Shop By Vehicle

Hp Tuners RTD/ MVPI3 Tuner Flash and Logging Device

Hp Tuners RTD/ MVPI3 Tuner Flash and Logging Device   This device is designed to be used for flashing tunes provided by Dedicated Motorsports as well as logging vehicle information to send in for review. We're offering this product mostly for anyone...

ACDelco C7 Corvette Serpentine Belt Tensioner

ACDelco C7 Corvette Serpentine Belt Tensioner Part Number: 12686272

Accel Extreme 9000 Ceramic Spark Plug Wires

Accel Extreme 9000 Ceramic Spark Plug Wires Do you want to put headers on your vehicle, but are afraid you may cook the spark plug wires? Just looking for a nice upgrade for your stock spark plug wires? If you answered yes to any of these questions,...

ARP Gen 4 Head Bolt Kit

ARP Gen 4 Head Bolt Kit   Head Bolt Kit:Chevrolet Small Block, 2004 & later, with all same length bolts, hexKit #: 134-3610Kit Instructions

LS Accel Ceramic Plug Wires

LS Accel Extreme 9000 Ceramic Spark Plug Wires High Heat Race-Ready Ignition Protection Tired of burning spark plug wires on your high-performance LS engine? ACCEL has the ultimate solution for race and street/strip applications where high under-hood...

LT5 11 Rib ZPE GripTec® 2pc MKII L2V Black Pulley Only

ZPE Griptec 10 Rib 2650 Upper Pulley for Edelbrock, Kong or Magnuson Blowers

ZPE Griptec 10 Rib 2650 Upper Pulley for Edelbrock, Kong or Magnuson Blowers   Ultra Lightweight Pulley for TVS 2650.  Made from billet 7075-T6 aerospace grade aluminum. Stronger and harder than 6061 T6. This pulley is equipped with...

DMS +5mm Relocation Bracket and 100mm Idler Pulley

DMS +5mm Relocation Bracket and 100mm Idler Pulley Combo Eliminate belt slippage and optimize belt wrap with the DMS +5mm Relocation Bracket and 100mm Idler Pulley Combo. This kit is specifically designed for high-performance supercharger setups,...

OEM ACDelco L83 L86 Oil Pump

OEM ACDelco L83 L86 Oil Pump Part Number: 12686433 or 12741131   Stay with the parts brand your General Motors vehicle came with and get the quality you know and trust with GM Genuine parts. GM Genuine parts give you the peace of mind that the fit,...

Hawk Performance Brake Pads Rear

Hawk Performance Brake Pads Rear High Performance Street 5.0 Brake Pads; w/ 0.770 ThicknessFor years, engine builders have been pushing motors to the limits of their ability, and at Hawk Performance, we're closer than ever to pushing the ABS Rev Limiter...

Hawk Performance Corvette C8 Base Model, Performance Ceramic Street Rear Brake Pads

Hawk Performance Corvette C8 Performance Ceramic Street Rear Brake Pads - Base Model (Non Z51) Only   - Extremely quiet- Ultra-low dust- Improved stopping power- Gentle on rotors for extended pad life- Stable friction output- All Hawk Performance...

Billet -12 ORB ZL1 Coolant Manifold

DMS Billet -12 ORB ZL1 Coolant Manifold Upgrade your ZL1's cooling system with the DMS Billet -12 ORB Coolant Manifold. This precision-engineered manifold provides a superior solution for converting ZL1 inlet/outlet coolant ports to -12AN connections,...

DMS 10.0" 10 Rib Lower LSA/LT4 Overdrive Pulley for ATI Balancers

DMS 10.0" 10 Rib Lower LSA/LT4 Overdrive Pulley for ATI Balancers While this is a 10 rib pulley, it can absolutely be used with a 8 rib setup. Just use the 8 ribs closest to the engine. No negative side effects to worry about.  Maximize the...

Pierburg CWA400 Trunk Tank Harness with fuse and relay

Pierburg CWA400 Trunk Tank Harness with Fuse & RelayPower your CWA400 water pump reliably and safely with Dedicated Motorsports' premium trunk tank harness. This high-performance wiring harness is specifically designed to run the Pierburg CWA400...

LT4 Supercharger Griptec MKII Pulley- NO HUB

LT4 Supercharger Griptec MKII Pulley- NO HUB This is a replacement 2.30" or 2.50" Griptec Pulley for the LT4 Supercharger. No hub or bolts included.

ZPE MKII LSA Pulley Only

ZPE MKII LSA 10 Bolt Pulley Only   Ultra Lightweight Pulley. Factory GM LSA/TVS, 10 Bolt Pulley. The Pulley is made from billet 7075-T6 aerospace grade aluminum. Stronger and harder than 6061 T6. This pulley is equipped with GripTec® a micro...

Derale 40K Transmission Cooler - 13 Row Plate and Fin

Derale 40K Transmission Cooler - 13 Row Plate and Fin   Very popular with original equipment manufacturers for use on their towing applications, our Plate and Fin coolers feature strong furnace-brazed construction embossed turbulators which maximize...

LSA Serpentine Drive Tensioner (6 Rib)

LSA Serpentine Drive Tensioner (6 Rib) OEM Part Number: 12628025   This is the OEM serpentine belt drive tensioner found on all 09-15 CTS-V and 2012-2015 ZL1 Camaros with the LSA engine. It's a part often overlooked when collecting all the proper...

DMS 9.60" Lower LSA/LT4 Overdrive Pulley for ATI Balancers

DMS 9.60" Lower LSA/LT4 Overdrive Pulley for ATI Balancers Maximize the horsepower potential of your LSA or LT4 supercharger system with the DMS Lower Overdrive Pulley. Engineered to fit 918856 and 918854 ATI harmonic balancers, these pulleys offer a...

DMS 9.60" Overdrive Pulley for ATI Balancer C7 Z06 Corvette (dry sump)

DMS 9.60" Overdrive Pulley for ATI Balancer C7 Z06 Corvette (dry sump) The DMS 9.60" 8 rib balancer pulleys are a great way to increase supercharger RPM resulting in higher airflow and boost levels. These pulleys are CNC machined from 6061 aluminum and...

Eibach C6/C7 Corvette Lower Bolts

Eibach C6/C7 Corvette Lower Bolts   Drop of 0-2.5" Kit consists of height adjustment bolts and urethane pads (not a spring kit). Does not fit Z07 package.

DMS 9.20" Overdrive Pulley for ATI Balancer C7 Z06 Corvette (dry sump)

DMS 9.20" Overdrive Pulley for ATI Balancer C7 Z06 Corvette (dry sump) The DMS 9.20" 8 rib balancer pulleys are a great way to increase supercharger RPM resulting in higher airflow and boost levels. These pulleys are CNC machined from 6061 aluminum and...

DMS 9.20" Lower LSA/LT4 Overdrive Pulley for ATI Balancers

DMS 9.20" Lower LSA/LT4 Overdrive Pulley for ATI Balancers Maximize the horsepower potential of your LSA or LT4 supercharger system with the DMS Lower Overdrive Pulley. Engineered to fit 918856 and 918854 ATI harmonic balancers, these pulleys offer a...

aFe CONTROL Ride Height Simulators

aFe CONTROL Ride Height Simulators   aFe CONTROL Ride Height Simulator modules are a simple plug and play connector that allows installation of aftermarket lowering or lift kits that change vehicle ride height more than 1”. These work in...

DMS 9.05" Lower LSA/LT4 Overdrive Pulley for ATI Balancers

DMS 9.05" Lower LSA/LT4 Overdrive Pulley for ATI Balancers Maximize the horsepower potential of your LSA or LT4 supercharger system with the DMS Lower Overdrive Pulley. Engineered to fit 918856 and 918854 ATI harmonic balancers, these pulleys offer a...

DMS CTS-V -16AN High Flow Billet Water Manifold

DMS CTS-V -16AN High Flow Billet Water Manifold   The DMS billet 16AN High Flow Billet Water Manifold is a direct replacement for the cast 5/8 barb coolant manifold found on the CTS-V LSA supercharger lid. This manifold was designed for high flow...

LS9 ZR1 DMS Blower Blocks

LS9 ZR1 DMS Blower Blocks   These billet coolant blocks are perfect for guys looking to upgrade the cooling system found on the 2009-2013 ZR1 Corvette with the LS9 supercharger. These blocks are cnc machined out of 6061 aluminum and anodized for...

DMS 8.80" Lower LSA/LT4 Overdrive Pulley for ATI Balancers

DMS 8.80" Lower LSA/LT4 Overdrive Pulley for ATI Balancers   Maximize the horsepower potential of your LSA or LT4 supercharger system with the DMS Lower Overdrive Pulley. Engineered to fit 918856 and 918854 ATI harmonic balancers, these pulleys...

Bracket kit for a 40K Transmission cooler 09-15 CTS-V

Bracket kit for a 40K Transmission cooler 09-15 CTS-V   What's included: - Aluminum brackets - All spacers and hardware   If you're looking for the ultimate transmission cooler for your 09-15 CTS-V this is the kit for you. We've managed to...

DMS Turbo Oil Scavenge Tank

DMS Turbo Oil Scavenge Tank Optimize your turbo system's oil return with the DMS Turbo Oil Scavenge Tank, the same high-performance tank used in our renowned DMS twin turbo kits. This tank is designed to efficiently collect and manage oil return from...

OEM LSA Supercharger Tensioner Bracket

OEM LSA Supercharger Tensioner Bracket Part Number: 12606500   This is an OEM supercharger tensioner bracket found on all LSA supercharger belt drive systems. 

ACDelco LT4 Supercharger Belt Tensioner

ACDelco LT4 Supercharger Belt Tensioner Part Number: 12663624

DMS Wide LT4 Tensioner Pulley

DMS Wide LT4 Tensioner Pulley – Fix Belt Walk & Squeal for Good If you’ve noticed belt squeal, chirping, or even found a rib missing on your LT4 supercharger belt, chances are the OEM tensioner pulley is to blame. Dedicated Motorsports...

EBC Redstuff Ceramic Rear Brake Pads 2016+ CTS-V

EBC Redstuff Ceramic Rear Brake Pads 2016+ CTS-V   A great brake performance upgrade for prestige and faster cars EBC’s lowest dust brake pads with 15% brake improvement Combine aramid fiber with ceramic particle enhanced premium brake...

2 Inch Lift/Jack Pucks (Set of 4)

2 Inch Lift/Jack Pucks (Set of 4)   These billet aluminum jack pucks will save your side skirts when lifting your car with a 4 post lift or a floor jack. They have a t-post that fits in the factory body slots and provides a solid lifting point...

High Amperage Coolant Pump Harness Upgrade

High Amperage Coolant Pump Harness Upgrade   As the 09-15 CTS-V continues to age so does the electrical components. This issue is compounded with the addition of aftermarket high flow coolant pumps. This is because factory wiring harness is meant...

PNP EMP Pump Harness for Trunk Tank

PNP EMP Pump Harness for Trunk Tank This plug and play harness is designed for the Stewart Warner EMP pump using a 4 pin DT connector. Since these pumps have a heavy amp draw we designed this harness with 10 gauge wire and a over sized fuse assembly. The...

ACDelco LS9 Plug Wire Set

ACDelco LS9 Plug wire set   Old part number: 19351570 New Part Number: 12731654   This wire set was originally found on the C6 ZR1 LS9 engine but will fit a number of different engines and is the choice wire set for many DMS builds...

GM Continental Flex Fuel Sensor

GM Continental Flex Fuel Sensor   OEM Part Number 13577429 This is an OEM flex fuel sensor from GM. This sensor can be added to most GM vehicles with the proper associated wiring.

DSX Tuning LT4 9.45" Lower Pulley (dry sump C7Z) "Open box"

DSX Tuning LT4 9.45" Lower Pulley (dry sump C7Z) " Open Box" This is an open box item but otherwise its brand new These lower pulleys are compatible with ATI part number 917315 for the C7 LT4 damper. They are machined from 6061 aluminum and...

-10an Low Profile Turbo Drains for Garrett, VS Racing and Xona Rotor Turbos

10an Low Profile Turbo Drains for Garrett, VS Racing and Xona Rotor Turbos ******SOLD AS A PAIR as shown in the photos: Bolt spacing is 1.50"****** The DMS turbo drain fittings are perfect for low mount turbo kits or in any situation where clearance...

ACDelco CTS-V LSA Oil Pump Pickup tube with screen

ACDelco CTS-V LSA Oil Pump Pickup tube with screen Part Number: 12621299

LT4 High Pressure Rail Crossover Fuel Line

LT4 High Pressure Rail Crossover Fuel Line     These fuel lines are a one time use and need to be replaced each time they're removed. Both part numbers 12647277 and 12677005

Trick Flow Flywheel Holding Tools for GM LS/LT Engines

Trick Flow Flywheel Holding Tools for GM LS/LT Engines   DescriptionTorque your harmonic balancer bolt on your LS engine with ease using Trick Flow® flywheel holding tools for GM LS/LT Engines. These specially made tools will hold your...

Deposit for in house dyno tuning on our Mainline hub dyno

Deposit for in house dyno tuning on our Mainline hub dyno This is designed to hold your spot in line, to setup a date or ask additional questions please email matt@dedicatedmotorsports.com The price listed in the dropdown section will be due on the day...

IAT / Baro Breakout Harness for Gen V

DSX IAT/BARO Breakout Harness The DSX IAT/baro Breakout harness allows you to remove the IAT from the MAF assembly on newer vehicles so you can place it closer to the throttle for applications using methanol injection to meet fueling requirements. It...

10 Rib 70mm Idler Pulley

10 Rib 70mm Idler Pulley   This pulley is used in the DMS 10 rib kit and can actually accept an 11 rib belt making it acceptable to run on the LS9 belt drive. However this product is designed to replace the factory lower idler on the LSA drive...

10 Rib Tensioner Pulley

DMS 10-Rib Tensioner Pulley for LSA Engines Upgrade your LSA 10-rib supercharger system with the DMS 10-Rib Grooved Tensioner Pulley and idler spacers. Designed for use with OEM CTS-V or ZL1 tensioners, this pulley ensures optimal belt tension and...

ACDelco LT5 Grooved 11 Rib Supercharger Idler Pulley

ACDelco LT5 Grooved 11 Rib Supercharger Idler Pulley Part Number: 12665034   This 11 rib idler pulley is found on the drivers side tensioner bracket of the LT5 engine and is a part of the supercharger belt system. 

ACDelco O2 Sensor (Bank 1/2 Oxygen Sensor)

ACDelco O2 Sensor (Bank 1/2 Oxygen Sensor) Part Numbers: 12617332, 2134408 Sold individually, two required per vehicle