Lingenfelter Supercharger Isolator Coupling LS9 LSA Engine 2009-2014 MSRP: Was: Now: $69.99 Add to Cart
Polished DMS Billet Center Cap for Weld Wheels 31mm Height MSRP: Was: Now: $69.99 - $79.99 Choose Options
Polished DMS Billet Center Cap for Weld Wheels 36mm Height MSRP: Was: Now: $69.99 - $79.99 Choose Options
ARP GM LS1/LS2/LS3/LS6/LSA 5.7L/6.0L Wet Sump LT4 Balancer Bolt Kit MSRP: Was: Now: $39.99 Add to Cart
Combo Corvette, CTS-V and Camaro LT4 SC Coolant Filler Adapter Tool MSRP: Was: Now: $34.99 Add to Cart
LS3 MAF Mass Air Flow Sensor Weld Bung (for LS Custom Intake Tube) MSRP: Was: Now: $23.99 Add to Cart
DMS LSA +5mm Idler Relocation Bracket DMS LSA +5mm Idler Relocation Bracket This bracket is required when using a 9.17" or larger diameter lower crank pulley. The relo bracket is designed to move the factory lower idler to clear the larger crankshaft pulleys. DMS has taken it a step futher... MSRP: Was: Now: $89.99 Add to Cart
DMS Wide LT4 Tensioner Pulley DMS Wide LT4 Tensioner Pulley Dedicated Motorsports brings you a solution to a not so well known issue. Chances are you may have experienced this issue if you've heard a squeaking/chirping noise from your LT4 supercharger belt or maybe you lost a... MSRP: Was: Now: $89.99 Add to Cart
DMS 100mm LSA LS9 Supercharger Idler Pulley DMS 100mm LSA/LS9 Supercharger Idler Pulley Maximize belt wrap and ensure consistent boost with the DMS 100mm Supercharger Idler Pulley. Designed for LSA and LS9 supercharger systems, this pulley is a crucial upgrade when using smaller upper pulleys,... MSRP: Was: Now: $84.99 Add to Cart
DMS 76mm LSA LS9 Supercharger Idler Pulley DMS 76mm LSA LS9 Supercharger Idler Pulley The DMS 76mm idler pulley is commonly used on the LS9 belt system to help establish the proper belt length/tension. These pulleys are made out of 6061 billet aluminum, anodized black and comes standard with a... MSRP: Was: Now: $84.99 Add to Cart
ACDelco LS9 Plug Wire Set ACDelco LS9 Plug wire set This wire set was originally found on the C6 ZR1 LS9 engine but will fit a number of different engines and is the choice wire set for many DMS builds. (Price is for a set of 8 wires, no metal shields included) MSRP: Was: Now: $81.99 Add to Cart
6" Screened Velocity Stack for cold air intake systems or turbos 6" Screened Velocity Stack for Cold Air Intake Systems or Turbos This screen is a great way to make 20-60hp on your supercharged setup during race time. Its common for most intake systems to come with a fairly restrictive air filter element. The... MSRP: Was: Now: $79.99 Add to Cart
LT4 High Pressure Intermediate Fuel Line LT4 High Pressure Intermediate Fuel Line These fuel lines are a one time use and need to be replaced each time they're removed. Both part numbers 12647277 and 12677005 MSRP: Was: Now: $79.99 Add to Cart
NGK IRIDIUM SPARK PLUGS LTR7IX-11 SET OF (8) NGK IRIDIUM SPARK PLUGS LTR7IX-11 SET OF (8) Weight: 0.14lbs Center Electrode Core Material: Copper Center Electrode Design: Fine Wire Center Electrode Tip Material: Iridium Drive Size: 5/8 in Electrical Terminal... MSRP: Was: Now: $79.99 Add to Cart
Green Filter Airaid Replacement Green Filter Airaid Replacement Upgrade your stock Airaid filter with this high flow green filter. Proven to add 15-20hp Filter DimensionsMounting Inside Diameter 6.00 inchesOutside Diameter - Base 7.50 inchesOutside Diameter - Top 4.75 inchesFilter... MSRP: Was: Now: $79.00 Add to Cart
NGK IRIDIUM SPARK PLUGS TR7IX SET OF (8) NGK IRIDIUM SPARK PLUGS TR7IX SET OF (8) Weight: 0.10lbs Center Electrode Core Material: Copper Center Electrode Design: Fine Wire Center Electrode Tip Material: Iridium Drive Size: 5/8 in Electrical Terminal Type: Non-Removable Nut Gap - Factory... MSRP: Was: Now: $75.95 Add to Cart
Genuine GM LS9 Head Gasket Genuine GM LS9 Head Gasket Price is each you will need 2 These are the gaskets we use on Turbocharged, Supercharged and Nitrous applications. The LS9 gaskets feature a 7-layer MLS construction that can used an anything up to a 4.100" Bore. These... MSRP: Was: Now: $71.99 Add to Cart
Baro Breakout Harness for Gen V DSX BARO Breakout Harness for Gen V The DSX Baro Breakout Harness breaks out the barometric pressure sensor, which allows the calibrator to restore proper calculations in the ECM for pressure ratio on boosted applications. The 3 bar MAP sensor is not... MSRP: Was: Now: $69.99 Choose Options
Lingenfelter Supercharger Isolator Coupling LS9 LSA Engine 2009-2014 Lingenfelter Supercharger Isolator Coupling LS9 LSA Engine 2009-2014 Lingenfelter Supercharger Isolator Coupling LS9 LSA Engine 2009-2014 MSRP: Was: Now: $69.99 Add to Cart
Polished DMS Billet Center Cap for Weld Wheels 31mm Height Polished DMS Billet Center Cap for Weld Wheels 31mm Height Clean up the look look of your weld wheels with this new center cap option from Dedicated Motorsports. These caps are cnc machined from 6061 aluminum and anodized to match the weld wheel color... MSRP: Was: Now: $69.99 - $79.99 Choose Options
Polished DMS Billet Center Cap for Weld Wheels 36mm Height Polished DMS Billet Center Cap for Weld Wheels 36mm Height Clean up the look look of your weld wheels with this new center cap option from Dedicated Motorsports. These caps are cnc machined from 6061 aluminum and anodized to match the weld wheel color... MSRP: Was: Now: $69.99 - $79.99 Choose Options
GM Continental Flex Fuel Sensor GM Continental Flex Fuel Sensor This is an OEM flex fuel sensor from GM. This sensor can be added to most GM vehicles with the proper associated wiring. MSRP: Was: Now: $64.99 Add to Cart
Griptec MKII 10 Bolt Supercharger hub for LSA Griptec MKII 10 Bolt Supercharger hub for LSA The ZPE MKII hub is designed to allow for the smallest pulleys possible on factory GM vehicles. With a OD of 1.86" pulley sizes under 2.15 are possible. We machine our hubs to be within +_ 0.00015 on... MSRP: Was: Now: $64.99 Add to Cart
Lingenfelter LSA and LS9 10 bolt Supercharger Pulley Hub Lingenfelter LSA and LS9 10 bolt Supercharger Pulley Hub DescriptionBorn from the speed team that built the first Comp car to break the 6-second quarter-mile, these Lingenfelter Performance Engineering supercharger hubs give you the power to... MSRP: Was: Now: $64.95 Add to Cart
GM Intake Air Temp Sensor GM Intake Air Temp Sensor This intake air temp sensor is commonly found on the LSA and LS9 supercharger lids but is also frequently used on custom projects or swap vehicles. GM part number 12614717. We also offer an aluminum weld on bung threaded... MSRP: Was: Now: $62.99 Choose Options
GM 3 Bar Map Sensor LSA-LS9 (BLUE) GM 3 Bar Map Sensor LSA-LS9 (BLUE) This map sensor is commonly found on the LSA and LS9 supercharged vehicles but is also a popular upgrade for other platforms. This is the Mexican made sensor part number 55567257 Blue label. MSRP: Was: Now: $58.99 Add to Cart
DMS Auxiliary Fuel Pump Kit Optional Drill & Tap DMS Auxiliary Fuel Pump Kit Optional Drill & Tap Need to purchase the correct drill and tap kit for the DSX Auxiliary Fuel Pump Kit for your ZL1, CTS-V, or C6/Z06 Corvette? Look no further! This kit is the only recommended kit that includes both the... MSRP: Was: Now: $50.00 Add to Cart
DMS Billet Center Cap for Weld Wheels 31mm Height DMS Billet Center Cap for Weld Wheels 31mm Height Clean up the look look of your weld wheels with this new center cap option from Dedicated Motorsports. These caps are cnc machined from 6061 aluminum and anodized to match the weld wheel color. These caps... MSRP: Was: Now: $49.99 - $59.99 Choose Options
DMS Billet Center Cap for Weld Wheels 36mm Height DMS Billet Center Cap for Weld Wheels 36mm Height Clean up the look look of your weld wheels with this new center cap option from Dedicated Motorsports. These caps are cnc machined from 6061 aluminum and anodized to match the weld wheel color (non faded)... MSRP: Was: Now: $49.99 - $59.99 Choose Options
LSA Supercharger Intake Gaskets LSA Supercharger Intake Gaskets OEM Replacement gaskets. Two per set. Includes new rivets MSRP: Was: Now: $46.99 Add to Cart
Fuelab 6 micron / Micro-Fiberglass 3" Replacement Element Fuelab 6 micron / Micro-Fiberglass 3" Replacement Element 6 micron / Micro-Fiberglass Element - Our most advanced filter element provides extra particle protection and reduces maintenance requirements with improvements in filter efficiency. This... MSRP: Was: Now: $45.99 Add to Cart
DMS Billet Y-Fitting 1.00*3/4*3/4 DMS Billet Y-Fitting – 1.00" x 3/4" x 3/4" Say goodbye to cracked plastic Y-fittings. The Dedicated Motorsports Billet Y-Fitting offers a high-strength, long-lasting solution for your cooling or fluid routing setup. Precision-machined from 6061... MSRP: Was: Now: $44.99 Choose Options
DMS Billet Y-Fitting 3/4*3/4*3/4 DMS Billet Y-Fitting 3/4*3/4*3/4 Tired of plastic fittings breaking after a couple month of use? Dedicated Motorsports has a solution for you. These billet 3/4 inch Y-fittings are made from billet 6061 aluminum and anodized black for... MSRP: Was: Now: $44.99 Choose Options
ARP GM LS1/LS2/LS3/LS6/LSA 5.7L/6.0L Wet Sump LT4 Balancer Bolt Kit ARP GM LS1/LS2/LS3/LS6/LSA 5.7L/6.0L and Wet sump LT4 Balancer Bolt Kit Chevrolet Gen III/IV LS Series small block (except LS7)Kit #: 234-2503Specifications:UHL: 4.325˝Thread Size: M16 x 2.00Wrenching: 1-1/16˝Washer Included: Yes MSRP: Was: Now: $39.99 Add to Cart
DMS Remote Mount GM 3 Bar Map Sensor DMS Remote Mount GM 3 Bar Map Sensor The DMS billet remote mount GM map sensor fitting is perfect for any engine with aftermarket intake manifolds lacking OEM map sensor provisions. The flange is designed for all Gen 4 or Gen 5 three wire sensors... MSRP: Was: Now: $38.99 Choose Options
GM 1/8 NPT Map Sensor Adapter GM 1/8 NPT Map Sensor Adapter DMS 1/8" NPT MAP Sensor Adapter for GM LS Engines Introducing the DMS 1/8" NPT MAP Sensor Adapter, a versatile solution for expanding your GM LS engine's monitoring capabilities. This adapter allows you to easily tap into... MSRP: Was: Now: $38.99 Choose Options
6L80/6L90/8L90/10L90 Transmission Cooler Line Adapter 6L80/6L90/8L90/10L90 Transmission Cooler Line Adapter The DMS line adapter bolts onto any 6L80/6L90/8L90/10L90 and makes connecting aftermarket or custom transmission lines a breeze. Choose from either -6an or -8an depending on your application... MSRP: Was: Now: $36.99 Choose Options
LS Valve Cover Gaskets (Pair) LS Valve Cover Gaskets (Pair) This is a pair of genuine GM valve cover gaskets for LS valve covers. MSRP: Was: Now: $35.99 Add to Cart
LT4 Valley Plug LT4 Valley Plug This billet plug is designed to block the passage from the valley cover plate to the inlet of the supercharger. This is where oil is literally sucked straight out of the engine and deposited on the intercooler bricks thus reducing... MSRP: Was: Now: $35.00 Add to Cart
Combo Corvette, CTS-V and Camaro LT4 SC Coolant Filler Adapter Tool Combo Corvette, CTS-V and Camaro LT4 SC Coolant Filler Adapter Tool Now made out of billet aluminum! Lets face it, the coolant filling system found on the LT4 supercharged C7 Corvette, Camaro ZL1 and CTS-V can be a real pain in the butt to fill... MSRP: Was: Now: $34.99 Add to Cart
Lingenfelter 160 Degree Thermostat Lingenfelter 160 Degree Thermostat Enhance your engine's performance and longevity with the Lingenfelter 160 Degree Thermostat. This premium-quality thermostat is designed for a wide range of General Motors applications, offering a direct, drop-in... MSRP: Was: Now: $32.99 Add to Cart
LSA Gates HD Green Belts LSA Gates HD Green Belts Increased strength and accuracy for all LSA applications. A good investment for any level of build to gain more reliability and durability. Use the pulley chart to find the proper fitment for your application. MSRP: Was: Now: $32.99 Choose Options
ATI Supercharger Pulley 6 bolt mod kit ATI Supercharger Pulley 6 bolt mod kit Let's face it, the evolution of the 2650 blowers is starting to push the limits of your typical LSA components. The lower pulley ring is one of these items subject to failure. After Rick Crawford posted about... MSRP: Was: Now: $29.99 Add to Cart
LSA/LT4 Snout Block Off Plates LSA/LT4 Snout Block Off Plates Clean up the front of your LSA or LT4 supercharger with these snout block off plates from Dedicated Motorsports. Each piece is machined from 6061 aluminum and anodized black. Countersink hardware and o-rings are included... MSRP: Was: Now: $29.99 Add to Cart
Nord-lock Suspension Locking Washers Nord-lock Suspension Locking washes The Nord-Lock washers are a great solution to a well known issue on the Cadillac CTS-V. All too commonly the front lower control arm bolts will loosen up and start wearing out the aluminum subframe. If not caught soon... MSRP: Was: Now: $29.99 Add to Cart
DMS Catch Can Billet Clamp DMS Catch Can Billet Clamp This clamp is designed to hold the DMS round catch can. It has 2 M6x1.00 Threaded holes for attaching to a bracket or panel. Hardware is included. MSRP: Was: Now: $28.99 Add to Cart
3/4 Inch Billet Tee Fitting 3/4 Inch Billet Tee Fitting The DMS 3/4 inch tee fittings is machined out of a solid piece of 6061 aluminum and anodized to prevent corrosion. These are a great way to tee off coolant lines on cooling systems with multiple intercoolers and are a more... MSRP: Was: Now: $26.99 Choose Options
5/8 Inch Billet Tee Fitting 5/8 Inch Billet Tee Fitting The DMS 5/8 inch tee fittings is machined out of a solid piece of 6061 aluminum and anodized to prevent corrosion. These are a great way to tee off coolant lines on cooling systems with multiple intercoolers and are a more... MSRP: Was: Now: $26.99 Choose Options
MAF Weld Flange Bung for 2009-2014 LS Mass Air Flow Sensor Mount Billet Weldable Mass Air Flow Sensor Mounting Flange Compatible with all 2009-2014 GM Truck/SUV Sensors (any engine, any model) Made in Wichita, Kansas from aerospace grade, USA produced, 6061-T6 billet aluminum Includes 1 weld bung and 2 bolts Radius... MSRP: Was: Now: $26.99 Add to Cart
-12an Quick Connect Adapter GM LSA, LS9, LT4, LT5 -12an Quick Connect Adapter GM LSA, LS9, LT4, LT5 This fitting is designed to adapt the GM 5/8 Quick connect found on most GM supercharger coolant lines to a more common -12an male fitting. Allowing the use of a larger diameter hose and endless... MSRP: Was: Now: $24.99 Choose Options
Gen V Cam Phaser Block Gen V Cam Phaser Limiter Block When installing a camshaft on any Gen V engine it is incredibly important to make sure you install a cam phaser limiter block. Engine damage will occure if this step is missed. MSRP: Was: Now: $24.99 Add to Cart
DMS -16AN 120 Degree Pushlock Fitting DMS -16AN 120 Degree Pushlock Fitting These fittings are specifically designed for applications with a tight fit. We call these full flow because they are forged and have a constant inside diameter through the bend radius. Designed to be used with... MSRP: Was: Now: $24.00 Add to Cart
DMS -16AN 90 Degree Pushlock Fitting DMS -16AN 90 Degree Pushlock Fitting These fittings are specifically designed for applications with a tight fit. We call these full flow because they are forged and have a constant inside diameter through the bend radius. Designed to be used with... MSRP: Was: Now: $24.00 Add to Cart
LS3 MAF Mass Air Flow Sensor Weld Bung (for LS Custom Intake Tube) Mass Air Flow Mounting Flange Compatible with LS3,LS7, VW, and all GM LT series engines 2014 and newer (see below) Radius cut on bottom to accept 4" pipe (can be used with 2.5"-5" pipe with more weld) Made in Wichita, Kansas from 6061-T6, USA produced,... MSRP: Was: Now: $23.99 Add to Cart
-12an Low Profile 90-degree Swivel Hose End (Black) -12an Low Profile 90-degree Swivel Hose End (Black) These -12an 90 degree hose ends are designed for applications where space in front of the fitting are tight but the system demands high flow. We call these full flow because they are forged and have a... MSRP: Was: Now: $22.99 Add to Cart
Brick Insulator Supercharger Intercooler Brick Gasket OEM insulator/gasket for the intercooler brick located inside the supercharger lid. MSRP: Was: Now: $22.95 Add to Cart
