DMS 10.0" 10 Rib Lower LSA/LT4 Overdrive Pulley for ATI Balancers MSRP: Was: Now: $154.99 Choose Options
99-07 Chevrolet/GMC Truck & Suv Trans Cooler/ Heat Exchanger Bracket MSRP: Was: Now: $150.00 Choose Options
DMS 9.60" Overdrive Pulley for ATI Balancer C7 Z06 Corvette (dry sump) MSRP: Was: Now: $144.99 Add to Cart
DMS 9.20" Overdrive Pulley for ATI Balancer C7 Z06 Corvette (dry sump) MSRP: Was: Now: $141.99 Add to Cart
Sale ZPE Griptec LS9 3.10" 11 rib pulley and MKII Hub (stock size) MSRP: Was: $249.99 Now: $139.99 Add to Cart
Sale DSX Tuning LT4 9.45" Lower Pulley (dry sump C7Z) "Open box" MSRP: Was: $160.00 Now: $114.99 Add to Cart
Sale DSX Tuning LSA/LT4 9.45" Lower Pulley (wet sump) "Open box" MSRP: Was: $145.00 Now: $94.99 Add to Cart
Sale DSX Tuning LSA/LT4 9.06" Lower Pulley (wet sump) "Open box" MSRP: Was: $140.00 Now: $89.99 Add to Cart
Lingenfelter Supercharger Solid Isolator Coupling LS9 LSA Engine 2009-2014 MSRP: Was: Now: $79.99 Add to Cart
Pierburg CWA400 Trunk Tank Harness with fuse and relay Pierburg CWA400 Trunk Tank Harness with Fuse & RelayPower your CWA400 water pump reliably and safely with Dedicated Motorsports' premium trunk tank harness. This high-performance wiring harness is specifically designed to run the Pierburg CWA400... MSRP: Was: Now: $169.99 Choose Options
LT4 Supercharger Griptec MKII Pulley- NO HUB LT4 Supercharger Griptec MKII Pulley- NO HUB This is a replacement 2.30" Griptec Pulley for the LT4 Supercharger. No hub or bolts included. MSRP: Was: Now: $166.99 Choose Options
ZPE MKII LSA Pulley Only ZPE MKII LSA 10 Bolt Pulley Only Ultra Lightweight Pulley. Factory GM LSA/TVS, 10 Bolt Pulley. The Pulley is made from billet 7075-T6 aerospace grade aluminum. Stronger and harder than 6061 T6. This pulley is equipped with GripTec® a micro... MSRP: Was: Now: $166.99 Choose Options
LSA Serpentine Drive Tensioner (6 Rib) LSA Serpentine Drive Tensioner (6 Rib) OEM Part Number: 12628025 This is the OEM serpentine belt drive tensioner found on all 09-15 CTS-V and 2012-2015 ZL1 Camaros with the LSA engine. It's a part often overlooked when collecting all the proper... MSRP: Was: Now: $164.99 Add to Cart
DMS +5mm Relocation Bracket and 100mm Idler Pulley DMS +5mm Relocation Bracket and 100mm Idler Pulley Combo Eliminate belt slippage and optimize belt wrap with the DMS +5mm Relocation Bracket and 100mm Idler Pulley Combo. This kit is specifically designed for high-performance supercharger setups,... MSRP: Was: Now: $159.99 Add to Cart
Eibach C6/C7 Corvette Lower Bolts Eibach C6/C7 Corvette Lower Bolts Drop of 0-2.5" Kit consists of height adjustment bolts and urethane pads (not a spring kit). Does not fit Z07 package. MSRP: Was: Now: $159.99 Add to Cart
DMS 10.0" 10 Rib Lower LSA/LT4 Overdrive Pulley for ATI Balancers DMS 10.0" 10 Rib Lower LSA/LT4 Overdrive Pulley for ATI Balancers While this is a 10 rib pulley, it can absolutely be used with a 8 rib setup. Just use the 8 ribs closest to the engine. No negative side effects to worry about. Maximize the... MSRP: Was: Now: $154.99 Choose Options
99-07 Chevrolet/GMC Truck & Suv Trans Cooler/ Heat Exchanger Bracket 99–07 Chevrolet/GMC Truck & SUV Transmission Cooler & Heat Exchanger Mounting Bracket Looking to upgrade your 1999–2007 GM full-size truck or SUV with a transmission cooler or heat exchanger? This custom bracket is your bolt-on... MSRP: Was: Now: $150.00 Choose Options
aFe CONTROL Ride Height Simulators aFe CONTROL Ride Height Simulators aFe CONTROL Ride Height Simulator modules are a simple plug and play connector that allows installation of aftermarket lowering or lift kits that change vehicle ride height more than 1”. These work in... MSRP: Was: Now: $149.99 Add to Cart
Billet -12 ORB ZL1 Coolant Manifold DMS Billet -12 ORB ZL1 Coolant Manifold Upgrade your ZL1's cooling system with the DMS Billet -12 ORB Coolant Manifold. This precision-engineered manifold provides a superior solution for converting ZL1 inlet/outlet coolant ports to -12AN connections,... MSRP: Was: Now: $149.99 Choose Options
LS9 ZR1 DMS Blower Blocks LS9 ZR1 DMS Blower Blocks These billet coolant blocks are perfect for guys looking to upgrade the cooling system found on the 2009-2013 ZR1 Corvette with the LS9 supercharger. These blocks are cnc machined out of 6061 aluminum and anodized for... MSRP: Was: Now: $149.99 Choose Options
DMS 9.60" Lower LSA/LT4 Overdrive Pulley for ATI Balancers DMS 9.60" Lower LSA/LT4 Overdrive Pulley for ATI Balancers Maximize the horsepower potential of your LSA or LT4 supercharger system with the DMS Lower Overdrive Pulley. Engineered to fit 918856 and 918854 ATI harmonic balancers, these pulleys offer a... MSRP: Was: Now: $146.99 Add to Cart
DMS 9.60" Overdrive Pulley for ATI Balancer C7 Z06 Corvette (dry sump) DMS 9.60" Overdrive Pulley for ATI Balancer C7 Z06 Corvette (dry sump) The DMS 9.60" 8 rib balancer pulleys are a great way to increase supercharger RPM resulting in higher airflow and boost levels. These pulleys are CNC machined from 6061 aluminum and... MSRP: Was: Now: $144.99 Add to Cart
DMS 9.20" Lower LSA/LT4 Overdrive Pulley for ATI Balancers DMS 9.20" Lower LSA/LT4 Overdrive Pulley for ATI Balancers Maximize the horsepower potential of your LSA or LT4 supercharger system with the DMS Lower Overdrive Pulley. Engineered to fit 918856 and 918854 ATI harmonic balancers, these pulleys offer a... MSRP: Was: Now: $142.99 Add to Cart
DMS 9.20" Overdrive Pulley for ATI Balancer C7 Z06 Corvette (dry sump) DMS 9.20" Overdrive Pulley for ATI Balancer C7 Z06 Corvette (dry sump) The DMS 9.20" 8 rib balancer pulleys are a great way to increase supercharger RPM resulting in higher airflow and boost levels. These pulleys are CNC machined from 6061 aluminum and... MSRP: Was: Now: $141.99 Add to Cart
OEM LSA Supercharger Tensioner Bracket OEM LSA Supercharger Tensioner Bracket Part Number: 12606500 This is an OEM supercharger tensioner bracket found on all LSA supercharger belt drive systems. MSRP: Was: Now: $139.99 Choose Options
Sale ZPE Griptec LS9 3.10" 11 rib pulley and MKII Hub (stock size) ZPE Griptec LS9 3.10" 11 rib pulley and MKII Hub (stock size) This is a great way to run a stock sized upper pulley with the benefit of the Griptec texture. MSRP: Was: $249.99 Now: $139.99 Add to Cart
DMS 9.05" Lower LSA/LT4 Overdrive Pulley for ATI Balancers DMS 9.05" Lower LSA/LT4 Overdrive Pulley for ATI Balancers Maximize the horsepower potential of your LSA or LT4 supercharger system with the DMS Lower Overdrive Pulley. Engineered to fit 918856 and 918854 ATI harmonic balancers, these pulleys offer a... MSRP: Was: Now: $134.99 Add to Cart
DMS 8.80" Lower LSA/LT4 Overdrive Pulley for ATI Balancers DMS 8.80" Lower LSA/LT4 Overdrive Pulley for ATI Balancers Maximize the horsepower potential of your LSA or LT4 supercharger system with the DMS Lower Overdrive Pulley. Engineered to fit 918856 and 918854 ATI harmonic balancers, these pulleys... MSRP: Was: Now: $132.99 Add to Cart
ACDelco LT4 Supercharger Belt Tensioner ACDelco LT4 Supercharger Belt Tensioner Part Number: 12663624 MSRP: Was: Now: $129.99 Add to Cart
2 Inch Lift/Jack Pucks (Set of 4) 2 Inch Lift/Jack Pucks (Set of 4) These billet aluminum jack pucks will save your side skirts when lifting your car with a 4 post lift or a floor jack. They have a t-post that fits in the factory body slots and provides a solid lifting point... MSRP: Was: Now: $124.99 Add to Cart
PNP EMP Pump Harness for Trunk Tank PNP EMP Pump Harness for Trunk Tank This plug and play harness is designed for the Stewart Warner EMP pump using a 4 pin DT connector. Since these pumps have a heavy amp draw we designed this harness with 10 gauge wire and a over sized fuse assembly. The... MSRP: Was: Now: $124.99 Add to Cart
ACDelco LS9 Plug Wire Set ACDelco LS9 Plug wire set Old part number: 19351570 New Part Number: 12731654 This wire set was originally found on the C6 ZR1 LS9 engine but will fit a number of different engines and is the choice wire set for many DMS builds... MSRP: Was: Now: $119.99 Add to Cart
GM Continental Flex Fuel Sensor GM Continental Flex Fuel Sensor OEM Part Number 13577429 This is an OEM flex fuel sensor from GM. This sensor can be added to most GM vehicles with the proper associated wiring. MSRP: Was: Now: $119.99 Add to Cart
Sale DSX Tuning LT4 9.45" Lower Pulley (dry sump C7Z) "Open box" DSX Tuning LT4 9.45" Lower Pulley (dry sump C7Z) " Open Box" This is an open box item but otherwise its brand new These lower pulleys are compatible with ATI part number 917315 for the C7 LT4 damper. They are machined from 6061 aluminum and... MSRP: Was: $160.00 Now: $114.99 Add to Cart
LT4 High Pressure Rail Crossover Fuel Line LT4 High Pressure Rail Crossover Fuel Line These fuel lines are a one time use and need to be replaced each time they're removed. Both part numbers 12647277 and 12677005 MSRP: Was: Now: $109.99 Add to Cart
Trick Flow Flywheel Holding Tools for GM LS/LT Engines Trick Flow Flywheel Holding Tools for GM LS/LT Engines DescriptionTorque your harmonic balancer bolt on your LS engine with ease using Trick Flow® flywheel holding tools for GM LS/LT Engines. These specially made tools will hold your... MSRP: Was: Now: $109.99 Add to Cart
IAT / Baro Breakout Harness for Gen V DSX IAT/BARO Breakout Harness The DSX IAT/baro Breakout harness allows you to remove the IAT from the MAF assembly on newer vehicles so you can place it closer to the throttle for applications using methanol injection to meet fueling requirements. It... MSRP: Was: Now: $205.00 Choose Options
ACDelco LT5 Grooved 11 Rib Supercharger Idler Pulley ACDelco LT5 Grooved 11 Rib Supercharger Idler Pulley Part Number: 12665034 This 11 rib idler pulley is found on the drivers side tensioner bracket of the LT5 engine and is a part of the supercharger belt system. MSRP: Was: Now: $99.99 Add to Cart
ACDelco LT5 Grooved 11 Rib Supercharger Idler Pulley water pump ACDelco LT5 Grooved 11 Rib Supercharger Idler Pulley Part Number: 12665033 This 11 rib idler pulley is found on the water pump of the LT5 engine and is a part of the supercharger belt system. MSRP: Was: Now: $99.99 Add to Cart
ACDelco O2 Sensor (Bank 1/2 Oxygen Sensor) ACDelco O2 Sensor (Bank 1/2 Oxygen Sensor) Part Numbers: 12617332, 2134408 Sold individually, two required per vehicle MSRP: Was: Now: $99.99 Add to Cart
DMS 50mm Supercharger Idler Pulley DMS 50mm Supercharger Idler Pulley – High RPM Billet Design for LS9 & LSA Systems Precision-engineered for high-performance supercharged setups While 50mm idler pulleys are often considered less ideal due to the stress high RPMs place on... MSRP: Was: Now: $99.99 Add to Cart
DMS Wide LT4 Tensioner Pulley DMS Wide LT4 Tensioner Pulley – Fix Belt Walk & Squeal for Good If you’ve noticed belt squeal, chirping, or even found a rib missing on your LT4 supercharger belt, chances are the OEM tensioner pulley is to blame. Dedicated Motorsports... MSRP: Was: Now: $99.99 Add to Cart
Sale DSX Tuning LSA/LT4 9.45" Lower Pulley (wet sump) "Open box" DSX Tuning LSA/LT4 9.45" Lower Pulley (wet sump) " Open Box" This is an open box item but otherwise its brand new These lower pulleys are compatible with ATI part numbers 918854 and 918856 for the LSA and LT4 (Camaro/CTS-V only)... MSRP: Was: $145.00 Now: $94.99 Add to Cart
10 Rib 70mm Idler Pulley 10 Rib 70mm Idler Pulley This pulley is used in the DMS 10 rib kit and can actually accept an 11 rib belt making it acceptable to run on the LS9 belt drive. However this product is designed to replace the factory lower idler on the LSA drive... MSRP: Was: Now: $89.99 Add to Cart
ACDelco Serpentine Belt Tensioner ACDelco Serpentine Belt Tensioner Part Numbers: 12738403, 12658276, 12669076, 12686229 MSRP: Was: Now: $89.99 Add to Cart
DMS 4.5" to 6" Billet Velocity Stack DMS 4.5" to 6" Billet Velocity Stack – CNC Machined Intake Transition Maximize airflow and performance with the DMS Billet Velocity Stack, designed to transition a 4.5” intake tube to a massive 6” air filter inlet with smooth,... MSRP: Was: Now: $89.99 Add to Cart
DMS LSA +5mm Idler Relocation Bracket DMS LSA +5mm Idler Relocation BracketMaximize Belt Wrap for High-Boost LSA Builds When running a larger 9.17" or greater diameter lower crank pulley on your LSA setup, clearance and belt wrap become critical. The Dedicated Motorsports Idler Relocation... MSRP: Was: Now: $89.99 Add to Cart
Sale DSX Tuning LSA/LT4 9.06" Lower Pulley (wet sump) "Open box" DSX Tuning LSA/LT4 9.06" Lower Pulley (wet sump) " Open Box" This is an open box item but otherwise its brand new These lower pulleys are compatible with ATI part numbers 918854 and 918856 for the LSA and LT4 (Camaro/CTS-V only)... MSRP: Was: $140.00 Now: $89.99 Add to Cart
Genuine GM LS9 Head Gasket Genuine GM LS9 Head Gasket Price is each you will need 2 These are the gaskets we use on Turbocharged, Supercharged and Nitrous applications. The LS9 gaskets feature a 7-layer MLS construction that can used an anything up to a 4.100" Bore. These... MSRP: Was: Now: $89.99 Add to Cart
Lingenfelter LSA and LS9 10 bolt Supercharger Pulley Hub Lingenfelter LSA and LS9 10 bolt Supercharger Pulley Hub DescriptionBorn from the speed team that built the first Comp car to break the 6-second quarter-mile, these Lingenfelter Performance Engineering supercharger hubs give you the power to... MSRP: Was: Now: $89.99 Add to Cart
DMS 100mm LSA LS9 Supercharger Idler Pulley DMS 100mm LSA/LS9 Supercharger Idler Pulley Maximize belt wrap and ensure consistent boost with the DMS 100mm Supercharger Idler Pulley. Designed for LSA and LS9 supercharger systems, this pulley is a crucial upgrade when using smaller upper pulleys,... MSRP: Was: Now: $84.99 Add to Cart
DMS 76mm LSA LS9 Supercharger Idler Pulley DMS 76mm LSA LS9 Supercharger Idler Pulley The DMS 76mm idler pulley is commonly used on the LS9 belt system to help establish the proper belt length/tension. These pulleys are made out of 6061 billet aluminum, anodized black and comes standard with a... MSRP: Was: Now: $84.99 Add to Cart
6" Screened Velocity Stack for cold air intake systems or turbos 6" Screened Velocity Stack for Cold Air Intake Systems or Turbos This screen is a great way to make 20-60hp on your supercharged setup during race time. Its common for most intake systems to come with a fairly restrictive air filter element. The... MSRP: Was: Now: $79.99 Add to Cart
Baro Breakout Harness for Gen V DSX BARO Breakout Harness for Gen V The DSX Baro Breakout Harness breaks out the barometric pressure sensor, which allows the calibrator to restore proper calculations in the ECM for pressure ratio on boosted applications. The 3 bar MAP sensor is not... MSRP: Was: Now: $79.99 Choose Options
Green Filter Airaid Replacement 6 Inch Flange Diameter Green Filter Airaid Replacement Part Number: 2382 This filter is a big upgrade for most intakes with a 6 inch inlet flange like what is commonly found on Roto-Fab intakes or comes standard with the DDP or DMS 4.5" Intake systems. Proven to add... MSRP: Was: Now: $79.99 Add to Cart
Lingenfelter Supercharger Solid Isolator Coupling LS9 LSA Engine 2009-2014 Lingenfelter Supercharger Solid Isolator Coupling LS9 LSA Engine 2009-2014 Lingenfelter Supercharger Solid Isolator Coupling LS9 LSA Engine 2009-2014 MSRP: Was: Now: $79.99 Add to Cart
LT4 High Pressure Intermediate Fuel Line LT4 High Pressure Intermediate Fuel Line These fuel lines are a one time use and need to be replaced each time they're removed. Both part numbers 12647277 and 12677005 MSRP: Was: Now: $79.99 Add to Cart
NGK IRIDIUM SPARK PLUGS LTR7IX-11 SET OF (8) NGK IRIDIUM SPARK PLUGS LTR7IX-11 SET OF (8) Weight: 0.14lbs Center Electrode Core Material: Copper Center Electrode Design: Fine Wire Center Electrode Tip Material: Iridium Drive Size: 5/8 in Electrical Terminal... MSRP: Was: Now: $79.99 Add to Cart
NGK IRIDIUM SPARK PLUGS TR7IX SET OF (8) NGK IRIDIUM SPARK PLUGS TR7IX SET OF (8) Weight: 0.10lbs Center Electrode Core Material: Copper Center Electrode Design: Fine Wire Center Electrode Tip Material: Iridium Drive Size: 5/8 in Electrical Terminal Type: Non-Removable Nut Gap - Factory... MSRP: Was: Now: $79.99 Add to Cart
