Corvette

DSX Flex Fuel Kit for 2014+ C7 Corvette Stingray

DSX Flex Fuel Kit for 2014+ C7 Corvette Stingray The DSX Flex Fuel Kit offers a true Plug & Play solution which will allow you to convert your 2014+ C7 Corvette Stingray to use E85 / ethanol based fuels (any blend from 0% to 100%) and unlock the...

DSX Flex Fuel Kit for 2014+ C7 Corvette Z06

DSX Flex Fuel Kit for 2014+ C7 Corvette Z06   The DSX Flex Fuel Kit offers a true Plug & Play solution which will allow you to convert your 2014+ C7 Corvette Z06 to use E85 / ethanol based fuels (any blend from 0% to 100%) and unlock the ability...

DSX LT4/LT5 Upper Idler Bracket System

DSX LT4/LT5 Upper Idler Bracket System   Black anodizing is now standard.    This is for the LT4/LT5 enthusiasts who have wanted extra upper pulley wrap. These brackets are unique to the Camaro/V3 application vs C7.Designed, programmed,...

Fore Innovations LS7 Fuel Rails

Fore Innovations LS7 Fuel Rails DescriptionFore Innovations billet fuel rails for the LS7. Machined from a solid block of 6061 aluminum. Integrated mounting tabs eliminate rail tab flex under the highest intake and fuel pressures. Proper clearances and...

Fore Innovations LS3 Fuel Rails (LS2, L99, L76, LSXr)

Fore Innovations LS3 Fuel Rails (LS2, L99, L76, LSXr)   DescriptionFore Innovations billet fuel rails for the LS2, LS3, L76, L99 motors, as well as Fast LSXr 102mm intakes for LS1, LS2, LS3, LS6, LS7, L99, L76. Machined from a solid block of 6061...

ARP -Performance Main Stud kit for all LT engines 234-5802

ARP -Performance Main Stud kit for all LT engines 234-5802 ARP main stud kits are made from 8740 chromoly steel and have a 190,000 psi tensile-strength rating. They are precision centerless-ground and thread-rolled to Mil-S-8879 specs, with a black oxide...

ACDelco LT1/LT4/LT5 Corvette Oil Cooler Core

ACDelco LT1/LT4/LT5 Corvette Oil Cooler Core Part Number: 12659714

ARP - LT head bolt kit - 12 point (234-3710)

ARP - LT head bolt kit - 12 point (234-3710) The Pro Series cylinder head bolts from ARP are cold-forged to ensure molecular integrity. They are heat-treated prior to thread rolling and machining, and are rated at a whopping 190,000 psi. All kits come...

CHE Trunnion Upgrade LS and LT for stock rockers

CHE Trunnion Upgrade LS and LT   You don’t have to worry about nasty needle bearings escaping into your engine anymore! We have a high performance, high RPM solution! CHE Precision offers LS/LT, Ford 7.3L Godzilla, and Viper Trunnion Kit...

DB-Blue Gauge / LC-2 Kit

DB-Blue Gauge / LC-2 Kit This kit comes complete with the patented award-winning LC-2 Wideband Controller, DB-Blue Gauge, Bosch LSU 4.9 Wideband O2 Sensor, 8ft Sensor Cable, Bung, Serial Cable, and Manual.

Black DMS Billet Thermostat Housing with LS3 Style 160 Degree Thermostat for all Gen V LT Engines

BLACK Anodized DMS Billet Thermostat Housing with LS3 Style 160 Degree Thermostat for All Gen V LT Engines   Dedicated Motorsports brings you a bolt on replacement for the OEM plastic thermostat housing found on all Gen V LT motors. This plastic...

ACDelco LT1/LT4 Drysump crank timing sprocket

ACDelco LT4 Drysump crank timing sprocket Part Number: 12631215

LT4 Pulley & Hub 2.30" Black Griptec V2

LT4 Pulley & Hub 2.30" Black Griptec V2   Product DescriptionThis Ultra Lightweight Pulley Upgrade for ZPE Pulley Hub system. (No machining of the snout needed) Fits factory GM LT4, this 10 Bolt Pulley is designed to be paired with our ZPE MK II...

Hawk Performance Brake Pads Front

Hawk Performance Brake Pads Front High Performance Street 5.0 Brake Pads; w/ 0.770 ThicknessFor years, engine builders have been pushing motors to the limits of their ability, and at Hawk Performance, we're closer than ever to pushing the ABS Rev Limiter...

Mishimoto 14-19 Chevy Corvette Stingray/Z06 Black Silicone Radiator Hose Kit

Mishimoto 14-19 Chevy Corvette Stingray/Z06 Black Silicone Radiator Hose Kit   Rubber is out, silicone is in! Upgrade your Corvette radiator hoses with the Mishimoto 2014-2019 Chevrolet Corvette radiator hose kit to provide your ?Vette with an...

DMS Billet Thermostat Housing with 160 Degree Thermostat for all Gen V LT Engines

DMS Billet Thermostat Housing with LS3 Style 160 Degree Thermostat for All Gen V LT Engines Dedicated Motorsports brings you a bolt on replacement for the OEM plastic thermostat housing found on all Gen V LT motors. This plastic housing is prone to...

Fuelab 6 Micron Microfiberglass 5" Fuel Filter (E85)

Fuelab 6 Micron Microfiberglass 5" Fuel Filter (E85)   Choice of -6AN, -8AN, -10AN or -12AN inlet/outlet Fuelab filter with long (5 inch) 6 micron / Micro-Fiberglass Element - Our most advanced filter element provides extra particle protection and...

Hp Tuners RTD/ MVPI3 Tuner Flash and Logging Device

Hp Tuners RTD/ MVPI3 Tuner Flash and Logging Device   This device is designed to be used for flashing tunes provided by Dedicated Motorsports as well as logging vehicle information to send in for review. We're offering this product mostly for anyone...

ACDelco C7 Corvette Serpentine Belt Tensioner

ACDelco C7 Corvette Serpentine Belt Tensioner Part Number: 12686272

ACDelco Starter for LT Engines NEW

ACDelco Starter for LT Engines NEW All applicable part numbers:  12740951,12619241, 12652772, 12691976, 12714470, 12724248

ARP Gen 4 Head Bolt Kit

ARP Gen 4 Head Bolt Kit   Head Bolt Kit:Chevrolet Small Block, 2004 & later, with all same length bolts, hexKit #: 134-3610Kit Instructions

Fuelab 6 Micron Microfiberglass 3" Fuel Filter (E85)

Fuelab 6 Micron Microfiberglass 3" Fuel Filter (E85)   Choice of -6AN, -8AN, -10AN or -12AN inlet/outlet Fuelab filter with long (3 inch) 6 micron / Micro-Fiberglass Element - Our most advanced filter element provides extra particle protection and...

LT5 11 Rib ZPE GripTec® 2pc MKII L2V Black Pulley Only

DMS -10an High Flow Billet Catch Can

DMS -10AN High Flow Billet Catch Can Engineered to harness crankcase pressure, our DMS catch can uses high air velocity to effectively separate oil droplets from your engine’s crankcase air. As the oil/air mixture enters the can, it is forced into...

Hawk Performance Brake Pads Rear

Hawk Performance Brake Pads Rear High Performance Street 5.0 Brake Pads; w/ 0.770 ThicknessFor years, engine builders have been pushing motors to the limits of their ability, and at Hawk Performance, we're closer than ever to pushing the ABS Rev Limiter...

Accel Extreme 9000 Ceramic Spark Plug Wires

Accel Extreme 9000 Ceramic Spark Plug Wires Do you want to put headers on your vehicle, but are afraid you may cook the spark plug wires? Just looking for a nice upgrade for your stock spark plug wires? If you answered yes to any of these questions,...

DMS -10an High Flow Catch Can with recirculating top

DMS -10AN High Flow Billet Catch Can with Recirculating Top Engineered for High-Performance Crankcase Ventilation Control Building on the success of our original billet catch can, DMS now offers a recirculating top version — a highly requested...

LS Accel Ceramic Plug Wires

LS Accel Extreme 9000 Ceramic Spark Plug Wires High Heat Race-Ready Ignition Protection Tired of burning spark plug wires on your high-performance LS engine? ACCEL has the ultimate solution for race and street/strip applications where high under-hood...

Pierburg CWA400 Trunk Tank Harness with fuse and relay

Pierburg CWA400 Trunk Tank Harness with Fuse & RelayPower your CWA400 water pump reliably and safely with Dedicated Motorsports' premium trunk tank harness. This high-performance wiring harness is specifically designed to run the Pierburg CWA400...

LT4 Supercharger Griptec MKII Pulley- NO HUB

LT4 Supercharger Griptec MKII Pulley- NO HUB This is a replacement 2.30" Griptec Pulley for the LT4 Supercharger. No hub or bolts included.

Eibach C6/C7 Corvette Lower Bolts

Eibach C6/C7 Corvette Lower Bolts   Drop of 0-2.5" Kit consists of height adjustment bolts and urethane pads (not a spring kit). Does not fit Z07 package.

LT5 Supercharger Belt Tensioner

LT5 Supercharger Belt Tensioner   OEM Part Number - 12683675

aFe CONTROL Ride Height Simulators

aFe CONTROL Ride Height Simulators   aFe CONTROL Ride Height Simulator modules are a simple plug and play connector that allows installation of aftermarket lowering or lift kits that change vehicle ride height more than 1”. These work in...

LS9 ZR1 DMS Blower Blocks

LS9 ZR1 DMS Blower Blocks   These billet coolant blocks are perfect for guys looking to upgrade the cooling system found on the 2009-2013 ZR1 Corvette with the LS9 supercharger. These blocks are cnc machined out of 6061 aluminum and anodized for...

DMS 9.60" C7Z LT4 for ATI Balancer

DMS 9.60" C7Z LT4 for ATI Balancer The DMS 9.60" 8 rib balancer pulleys are a great way to increase supercharger RPM resulting in higher airflow and boost levels. These pulleys are CNC machined from 6061 aluminum and anodized for longevity. Designed to...

DMS 9.20" C7Z LT4 for ATI Balancer 15% OD

DMS 9.20" C7Z LT4 for ATI Balancer The DMS 9.20" 8 rib balancer pulleys are a great way to increase supercharger RPM resulting in higher airflow and boost levels. These pulleys are CNC machined from 6061 aluminum and anodized for longevity. Designed to...

ACDelco LT4 Supercharger Belt Tensioner

ACDelco LT4 Supercharger Belt Tensioner Part Number: 12663624

2 Inch Lift/Jack Pucks (Set of 4)

2 Inch Lift/Jack Pucks (Set of 4)   These billet aluminum jack pucks will save your side skirts when lifting your car with a 4 post lift or a floor jack. They have a t-post that fits in the factory body slots and provides a solid lifting point...

GM Continental Flex Fuel Sensor

GM Continental Flex Fuel Sensor   OEM Part Number 13577429 This is an OEM flex fuel sensor from GM. This sensor can be added to most GM vehicles with the proper associated wiring.

LT4 High Pressure Rail Crossover Fuel Line

LT4 High Pressure Rail Crossover Fuel Line     These fuel lines are a one time use and need to be replaced each time they're removed. Both part numbers 12647277 and 12677005

IAT / Baro Breakout Harness for Gen V

DSX IAT/BARO Breakout Harness The DSX IAT/baro Breakout harness allows you to remove the IAT from the MAF assembly on newer vehicles so you can place it closer to the throttle for applications using methanol injection to meet fueling requirements. It...

ACDelco LT5 Grooved 11 Rib Supercharger Idler Pulley

ACDelco LT5 Grooved 11 Rib Supercharger Idler Pulley Part Number: 12665034   This 11 rib idler pulley is found on the drivers side tensioner bracket of the LT5 engine and is a part of the supercharger belt system. 

ACDelco LT5 Grooved 11 Rib Supercharger Idler Pulley water pump

ACDelco LT5 Grooved 11 Rib Supercharger Idler Pulley Part Number: 12665033   This 11 rib idler pulley is found on the water pump of the LT5 engine and is a part of the supercharger belt system. 

DMS 50mm Supercharger Idler Pulley

DMS 50mm Supercharger Idler Pulley – High RPM Billet Design for LS9 & LSA Systems Precision-engineered for high-performance supercharged setups While 50mm idler pulleys are often considered less ideal due to the stress high RPMs place on...

Trick Flow Flywheel Holding Tools for GM LS

Trick Flow Flywheel Holding Tools for GM LS   DescriptionTorque your harmonic balancer bolt on your LS engine with ease using Trick Flow® flywheel holding tools for GM LS. These specially made tools will hold your crankshaft in place while you...

10 Rib 70mm Idler Pulley

10 Rib 70mm Idler Pulley   This pulley is used in the DMS 10 rib kit and can actually accept an 11 rib belt making it acceptable to run on the LS9 belt drive. However this product is designed to replace the factory lower idler on the LSA drive...

DMS Wide LT4 Tensioner Pulley

DMS Wide LT4 Tensioner Pulley – Fix Belt Walk & Squeal for Good If you’ve noticed belt squeal, chirping, or even found a rib missing on your LT4 supercharger belt, chances are the OEM tensioner pulley is to blame. Dedicated Motorsports...

Genuine GM LS9 Head Gasket

Genuine GM LS9 Head Gasket Price is each you will need 2   These are the gaskets we use on Turbocharged, Supercharged and Nitrous applications. The LS9 gaskets feature a 7-layer MLS construction that can used an anything up to a 4.100" Bore. These...

ACDelco O2 Sensor (Bank 1/2 Oxygen Sensor)

ACDelco O2 Sensor (Bank 1/2 Oxygen Sensor) Part Numbers: 12617332, 2134408 Sold individually, two required per vehicle

DMS 100mm LSA LS9 Supercharger Idler Pulley

DMS 100mm LSA/LS9 Supercharger Idler Pulley Maximize belt wrap and ensure consistent boost with the DMS 100mm Supercharger Idler Pulley. Designed for LSA and LS9 supercharger systems, this pulley is a crucial upgrade when using smaller upper pulleys,...