null

Dedicated Motorsports

150 of 176 Items
  • 10 Rib Tensioner Pulley 10 Rib Tensioner Pulley

    10 Rib Tensioner Pulley

    10 Rib Tensioner Pulley   LSA 10 Rib Grooved Tensioner Pulley and idler spacers. For use with 10 rib systems utilizing the CTS-V or ZL1 oem tensioner     Note: OEM bolt is left hand thread.    Due to the nature of these 10 rib...

    $89.99
    Add to Cart
  • DMS 50mm Supercharger Idler Pulley DMS 50mm Supercharger Idler Pulley DMS 50mm Supercharger Idler Pulley

    DMS 50mm Supercharger Idler Pulley

    DMS 50mm Supercharger Idler Pulley While the 50mm pulley is not the most ideal due to how tough the high RPM can be on bearings, there are times the 50mm is absolutely necessary. Commonly used to help achieve a certain belt length on the 09-13 ZR1...

    $89.99
    Add to Cart
  • DMS Wide LT4 Tensioner Pulley DMS Wide LT4 Tensioner Pulley DMS Wide LT4 Tensioner Pulley

    DMS Wide LT4 Tensioner Pulley

    DMS Wide LT4 Tensioner Pulley   Dedicated Motorsports brings you a solution to a not so well known issue. Chances are you may have experienced this issue if you've heard a squeaking/chirping noise from your LT4 supercharger belt or maybe you lost a...

    $89.99
    Add to Cart
  • DMS 100mm LSA LS9 Supercharger Idler Pulley

    DMS 100mm LSA LS9 Supercharger Idler Pulley

    DMS 100mm LSA LS9 Supercharger Idler Pulley When reducing the diameter of the upper pulley it is common to replace the factory 90mm idler with a 100m version to help increase belt wrap. These pulleys are made out of 6061 billet, anodized black and comes...

    $84.99
    Add to Cart
  • DMS 76mm LSA LS9 Supercharger Idler Pulley DMS 76mm LSA LS9 Supercharger Idler Pulley DMS 76mm LSA LS9 Supercharger Idler Pulley

    DMS 76mm LSA LS9 Supercharger Idler Pulley

    DMS 76mm LSA LS9 Supercharger Idler Pulley The DMS 76mm idler pulley is commonly used on the LS9 belt system to help establish the proper belt length/tension. These pulleys are made out of 6061 billet aluminum, anodized black and comes standard with a...

    $84.99
    Add to Cart
  • KRX 1000 Billet Center Caps (set of 4) KRX 1000 Billet Center Caps (set of 4) KRX 1000 Billet Center Caps (set of 4) KRX 1000 Billet Center Caps (set of 4) KRX 1000 Billet Center Caps (set of 4)

    KRX 1000 Billet Center Caps (set of 4)

    KRX 1000 Billet Center Caps (set of 4)   Its a well known issue that the KRX center caps tend to fall off with the slightest gust of wind. That problem is a thing of the past with these billet center caps from Dedicated Motorsports. Each cap is CNC...

    $79.99 - $104.99
    Choose Options
  • RED Anodized KRX 1000 Billet Center Caps (set of 4) RED Anodized KRX 1000 Billet Center Caps (set of 4) RED Anodized KRX 1000 Billet Center Caps (set of 4) RED Anodized KRX 1000 Billet Center Caps (set of 4)

    RED Anodized KRX 1000 Billet Center Caps (set of 4)

    RED Anodized KRX 1000 Billet Center Caps (set of 4)   Its a well known issue that the KRX center caps tend to fall off with the slightest gust of wind. That problem is a thing of the past with these billet center caps from Dedicated Motorsports...

    $79.99 - $104.99
    Choose Options
  • DMS LSA +5mm Idler Relocation Bracket

    DMS LSA +5mm Idler Relocation Bracket

    DMS LSA +5mm Idler Relocation Bracket This bracket is required when using a 9.17" or larger diameter lower crank pulley. The relo bracket is designed to move the factory lower idler to clear the larger crankshaft pulleys. DMS has taken it a step futher...

    $74.99
    Add to Cart
  • 4" Aluminum Donut 3/4:1 Radius

    4" Aluminum Donut 3/4:1 Radius

    4" Aluminum Donut 3/4:1 Radius     DescriptionThe 4" Aluminum Donut is perfect for custom exhaust systems or fabrication for intake manifolds needed in tight bends and corners. This donut can be cut at any degree of bend needed. The donut is...

    $52.99
    Add to Cart
  • DMS Auxiliary Fuel Pump Kit Optional Drill & Tap

    DMS Auxiliary Fuel Pump Kit Optional Drill & Tap

    DMS Auxiliary Fuel Pump Kit Optional Drill & Tap Need to purchase the correct drill and tap kit for the DSX Auxiliary Fuel Pump Kit for your ZL1, CTS-V, or C6/Z06 Corvette? Look no further! This kit is the only recommended kit that includes both the...

    $50.00
    Add to Cart
  • DMS Billet Center Cap for Weld Wheels 31mm Height DMS Billet Center Cap for Weld Wheels 31mm Height DMS Billet Center Cap for Weld Wheels 31mm Height DMS Billet Center Cap for Weld Wheels 31mm Height DMS Billet Center Cap for Weld Wheels 31mm Height

    DMS Billet Center Cap for Weld Wheels 31mm Height

    DMS Billet Center Cap for Weld Wheels 31mm Height Clean up the look look of your weld wheels with this new center cap option from Dedicated Motorsports. These caps are cnc machined from 6061 aluminum and anodized to match the weld wheel color. These caps...

    $49.99 - $74.99
    Choose Options
  • DMS Billet Center Cap for Weld Wheels 36mm Height DMS Billet Center Cap for Weld Wheels 36mm Height DMS Billet Center Cap for Weld Wheels 36mm Height DMS Billet Center Cap for Weld Wheels 36mm Height DMS Billet Center Cap for Weld Wheels 36mm Height

    DMS Billet Center Cap for Weld Wheels 36mm Height

    DMS Billet Center Cap for Weld Wheels 36mm Height Clean up the look look of your weld wheels with this new center cap option from Dedicated Motorsports. These caps are cnc machined from 6061 aluminum and anodized to match the weld wheel color (non faded)...

    $49.99 - $74.99
    Choose Options
  • 3.5" Aluminum Donut

    3.5" Aluminum Donut

    3.5" Aluminum Donut 3/4:1 Radius     DescriptionThe 3.5" Aluminum Donut is perfect for custom exhaust systems or fabrication for intake manifolds needed in tight bends and corners. This donut can be cut at any degree of bend needed. The donut...

    $47.99
    Add to Cart
  • Can Am Cargo Hooks Can Am Cargo Hooks Can Am Cargo Hooks Can Am Cargo Hooks Can Am Cargo Hooks

    Can Am Cargo Hooks

    Can Am Cargo Hooks   If you’re looking for a solid strapping point for your loose cargo, look no further. The DMS billet cargo hooks are designed to spread the load across the plastic hook holes on the Cam Am bed. These cargo hooks are cnc...

    $44.99
    Add to Cart
  • DMS Billet Y-Fitting 1.00*3/4*3/4 DMS Billet Y-Fitting 1.00*3/4*3/4 DMS Billet Y-Fitting 1.00*3/4*3/4

    DMS Billet Y-Fitting 1.00*3/4*3/4

    DMS Billet Y-Fitting 1.00*3/4*3/4   Tired of plastic fittings breaking after a couple month of use? Dedicated Motorsports has a solution for you. These billet 3/4 inch to 1.00" y-fittings are made from billet 6061 aluminum and anodized black for...

    $44.99
    Choose Options
  • DMS Billet Y-Fitting 3/4*3/4*3/4 DMS Billet Y-Fitting 3/4*3/4*3/4 DMS Billet Y-Fitting 3/4*3/4*3/4

    DMS Billet Y-Fitting 3/4*3/4*3/4

    DMS Billet Y-Fitting 3/4*3/4*3/4     Tired of plastic fittings breaking after a couple month of use? Dedicated Motorsports has a solution for you. These billet 3/4 inch y-fittings are made from billet 6061 aluminum and anodized black for...

    $44.99
    Choose Options
  • 3" Aluminum Donut 3/4:1 Radius

    3" Aluminum Donut 3/4:1 Radius

    3" Aluminum Donut 3/4:1 Radius     DescriptionThe 3" Aluminum Donut is perfect for custom exhaust systems or fabrication for intake manifolds needed in tight bends and corners. This donut can be cut at any degree of bend needed. The donut is...

    $42.99
    Add to Cart
  • KRX 1000 Shifter Gate Surround KRX 1000 Shifter Gate Surround KRX 1000 Shifter Gate Surround

    KRX 1000 Shifter Gate Surround

    KRX Shifter Gate Surround   The DMS shifter gate is designed to give you quick access between low gear and reverse for an extra layer of safety when climbing steep inclines or anything sketchy. These are CNC cut out of 6061 aluminum and anodized...

    $42.99
    Add to Cart
  • DMS "Stay Dedicated" Hoodie DMS "Stay Dedicated" Hoodie DMS "Stay Dedicated" Hoodie

    DMS "Stay Dedicated" Hoodie

    DMS "Stay Dedicated" Hoodie   A proven winner improved with an updated fit, beefier rib knit details and a three-panel hood. It's also colorfast and resists shrinkage. 9-ounce, 65/35 ring spun combed cotton/poly fleece Twill-taped...

    $40.00
    Choose Options
  • 2.5" Aluminum Donut

    2.5" Aluminum Donut

    2.5" Aluminum Donut 3/4:1 Radius   DescriptionThe 2.5" Aluminum Donut is perfect for custom exhaust systems or fabrication for intake manifolds needed in tight bends and corners. This donut can be cut at any degree of bend needed. The donut is often...

    $39.99
    Add to Cart
  • DMS Remote Mount GM 3 Bar Map Sensor DMS Remote Mount GM 3 Bar Map Sensor DMS Remote Mount GM 3 Bar Map Sensor

    DMS Remote Mount GM 3 Bar Map Sensor

    DMS Remote Mount GM 3 Bar Map Sensor   The DMS billet remote mount GM map sensor fitting is perfect for any engine with aftermarket intake manifolds lacking OEM map sensor provisions. The flange is designed for all Gen 4 or Gen 5 three wire sensors...

    $38.99
    Add to Cart
  • GM 1/8 NPT Map Sensor Adapter GM 1/8 NPT Map Sensor Adapter GM 1/8 NPT Map Sensor Adapter

    GM 1/8 NPT Map Sensor Adapter

    GM 1/8 NPT Map Sensor Adapter Dedicated Motorsports brings you another innovative product. This adapter effectively tee's into the manifold pressure source on any LS3, LSA or LS9 style map sensor. Allowing you to add a higher range map sensor for logging...

    $38.99
    Add to Cart
  • Sale
    ZR1 EMP Pump Bracket ZR1 EMP Pump Bracket ZR1 EMP Pump Bracket ZR1 EMP Pump Bracket ZR1 EMP Pump Bracket

    ZR1 EMP Pump Bracket

    ZR1 EMP Pump Bracket This bracket is designed to mount an EMP coolant pump near the factory coolant pump location for the C6 ZR1. The bracket is CNC machined out of a single piece of 6061 billet aluminum and anodized black. Four M8X1.25 countersink bolts...

    Was: $49.99
    Now: $37.99
    Add to Cart
  • .750 Inch Flush Mount 90 Degree Hose barb .750 Inch Flush Mount 90 Degree Hose barb .750 Inch Flush Mount 90 Degree Hose barb .750 Inch Flush Mount 90 Degree Hose barb .750 Inch Flush Mount 90 Degree Hose barb

    .750 Inch Flush Mount 90 Degree Hose barb

    .750 Inch Flush Mount 90 Degree Hose Barb This weld on bung is designed for tight spaces where a .750 hose barb is needed with as little protrusion as possible.  Typically used in supercharger cooling systems where high flow is a necessity these 90...

    $34.99
    Add to Cart
  • 2" Aluminum Donut Tight Radius

    2" Aluminum Donut Tight Radius

    2" Aluminum Donut Tight Radius   Description: The 2" Aluminum Donut is perfect for custom exhaust systems or fabrication for intake manifolds needed in tight bends and corners. This donut can be cut at any degree of bend needed. The donut is often...

    $32.99
    Out of stock
  • KRX 1000 Billet Aluminum Recovery Point "tow hook" KRX 1000 Billet Aluminum Recovery Point "tow hook"

    KRX 1000 Billet Aluminum Recovery Point "tow hook"

    KRX 1000 Billet Aluminum Recovery Point "tow hook"   These recovery points are cnc machined out of solid billet aluminum with radiused corners for soft shackles or straps. These will save your butt or your friends in a recovery scenario.  Comes...

    $29.99
    Add to Cart
  • LSA/LT4 Snout Block Off Plates LSA/LT4 Snout Block Off Plates

    LSA/LT4 Snout Block Off Plates

    LSA/LT4 Snout Block Off Plates Clean up the front of your LSA or LT4 supercharger with these snout block off plates from Dedicated Motorsports. Each piece is machined from 6061 aluminum and anodized black. Countersink hardware and o-rings are included...

    $29.99
    Add to Cart
  • DMS Catch Can Billet Clamp DMS Catch Can Billet Clamp

    DMS Catch Can Billet Clamp

    DMS Catch Can Billet Clamp   This clamp is designed to hold the DMS round catch can. It has 2 M6x1.00 Threaded holes for attaching to a bracket or panel. Hardware is included.   

    $28.99
    Add to Cart
  • 3/4 Inch Billet Tee Fitting 3/4 Inch Billet Tee Fitting 3/4 Inch Billet Tee Fitting 3/4 Inch Billet Tee Fitting

    3/4 Inch Billet Tee Fitting

    3/4 Inch Billet Tee Fitting The DMS 3/4 inch tee fittings is machined out of a solid piece of 6061 aluminum and anodized to prevent corrosion. These are a great way to tee off coolant lines on cooling systems with multiple intercoolers and are a more...

    $26.99
    Choose Options
  • DMS Flex Fit Hat DMS Flex Fit Hat DMS Flex Fit Hat

    DMS Flex Fit Hat

    DMS Flex Fit Hat (Black) 63/34/3 Polyester/Cotton/Spandex Twill Structured, mid-profile, six-panel, 3 1/2" crown Permacurv visor with silver undervisor Sewn eyelets S/M (6 3/4"-7 1/4"), L/XL (7 1/8"-7 5/8")

    $25.00
    Choose Options
  • -12an Quick Connect Adapter GM LSA, LS9, LT4, LT5 -12an Quick Connect Adapter GM LSA, LS9, LT4, LT5

    -12an Quick Connect Adapter GM LSA, LS9, LT4, LT5

    -12an Quick Connect Adapter GM LSA, LS9, LT4, LT5 This fitting is designed to adapt the GM 5/8 Quick connect found on most GM supercharger coolant lines to a more common -12an male fitting. Allowing the use of a larger diameter hose and endless...

    $24.99
    Choose Options
  • Gen V Cam Phaser Block Gen V Cam Phaser Block

    Gen V Cam Phaser Block

    Gen V Cam Phaser Limiter Block When installing a camshaft on any Gen V engine it is incredibly important to make sure you install a cam phaser limiter block. Engine damage will occure if this step is missed. 

    $24.99
    Add to Cart
  • DMS -16AN 120 Degree Pushlock Fitting

    DMS -16AN 120 Degree Pushlock Fitting

    DMS -16AN 120 Degree Pushlock Fitting  These fittings are specifically designed for applications with a tight fit. We call these full flow because they are forged and have a constant inside diameter through the bend radius. Designed to be used with...

    $24.00
    Add to Cart
  • DMS -16AN 90 Degree Pushlock Fitting

    DMS -16AN 90 Degree Pushlock Fitting

    DMS -16AN 90 Degree Pushlock Fitting  These fittings are specifically designed for applications with a tight fit. We call these full flow because they are forged and have a constant inside diameter through the bend radius. Designed to be used with...

    $24.00
    Add to Cart
  • DMS Richardson Hat - Heather Gray/ Black DMS Richardson Hat - Heather Gray/ Black DMS Richardson Hat - Heather Gray/ Black

    DMS Richardson Hat - Heather Gray/ Black

    DMS Richardson 112 Hat Heather Gray/ Black Classic trucker cap style built with the Richardson quality and fit you’ve come to expect.   SHAPE-  MidPro FABRIC- Cotton-Poly/Nylon Mesh VISOR- Precurved SWEATBAND- Cotton   FIT &...

    $23.00
    Add to Cart
  • -12an Low Profile 90-degree Swivel Hose End (Black) -12an Low Profile 90-degree Swivel Hose End (Black) -12an Low Profile 90-degree Swivel Hose End (Black) -12an Low Profile 90-degree Swivel Hose End (Black)

    -12an Low Profile 90-degree Swivel Hose End (Black)

    -12an Low Profile 90-degree Swivel Hose End (Black) These -12an 90 degree hose ends are designed for applications where space in front of the fitting are tight but the system demands high flow. We call these full flow because they are forged and have a...

    $22.99
    Add to Cart
  • DMS "CTS-V" T-Shirt

    DMS "CTS-V" T-Shirt

    DMS "CTS-V" T-Shirt Description:If you like the 2016+ CTS-V this is the shirt for you. These are printed on Gildan Ultra Cotton shirts. 100% Cotton and preshrunk for a comfortable feel, normal fit and many years of service. Sizes: S, M, L, XL, 2XL,...

    $22.50
    Choose Options
  • DMS "Louie" T-Shirt

    DMS "Louie" T-Shirt

    DMS "Louie" T-Shirt Description:If you've been to DMS, chances are you've been barked at by Matt's dog Louie. We're making a short run of shirts featuring this sweet boy. Get them while you can!  These are printed on Gildan Ultra Cotton shirts...

    $22.50
    Choose Options
  • DMS "OG" T-Shirt

    DMS "OG" T-Shirt

    DMS "OG" T-Shirt Description:We lanched the first version of this shirt in 2015 as a reminder of what it takes to truely be Dedicated. These are printed on Gildan Ultra Cotton shirts. 100% Cotton and preshrunk for a comfortable feel, normal fit and many...

    $22.50
    Choose Options
150 of 176 Items

© 2024 Dedicated Motorsports Solutions Powered by BigCommerce All rights reserved. | Sitemap