Sale Hp Tuners RTD/ MVPI3 Tuner Flash and Logging Device MSRP: Was: $299.99 Now: $209.99 Choose Options
99-07 Chevrolet/GMC Truck & Suv Trans Cooler/ Heat Exchanger Bracket MSRP: Was: Now: $150.00 Choose Options
DMS Lower LSA/LT4 Overdrive pulley for ATI balancers MSRP: Was: Now: $132.99 - $154.99 Choose Options
Polished DMS Billet Center Cap for Weld Wheels 31mm Height MSRP: Was: Now: $69.99 - $79.99 Choose Options
Polished DMS Billet Center Cap for Weld Wheels 36mm Height MSRP: Was: Now: $69.99 - $79.99 Choose Options
Combo Corvette, CTS-V and Camaro LT4 SC Coolant Filler Adapter Tool MSRP: Was: Now: $34.99 Add to Cart
Sale Hp Tuners RTD/ MVPI3 Tuner Flash and Logging Device Hp Tuners RTD/ MVPI3 Tuner Flash and Logging Device This device is designed to be used for flashing tunes provided by Dedicated Motorsports as well as logging vehicle information to send in for review. We're offering this product mostly for anyone... MSRP: Was: $299.99 Now: $209.99 Choose Options
DMS 10 Rib 100mm idler and relo bracket with 1/2 bolt mod DMS 10 Rib 100mm idler and relo bracket with 1/2 bolt mod This is the standard DMS +5MM relo bracket that's been modified to accept a 1/2-20 Grade 8 bolt. By upgrading the diameter of this bolt we can prevent deflection caused by the larger 2650... MSRP: Was: Now: $199.99 Add to Cart
DMS -10an High Flow Billet Catch Can DMS -10AN High Flow Billet Catch Can Engineered to harness crankcase pressure, our DMS catch can uses high air velocity to effectively separate oil droplets from your engine’s crankcase air. As the oil/air mixture enters the can, it is forced into... MSRP: Was: Now: $179.99 Choose Options
DMS -10an High Flow Catch Can with recirculating top DMS -10AN High Flow Billet Catch Can with Recirculating Top Engineered for High-Performance Crankcase Ventilation Control Building on the success of our original billet catch can, DMS now offers a recirculating top version — a highly requested... MSRP: Was: Now: $169.99 Choose Options
Pierburg CWA400 Trunk Tank Harness with fuse and relay Pierburg CWA400 Trunk Tank Harness with Fuse & RelayPower your CWA400 water pump reliably and safely with Dedicated Motorsports' premium trunk tank harness. This high-performance wiring harness is specifically designed to run the Pierburg CWA400... MSRP: Was: Now: $169.99 Choose Options
DMS +5mm Relocation Bracket and 100mm Idler Pulley DMS +5mm Relocation Bracket and 100mm Idler Pulley Combo Eliminate belt slippage and optimize belt wrap with the DMS +5mm Relocation Bracket and 100mm Idler Pulley Combo. This kit is specifically designed for high-performance supercharger setups,... MSRP: Was: Now: $159.99 Add to Cart
99-07 Chevrolet/GMC Truck & Suv Trans Cooler/ Heat Exchanger Bracket 99–07 Chevrolet/GMC Truck & SUV Transmission Cooler & Heat Exchanger Mounting Bracket Looking to upgrade your 1999–2007 GM full-size truck or SUV with a transmission cooler or heat exchanger? This custom bracket is your bolt-on... MSRP: Was: Now: $150.00 Choose Options
Billet -12 ORB ZL1 Coolant Manifold DMS Billet -12 ORB ZL1 Coolant Manifold Upgrade your ZL1's cooling system with the DMS Billet -12 ORB Coolant Manifold. This precision-engineered manifold provides a superior solution for converting ZL1 inlet/outlet coolant ports to -12AN connections,... MSRP: Was: Now: $149.99 Choose Options
DMS CTS-V -16AN High Flow Billet Water Manifold DMS CTS-V -16AN High Flow Billet Water Manifold The DMS billet 16AN High Flow Billet Water Manifold is a direct replacement for the cast 5/8 barb coolant manifold found on the CTS-V LSA supercharger lid. This manifold was designed for high flow... MSRP: Was: Now: $149.99 Add to Cart
LS9 ZR1 DMS Blower Blocks LS9 ZR1 DMS Blower Blocks These billet coolant blocks are perfect for guys looking to upgrade the cooling system found on the 2009-2013 ZR1 Corvette with the LS9 supercharger. These blocks are cnc machined out of 6061 aluminum and anodized for... MSRP: Was: Now: $149.99 Choose Options
DMS 9.60" C7Z LT4 for ATI Balancer DMS 9.60" C7Z LT4 for ATI Balancer The DMS 9.60" 8 rib balancer pulleys are a great way to increase supercharger RPM resulting in higher airflow and boost levels. These pulleys are CNC machined from 6061 aluminum and anodized for longevity. Designed to... MSRP: Was: Now: $144.99 Add to Cart
DMS 9.20" C7Z LT4 for ATI Balancer 15% OD DMS 9.20" C7Z LT4 for ATI Balancer The DMS 9.20" 8 rib balancer pulleys are a great way to increase supercharger RPM resulting in higher airflow and boost levels. These pulleys are CNC machined from 6061 aluminum and anodized for longevity. Designed to... MSRP: Was: Now: $141.99 Add to Cart
Bracket kit for a 40K Transmission cooler 09-15 CTS-V Bracket kit for a 40K Transmission cooler 09-15 CTS-V What's included: - Aluminum brackets - All spacers and hardware If you're looking for the ultimate transmission cooler for your 09-15 CTS-V this is the kit for you. We've managed to... MSRP: Was: Now: $139.99 Choose Options
DMS Turbo Oil Scavenge Tank DMS Turbo Oil Scavenge Tank Optimize your turbo system's oil return with the DMS Turbo Oil Scavenge Tank, the same high-performance tank used in our renowned DMS twin turbo kits. This tank is designed to efficiently collect and manage oil return from... MSRP: Was: Now: $139.99 Add to Cart
DMS Lower LSA/LT4 Overdrive pulley for ATI balancers DMS Lower LSA/LT4 Overdrive Pulley for ATI Balancers Maximize the horsepower potential of your LSA or LT4 supercharger system with the DMS Lower Overdrive Pulley. Engineered to fit 918856 and 918854 ATI harmonic balancers, these pulleys offer a range of... MSRP: Was: Now: $132.99 - $154.99 Choose Options
-10an Low Profile Turbo Drain for GT and Xona Rotor Turbos 10an Low Profile Turbo Drain for GT and Xona Rotor Turbos SOLD AS A PAIR as shown in the photosThe DMS turbo drain fittings are perfect for low mount turbo kits or in any situation where clearnce under the turbo is an issue. These come standard... MSRP: Was: Now: $99.99 Add to Cart
DMS 09-15 CTS-V Coupe Passenger Side EMP Pump Mount DMS 09-15 CTS-V Coupe Passenger Side EMP Pump Mount Since the coupes have such a small trunk compartment, it can be challenging to mount an EMP pump and ice box in the same area. DMS designed this bracket to mount the EMP pump under the passenger... MSRP: Was: Now: $99.99 Add to Cart
DMS 50mm Supercharger Idler Pulley DMS 50mm Supercharger Idler Pulley – High RPM Billet Design for LS9 & LSA Systems Precision-engineered for high-performance supercharged setups While 50mm idler pulleys are often considered less ideal due to the stress high RPMs place on... MSRP: Was: Now: $99.99 Add to Cart
DMS Defrost Vent Dual Gauge Pod 52mm (2.065") DMS Defrost Vent Dual Gauge Pod 52mm (2.065") This gauge pod is built off the single platform and has a 2nd pod added at 45 degrees to give the user room for that added gauge with out having to sacrifice the clock. The depth of both pods are... MSRP: Was: Now: $99.99 Choose Options
PNP EMP Pump Harness for Trunk Tank PNP EMP Pump Harness for Trunk Tank This plug and play harness is designed for the Stewart Warner EMP pump using a 4 pin DT connector. Since these pumps have a heavy amp draw we designed this harness with 10 gauge wire and a over sized fuse assembly. The... MSRP: Was: Now: $99.99 Add to Cart
10 Rib 70mm Idler Pulley 10 Rib 70mm Idler Pulley This pulley is used in the DMS 10 rib kit and can actually accept an 11 rib belt making it acceptable to run on the LS9 belt drive. However this product is designed to replace the factory lower idler on the LSA drive... MSRP: Was: Now: $89.99 Add to Cart
10 Rib Tensioner Pulley DMS 10-Rib Tensioner Pulley for LSA Engines Upgrade your LSA 10-rib supercharger system with the DMS 10-Rib Grooved Tensioner Pulley and idler spacers. Designed for use with OEM CTS-V or ZL1 tensioners, this pulley ensures optimal belt tension and... MSRP: Was: Now: $89.99 Add to Cart
DMS CTS-V -12AN Billet Water Manifold DMS CTS-V -12AN Billet Water Manifold Dedicated Motorsports brings you our billet aluminum constructed -12an in/out manifold for your CTS-V Lid, made here in-house. This piece uses factory hardware and O-ring, and is quick and easy to... MSRP: Was: Now: $89.99 Choose Options
DMS LSA +5mm Idler Relocation Bracket DMS LSA +5mm Idler Relocation BracketMaximize Belt Wrap for High-Boost LSA Builds When running a larger 9.17" or greater diameter lower crank pulley on your LSA setup, clearance and belt wrap become critical. The Dedicated Motorsports Idler Relocation... MSRP: Was: Now: $89.99 Add to Cart
DMS Wide LT4 Tensioner Pulley DMS Wide LT4 Tensioner Pulley – Fix Belt Walk & Squeal for Good If you’ve noticed belt squeal, chirping, or even found a rib missing on your LT4 supercharger belt, chances are the OEM tensioner pulley is to blame. Dedicated Motorsports... MSRP: Was: Now: $89.99 Add to Cart
DMS 100mm LSA LS9 Supercharger Idler Pulley DMS 100mm LSA/LS9 Supercharger Idler Pulley Maximize belt wrap and ensure consistent boost with the DMS 100mm Supercharger Idler Pulley. Designed for LSA and LS9 supercharger systems, this pulley is a crucial upgrade when using smaller upper pulleys,... MSRP: Was: Now: $84.99 Add to Cart
DMS 76mm LSA LS9 Supercharger Idler Pulley DMS 76mm LSA LS9 Supercharger Idler Pulley The DMS 76mm idler pulley is commonly used on the LS9 belt system to help establish the proper belt length/tension. These pulleys are made out of 6061 billet aluminum, anodized black and comes standard with a... MSRP: Was: Now: $84.99 Add to Cart
Polished DMS Billet Center Cap for Weld Wheels 31mm Height Polished DMS Billet Center Cap for Weld Wheels 31mm Height Clean up the look look of your weld wheels with this new center cap option from Dedicated Motorsports. These caps are cnc machined from 6061 aluminum and anodized to match the weld wheel color... MSRP: Was: Now: $69.99 - $79.99 Choose Options
Polished DMS Billet Center Cap for Weld Wheels 36mm Height Polished DMS Billet Center Cap for Weld Wheels 36mm Height Clean up the look look of your weld wheels with this new center cap option from Dedicated Motorsports. These caps are cnc machined from 6061 aluminum and anodized to match the weld wheel color... MSRP: Was: Now: $69.99 - $79.99 Choose Options
DMS Custom 90 and 135 degree 2.5" Couplers DMS Custom 90 and 135 degree 2.5" Couplers These are replacement couplers for the DMS TT Kit. Drivers/Passenger side turbo outlet. MSRP: Was: Now: $65.00 Add to Cart
Single -10an Low Profile Turbo Drain for GT and Xona Rotor Turbos Single 10an Low Profile Turbo Drain for GT and Xona Rotor Turbos SOLD AS A SingleThe DMS turbo drain fittings are perfect for low mount turbo kits or in any situation where clearance under the turbo is an issue. These come standard with a -10an... MSRP: Was: Now: $54.99 Add to Cart
DMS Auxiliary Fuel Pump Kit Optional Drill & Tap DMS Auxiliary Fuel Pump Kit Optional Drill & Tap Need to purchase the correct drill and tap kit for the DSX Auxiliary Fuel Pump Kit for your ZL1, CTS-V, or C6/Z06 Corvette? Look no further! This kit is the only recommended kit that includes both the... MSRP: Was: Now: $50.00 Add to Cart
DMS Billet Center Cap for Weld Wheels 31mm Height DMS Billet Center Cap for Weld Wheels 31mm Height Clean up the look look of your weld wheels with this new center cap option from Dedicated Motorsports. These caps are cnc machined from 6061 aluminum and anodized to match the weld wheel color. These caps... MSRP: Was: Now: $49.99 - $59.99 Choose Options
DMS Billet Center Cap for Weld Wheels 36mm Height DMS Billet Center Cap for Weld Wheels 36mm Height Clean up the look look of your weld wheels with this new center cap option from Dedicated Motorsports. These caps are cnc machined from 6061 aluminum and anodized to match the weld wheel color (non faded)... MSRP: Was: Now: $49.99 - $59.99 Choose Options
DMS Defrost Vent Gauge Pod 52mm (2.065") DMS Defrost Vent Gauge Pod 52mm (2.065") This gauge pod is designed to replace the drivers side defrost vent on all 2009-2015 Cadillac CTS-V's allowing for the install of most 52mm or 2-1/16 Inch gauges. These pods are 3D printed in house and... MSRP: Was: Now: $49.99 Choose Options
DMS Defrost Vent Gauge Pod 60mm (2.36") DMS Defrost Vent Gauge Pod 60mm (2.36") This gauge pod is designed to replace the drivers side defrost vent on all 2009-2015 Cadillac CTS-V's allowing for the install of most 60mm or 2.36" Inch gauges. These pods are 3D printed in house and... MSRP: Was: Now: $49.99 Add to Cart
DMS Defrost Vent Gauge Pod 66mm (2.60") DMS Defrost Vent Gauge Pod 66mm (2.60") This gauge pod is designed to replace the drivers side defrost vent on all 2009-2015 Cadillac CTS-V's allowing for the install of most 66mm or 2.60" Inch gauges. These pods are 3D printed in house and... MSRP: Was: Now: $49.99 Add to Cart
Exa Pump Bracket for 09-15 CTS-V Turbo Kit Exa Pump Bracket for 09-15 CTS-V Turbo Kit This bracket mounts the Turbowerx Exa Pump in the factory intercooler pump location. MSRP: Was: Now: $45.00 Add to Cart
DMS Billet Y-Fitting 1.00*3/4*3/4 DMS Billet Y-Fitting – 1.00" x 3/4" x 3/4" Say goodbye to cracked plastic Y-fittings. The Dedicated Motorsports Billet Y-Fitting offers a high-strength, long-lasting solution for your cooling or fluid routing setup. Precision-machined from 6061... MSRP: Was: Now: $44.99 Choose Options
DMS Billet Y-Fitting 3/4*3/4*3/4 DMS Billet Y-Fitting 3/4*3/4*3/4 Tired of plastic fittings breaking after a couple month of use? Dedicated Motorsports has a solution for you. These billet 3/4 inch Y-fittings are made from billet 6061 aluminum and anodized black for... MSRP: Was: Now: $44.99 Choose Options
DMS Remote Mount GM 3 Bar Map Sensor DMS Remote Mount GM 3 Bar Map Sensor The DMS billet remote mount GM map sensor fitting is perfect for any engine with aftermarket intake manifolds lacking OEM map sensor provisions. The flange is designed for all Gen 4 or Gen 5 three wire sensors... MSRP: Was: Now: $38.99 Choose Options
GM 1/8 NPT Map Sensor Adapter GM 1/8 NPT Map Sensor Adapter DMS 1/8" NPT MAP Sensor Adapter for GM LS Engines Introducing the DMS 1/8" NPT MAP Sensor Adapter, a versatile solution for expanding your GM LS engine's monitoring capabilities. This adapter allows you to easily tap into... MSRP: Was: Now: $38.99 Choose Options
Sale ZR1 EMP Pump Bracket ZR1 EMP Pump Bracket This bracket is designed to mount an EMP coolant pump near the factory coolant pump location for the C6 ZR1. The bracket is CNC machined out of a single piece of 6061 billet aluminum and anodized black. Four M8X1.25... MSRP: Was: $49.99 Now: $37.99 Add to Cart
6L80/6L90/8L90/10L90 Transmission Cooler Line Adapter 6L80/6L90/8L90/10L90 Transmission Cooler Line Adapter The DMS line adapter bolts onto any 6L80/6L90/8L90/10L90 and makes connecting aftermarket or custom transmission lines a breeze. Choose from either -6an or -8an depending on your application... MSRP: Was: Now: $36.99 Choose Options
LT4 Valley Plug LT4 Supercharger Valley Plug – Reduce Oil Blow-By and Improve Intercooler Efficiency Keep your LT4 running cleaner and cooler with the Dedicated Motorsports LT4 Valley Plug. This precision CNC-machined billet plug is designed to block the oil... MSRP: Was: Now: $35.00 Add to Cart
Combo Corvette, CTS-V and Camaro LT4 SC Coolant Filler Adapter Tool Combo Corvette, CTS-V and Camaro LT4 SC Coolant Filler Adapter Tool Now made out of billet aluminum! Lets face it, the coolant filling system found on the LT4 supercharged C7 Corvette, Camaro ZL1 and CTS-V can be a real pain in the butt to fill... MSRP: Was: Now: $34.99 Add to Cart
LSA/LT4 Snout Block Off Plates LSA/LT4 Snout Block Off Plates Clean up the front of your LSA or LT4 supercharger with these snout block off plates from Dedicated Motorsports. Each piece is machined from 6061 aluminum and anodized black. Countersink hardware and o-rings are included... MSRP: Was: Now: $29.99 Add to Cart
Nord-lock Suspension Locking Washers Nord-Lock Suspension Locking Washers – CTS-V Front Lower Control Arm Fix (Set of 4)Secure Your Suspension. Protect Your Subframe. A known weak point in the Cadillac CTS-V front suspension is the tendency for the lower control arm bolts to loosen... MSRP: Was: Now: $29.99 Add to Cart
DMS Catch Can Billet Clamp DMS Catch Can Billet Clamp This clamp is designed to hold the DMS round catch can. It has 2 M6x1.00 Threaded holes for attaching to a bracket or panel. Hardware is included. MSRP: Was: Now: $28.99 Add to Cart
3/4 Inch Billet Tee Fitting 3/4 Inch Billet Tee Fitting The DMS 3/4 inch tee fittings is machined out of a solid piece of 6061 aluminum and anodized to prevent corrosion. These are a great way to tee off coolant lines on cooling systems with multiple intercoolers and are a more... MSRP: Was: Now: $26.99 Choose Options
