Now: $169.99 Choose Options
ARP Gen 4 Head Bolt Kit ARP Gen 4 Head Bolt Kit Head Bolt Kit:Chevrolet Small Block, 2004 & later, with all same length bolts, hexKit #: 134-3610Kit Instructions MSRP: Was: Now: $161.01 Add to Cart
Z-Industries Griptec MKII Pulley- NO HUB Z-Industries Griptec MKII Pulley NO HUB This is a replacment 2.30" Griptec Pulley for the LT4 Supercharger. No hub or bolts included. MSRP: Was: Now: $159.99 Choose Options
Hawk Performance Brake Pads Rear Hawk Performance Brake Pads Rear High Performance Street 5.0 Brake Pads; w/ 0.770 ThicknessFor years, engine builders have been pushing motors to the limits of their ability, and at Hawk Performance, we're closer than ever to pushing the ABS Rev Limiter... MSRP: Was: Now: $157.75 Add to Cart
LS9 ZR1 DMS Blower Blocks LS9 ZR1 DMS Blower Blocks These billet coolant blocks are perfect for guys looking to upgrade the cooling system found on the 2009-2013 ZR1 Corvette with the LS9 supercharger. These blocks are cnc machined out of 6061 aluminum and anodized for... MSRP: Was: Now: $149.99 Choose Options
DMS 9.60" C7Z LT4 for ATI Balancer DMS 9.60" C7Z LT4 for ATI Balancer The DMS 9.60" 8 rib balancer pulleys are a great way to increase supercharger RPM resulting in higher airflow and boost levels. These pulleys are CNC machined from 6061 aluminum and anodized for longevity. Designed to... MSRP: Was: Now: $144.99 Add to Cart
DMS 9.20" C7Z LT4 for ATI Balancer 15% OD DMS 9.20" C7Z LT4 for ATI Balancer The DMS 9.20" 8 rib balancer pulleys are a great way to increase supercharger RPM resulting in higher airflow and boost levels. These pulleys are CNC machined from 6061 aluminum and anodized for longevity. Designed to... MSRP: Was: Now: $141.99 Add to Cart
LT4 High Pressure Rail Crossover Fuel Line LT4 High Pressure Rail Crossover Fuel Line These fuel lines are a one time use and need to be replaced each time they're removed. Both part numbers 12647277 and 12677005 MSRP: Was: Now: $109.99 Add to Cart
IAT / Baro Breakout Harness for Gen V DSX IAT/BARO Breakout Harness The DSX IAT/baro Breakout harness allows you to remove the IAT from the MAF assembly on newer vehicles so you can place it closer to the throttle for applications using methanol injection to meet fueling requirements. It... MSRP: Was: Now: $220.00 Choose Options
Trick Flow Flywheel Holding Tools for GM LS Trick Flow Flywheel Holding Tools for GM LS DescriptionTorque your harmonic balancer bolt on your LS engine with ease using Trick Flow® flywheel holding tools for GM LS. These specially made tools will hold your crankshaft in place while you... MSRP: Was: Now: $99.97 Add to Cart
10 Rib 70mm Idler Pulley 10 Rib 70mm Idler Pulley This pulley is used in the DMS 10 rib kit and can actually accept an 11 rib belt making it acceptable to run on the LS9 belt drive. However this product is designed to replace the factory lower idler on the LSA drive... MSRP: Was: Now: $89.99 Add to Cart
DMS 50mm Supercharger Idler Pulley DMS 50mm Supercharger Idler Pulley While the 50mm pulley is not the most ideal due to how tough the high RPM can be on bearings, there are times the 50mm is absolutely necessary. Commonly used to help achieve a certain belt length on the 09-13 ZR1... MSRP: Was: Now: $89.99 Add to Cart
DMS Wide LT4 Tensioner Pulley DMS Wide LT4 Tensioner Pulley Dedicated Motorsports brings you a solution to a not so well known issue. Chances are you may have experienced this issue if you've heard a squeaking/chirping noise from your LT4 supercharger belt or maybe you lost a... MSRP: Was: Now: $89.99 Add to Cart
DMS 100mm LSA LS9 Supercharger Idler Pulley DMS 100mm LSA LS9 Supercharger Idler Pulley When reducing the diameter of the upper pulley it is common to replace the factory 90mm idler with a 100m version to help increase belt wrap. These pulleys are made out of 6061 billet, anodized black and comes... MSRP: Was: Now: $84.99 Add to Cart
DMS 76mm LSA LS9 Supercharger Idler Pulley DMS 76mm LSA LS9 Supercharger Idler Pulley The DMS 76mm idler pulley is commonly used on the LS9 belt system to help establish the proper belt length/tension. These pulleys are made out of 6061 billet aluminum, anodized black and comes standard with a... MSRP: Was: Now: $84.99 Add to Cart
ACDelco LS9 Plug Wire Set ACDelco LS9 Plug wire set This wire set was originally found on the C6 ZR1 LS9 engine but will fit a number of different engines and is the choice wire set for many DMS builds. (Price is for a set of 8 wires, no metal shields included) MSRP: Was: Now: $81.99 Add to Cart
6" Screened Velocity Stack for cold air intake systems or turbos 6" Screened Velocity Stack for cold air intake systems or turbos This screen is a great way to make 20-60hp on your supercharged setup during race time. Its common for most intake systems to come with a fairly restrictive air filter element. The... MSRP: Was: Now: $79.99 Add to Cart
LT4 High Pressure Intermediate Fuel Line LT4 High Pressure Intermediate Fuel Line These fuel lines are a one time use and need to be replaced each time they're removed. Both part numbers 12647277 and 12677005 MSRP: Was: Now: $79.99 Add to Cart
NGK IRIDIUM SPARK PLUGS LTR7IX-11 SET OF (8) NGK IRIDIUM SPARK PLUGS LTR7IX-11 SET OF (8) Weight: 0.14lbs Center Electrode Core Material: Copper Center Electrode Design: Fine Wire Center Electrode Tip Material: Iridium Drive Size: 5/8 in Electrical Terminal... MSRP: Was: Now: $79.99 Add to Cart
Baro Breakout Harness for Gen V DSX BARO Breakout Harness for Gen V The DSX Baro Breakout Harness breaks out the barometric pressure sensor, which allows the calibrator to restore proper calculations in the ECM for pressure ratio on boosted applications. The 3 bar MAP sensor is not... MSRP: Was: Now: $69.99 Choose Options