Universal 1 Gallon Supercharger Coolant (Ice) tank with Davis Craig Pump MSRP: Was: Now: $239.99 - $465.99 Choose Options
Sale Black DMS Billet Thermostat Housing with LS3 Style 160 Degree Thermostat for all Gen V LT Engines MSRP: Was: $244.99 Now: $214.99 Add to Cart
Sale DMS Billet Thermostat Housing with 160 Degree Thermostat for all Gen V LT Engines MSRP: Was: $224.99 Now: $199.99 Add to Cart
99-07 Chevrolet/GMC Truck & Suv Trans Cooler/ Heat Exchanger Bracket MSRP: Was: Now: $150.00 Choose Options
DMS Lower LSA/LT4 Overdrive pulley for ATI balancers MSRP: Was: Now: $132.99 - $154.99 Choose Options
Fore Innovations LS3 Fuel Rails (LS2, L99, L76, LSXr) Fore Innovations LS3 Fuel Rails (LS2, L99, L76, LSXr) DescriptionFore Innovations billet fuel rails for the LS2, LS3, L76, L99 motors, as well as Fast LSXr 102mm intakes for LS1, LS2, LS3, LS6, LS7, L99, L76. Machined from a solid block of 6061... MSRP: Was: Now: $245.00 Add to Cart
Fore Innovations LS7 Fuel Rails Fore Innovations LS7 Fuel Rails DescriptionFore Innovations billet fuel rails for the LS7. Machined from a solid block of 6061 aluminum. Integrated mounting tabs eliminate rail tab flex under the highest intake and fuel pressures. Proper clearances and... MSRP: Was: Now: $245.00 Add to Cart
Hawk DTC-60 Rear Brake Pads Hawk DTC-60 Rear Brake Pads Hawk Performance’s DTC-60 brake pad compound is ideal for Track Day drivers looking for a high performance race compound that can take the heat of the track and get you home safely without having to change the pads... MSRP: Was: Now: $239.99 Add to Cart
Universal 1 Gallon Supercharger Coolant (Ice) tank with Davis Craig Pump Universal 1 Gallon Supercharger Coolant (Ice) Tank with Davis Craig Pump This universal coolant tank is a great way to add 1 gallon of coolant to your air to water intercooler system. While these are most used with supercharged setups, it could... MSRP: Was: Now: $239.99 - $465.99 Choose Options
LT4 Pulley & Hub 2.30" Black Griptec V2 LT4 Pulley & Hub 2.30" Black Griptec V2 Product DescriptionThis Ultra Lightweight Pulley Upgrade for ZPE Pulley Hub system. (No machining of the snout needed) Fits factory GM LT4, this 10 Bolt Pulley is designed to be paired with our ZPE MK II... MSRP: Was: Now: $228.00 Add to Cart
DMS Flying Lead Harness for 2001 Lexus IS300 DMS Flying Lead Harness for 2001 Lexus IS300 Let's face it...there aren't many people who enjoy wiring. more often than not, this is the largest most daunting hurdle of the entire project. The DMS flying lead harness is designed to trigger the OEM Lexus... MSRP: Was: Now: $220.00 Add to Cart
DB-Blue Gauge / LC-2 Kit DB-Blue Gauge / LC-2 Kit This kit comes complete with the patented award-winning LC-2 Wideband Controller, DB-Blue Gauge, Bosch LSU 4.9 Wideband O2 Sensor, 8ft Sensor Cable, Bung, Serial Cable, and Manual. MSRP: Was: Now: $219.00 Add to Cart
LSA Pulley and MKII Hub LSA Pulley and MKII Hub Ultra Lightweight Pulley and ZPE Pulley Hub system. Factory GM LSA/TVS, 10 Bolt Pulley W/ ZPE MK II HUB. The Pulley is made from billet 7075-T6 aerospace grade aluminum. Stronger and harder than 6061 T6. This pulley is... MSRP: Was: Now: $218.00 Choose Options
Sale Black DMS Billet Thermostat Housing with LS3 Style 160 Degree Thermostat for all Gen V LT Engines BLACK Anodized DMS Billet Thermostat Housing with LS3 Style 160 Degree Thermostat for All Gen V LT Engines Dedicated Motorsports brings you a bolt on replacement for the OEM plastic thermostat housing found on all Gen V LT motors. This plastic... MSRP: Was: $244.99 Now: $214.99 Add to Cart
Hawk Performance Brake Pads Front Hawk Performance Brake Pads Front High Performance Street 5.0 Brake Pads; w/ 0.770 ThicknessFor years, engine builders have been pushing motors to the limits of their ability, and at Hawk Performance, we're closer than ever to pushing the ABS Rev Limiter... MSRP: Was: Now: $213.89 Add to Cart
DSX LT4/LT5 Upper Idler Bracket System DSX LT4/LT5 Upper Idler Bracket System This is for the LT4/LT5 enthusiasts who have wanted extra upper pulley wrap. These brackets are unique to the Camaro/V3 application vs C7.Designed, programmed, and cut 100% under our own roof.The first photo... MSRP: Was: Now: $200.00 Choose Options
Sale DMS Billet Thermostat Housing with 160 Degree Thermostat for all Gen V LT Engines DMS Billet Thermostat Housing with LS3 Style 160 Degree Thermostat for All Gen V LT Engines Dedicated Motorsports brings you a bolt on replacement for the OEM plastic thermostat housing found on all Gen V LT motors. This plastic housing is prone to... MSRP: Was: $224.99 Now: $199.99 Add to Cart
DSX Flex Fuel Kit w/ Custom Harness DSX Flex Fuel Kit w/ Custom Harness The DSX Universal Flex Fuel Kit offers a true Plug & Play solution which will allow you to convert your 4th gen GM vehicle to use E85 / ethanol based fuels (any blend from 0% to 100%) and unlock the... MSRP: Was: Now: $199.99 Choose Options
Fuelab 6 Micron Microfiberglass 5" Fuel Filter (E85) Fuelab 6 Micron Microfiberglass 5" Fuel Filter (E85) Choice of -6AN, -8AN, -10AN or -12AN inlet/outlet Fuelab filter with long (5 inch) 6 micron / Micro-Fiberglass Element - Our most advanced filter element provides extra particle protection and... MSRP: Was: Now: $192.99 Choose Options
DMS -10an High Flow Billet Catch Can DMS -10an High Flow Billet Catch Can The DMS catch can is engineered to utilize air velocity developed by crankcase pressure to aid in separating oil droplets from this crankcase air. As the air/oil mixture enters the DMS can its forced into a circular... MSRP: Was: Now: $179.99 Choose Options
Fuelab 6 Micron Microfiberglass 3" Fuel Filter (E85) Fuelab 6 Micron Microfiberglass 3" Fuel Filter (E85) Choice of -6AN, -8AN, -10AN or -12AN inlet/outlet Fuelab filter with long (3 inch) 6 micron / Micro-Fiberglass Element - Our most advanced filter element provides extra particle protection and... MSRP: Was: Now: $169.99 Choose Options
ARP Gen 4 Head Bolt Kit ARP Gen 4 Head Bolt Kit Head Bolt Kit:Chevrolet Small Block, 2004 & later, with all same length bolts, hexKit #: 134-3610Kit Instructions MSRP: Was: Now: $161.01 Add to Cart
DMS +5mm Relocation Bracket and 100mm Idler Pulley DMS +5mm Relocation Bracket and 100mm Idler PulleyThe days of slipping belts is a thing of the past with the addition of the DMS belt wrap combo. This combo moves the belt +5mm closer to the upper pulley to aid in belt wrap for those running an... MSRP: Was: Now: $159.99 Add to Cart
Z-Industries Griptec MKII Pulley- NO HUB Z-Industries Griptec MKII Pulley NO HUB This is a replacment 2.30" Griptec Pulley for the LT4 Supercharger. No hub or bolts included. MSRP: Was: Now: $159.99 Choose Options
Hawk Performance Brake Pads Rear Hawk Performance Brake Pads Rear High Performance Street 5.0 Brake Pads; w/ 0.770 ThicknessFor years, engine builders have been pushing motors to the limits of their ability, and at Hawk Performance, we're closer than ever to pushing the ABS Rev Limiter... MSRP: Was: Now: $157.75 Add to Cart
99-07 Chevrolet/GMC Truck & Suv Trans Cooler/ Heat Exchanger Bracket 99-07 Chevrolet/GMC Truck & Suv Trans Cooler/Heat Exchanger Mounting Bracket Need to add a trans cooler and heat exchanger to your GM full size truck/suv? This bracket solves those issues for you. Designed to hold a B&M transmission... MSRP: Was: Now: $150.00 Choose Options
Billet -12 ORB ZL1 Coolant Manifold Billet -12 ORB ZL1 Coolant Manifold For years, the only method for converting the ZL1 inlet/outlet coolant ports to -12an was to machine and weld the factory cast aluminum piece. After proving this process on over 6000 OEM pieces we decided to... MSRP: Was: Now: $149.99 Choose Options
DMS CTS-V -16AN High Flow Billet Water Manifold DMS CTS-V -16AN High Flow Billet Water Manifold The DMS billet 16AN High Flow Billet Water Manifold is a direct replacement for the cast 5/ barb coolant manifold found on the CTS-V LSA supercharger lid. This manifold was designed for high flow systems... MSRP: Was: Now: $149.99 Add to Cart
LS9 ZR1 DMS Blower Blocks LS9 ZR1 DMS Blower Blocks These billet coolant blocks are perfect for guys looking to upgrade the cooling system found on the 2009-2013 ZR1 Corvette with the LS9 supercharger. These blocks are cnc machined out of 6061 aluminum and anodized for... MSRP: Was: Now: $149.99 Choose Options
GM Flex Fuel Sensor with Pigtail GM Flex Fuel Sensor with Pigtail This GM flex fuel sensor measures the ethanol-gasoline ratio of the fuel being used. In order to adjust ignition timing and the fuel quantity to be injected, the engine management system requires information about... MSRP: Was: Now: $149.00 Choose Options
DMS 9.60" C7Z LT4 for ATI Balancer DMS 9.60" C7Z LT4 for ATI Balancer The DMS 9.60" 8 rib balancer pulleys are a great way to increase supercharger RPM resulting in higher airflow and boost levels. These pulleys are CNC machined from 6061 aluminum and anodized for longevity. Designed to... MSRP: Was: Now: $144.99 Add to Cart
DMS 9.20" C7Z LT4 for ATI Balancer 15% OD DMS 9.20" C7Z LT4 for ATI Balancer The DMS 9.20" 8 rib balancer pulleys are a great way to increase supercharger RPM resulting in higher airflow and boost levels. These pulleys are CNC machined from 6061 aluminum and anodized for longevity. Designed to... MSRP: Was: Now: $141.99 Add to Cart
DMS Turbo Oil Scavenge Tank DMS Turbo Oil Scavenge Tank This is the same scavenge tank used in the DMS twin turbo kits. The return bungs from each turbo is a -10an while the "feed" line to the scavenge is a -8an. We also include an 1/8 NPT bung on the top to act as a vent,... MSRP: Was: Now: $139.99 Add to Cart
DMS Lower LSA/LT4 Overdrive pulley for ATI balancers DMS Lower LSA/LT4 Overdrive pulley for ATI balancers If you're looking to extract more horsepower out of your LSA or LT4 supercharger system these DMS overdrive pulleys are the way to go. We've manufactured a range of diameters to help meet your goals... MSRP: Was: Now: $132.99 - $154.99 Choose Options
IAT / Baro Breakout Harness for Gen V DSX IAT/BARO Breakout Harness The DSX IAT/baro Breakout harness allows you to remove the IAT from the MAF assembly on newer vehicles so you can place it closer to the throttle for applications using methanol injection to meet fueling requirements. It... MSRP: Was: Now: $220.00 Choose Options
-10an Low Profile Turbo Drain for GT and Xona Rotor Turbos 10an Low Profile Turbo Drain for GT and Xona Rotor Turbos SOLD AS A PAIR as shown in the photosThe DMS turbo drain fittings are perfect for low mount turbo kits or in any situation where clearnce under the turbo is an issue. These come... MSRP: Was: Now: $99.99 Add to Cart
2016+ CTS-V Line Kit for DMS Fender Expansion Tank 2016+ CTS-V Line Kit for DMS Fender Expansion Tank This is a replacement line kit for the DMS fender tank. V3 Fender Tank Instructions MSRP: Was: Now: $99.99 Add to Cart
DMS 09-15 CTS-V Coupe Passenger Side EMP Pump Mount DMS 09-15 CTS-V Coupe Passenger Side EMP Pump Mount Since the coupes have such a small trunk compartment, it can be challenging to mount an EMP pump and ice box in the same area. DMS designed this bracket to mount the EMP pump under the passenger... MSRP: Was: Now: $99.99 Add to Cart
DMS Defrost Vent Dual Gauge Pod 52mm (2.065") DMS Defrost Vent Dual Gauge Pod 52mm (2.065") This gauge pod is built off the single platform and has a 2nd pod added at 45 degrees to give the user room for that added gauge with out having to sacrifice the clock. The depth of both pods are... MSRP: Was: Now: $99.99 Add to Cart
PNP EMP Pump Harness for Trunk Tank PNP EMP Pump Harness for Trunk Tank This plug and play harness is designed for the Stewart Warner EMP pump using a 4 pin DT connector. Since these pumps have a heavy amp draw we designed this harness with 10 gauge wire and a over sized fuse assembly. The... MSRP: Was: Now: $99.99 Add to Cart
Trick Flow Flywheel Holding Tools for GM LS Trick Flow Flywheel Holding Tools for GM LS DescriptionTorque your harmonic balancer bolt on your LS engine with ease using Trick Flow® flywheel holding tools for GM LS. These specially made tools will hold your crankshaft in place while you... MSRP: Was: Now: $99.97 Add to Cart
DMS CTS-V -12AN Billet Water Manifold DMS CTS-V -12AN Billet Water Manifold Dedicated Motorsports brings you our billet aluminum constructed -12an in/out manifold for your CTS-V Lid, made here in-house. This piece uses factory hardware and O-ring, and is quick and easy to... MSRP: Was: Now: $90.00 Choose Options
10 Rib 70mm Idler Pulley 10 Rib 70mm Idler Pulley This pulley is used in the DMS 10 rib kit and can actually accept an 11 rib belt making it acceptable to run on the LS9 belt drive. However this product is designed to replace the factory lower idler on the LSA drive... MSRP: Was: Now: $89.99 Add to Cart
10 Rib Tensioner Pulley 10 Rib Tensioner Pulley LSA 10 Rib Grooved Tensioner Pulley and idler spacers. For use with 10 rib systems utilizing the CTS-V or ZL1 oem tensioner Note: OEM bolt is left hand thread. Due to the nature of these 10 rib... MSRP: Was: Now: $89.99 Add to Cart
DMS 50mm Supercharger Idler Pulley DMS 50mm Supercharger Idler Pulley While the 50mm pulley is not the most ideal due to how tough the high RPM can be on bearings, there are times the 50mm is absolutely necessary. Commonly used to help achieve a certain belt length on the 09-13 ZR1... MSRP: Was: Now: $89.99 Add to Cart
DMS Wide LT4 Tensioner Pulley DMS Wide LT4 Tensioner Pulley Dedicated Motorsports brings you a solution to a not so well known issue. Chances are you may have experienced this issue if you've heard a squeaking/chirping noise from your LT4 supercharger belt or maybe you lost a... MSRP: Was: Now: $89.99 Add to Cart
DMS 100mm LSA LS9 Supercharger Idler Pulley DMS 100mm LSA LS9 Supercharger Idler Pulley When reducing the diameter of the upper pulley it is common to replace the factory 90mm idler with a 100m version to help increase belt wrap. These pulleys are made out of 6061 billet, anodized black and comes... MSRP: Was: Now: $84.99 Add to Cart
DMS 76mm LSA LS9 Supercharger Idler Pulley DMS 76mm LSA LS9 Supercharger Idler Pulley The DMS 76mm idler pulley is commonly used on the LS9 belt system to help establish the proper belt length/tension. These pulleys are made out of 6061 billet aluminum, anodized black and comes standard with a... MSRP: Was: Now: $84.99 Add to Cart
ACDelco LS9 Plug Wire Set ACDelco LS9 Plug wire set This wire set was originally found on the C6 ZR1 LS9 engine but will fit a number of different engines and is the choice wire set for many DMS builds. (Price is for a set of 8 wires, no metal shields included) MSRP: Was: Now: $81.99 Add to Cart
KRX 1000 Billet Center Caps (set of 4) KRX 1000 Billet Center Caps (set of 4) Its a well known issue that the KRX center caps tend to fall off with the slightest gust of wind. That problem is a thing of the past with these billet center caps from Dedicated Motorsports. Each cap is CNC... MSRP: Was: Now: $79.99 - $104.99 Choose Options
NGK IRIDIUM SPARK PLUGS LTR7IX-11 SET OF (8) NGK IRIDIUM SPARK PLUGS LTR7IX-11 SET OF (8) Weight: 0.14lbs Center Electrode Core Material: Copper Center Electrode Design: Fine Wire Center Electrode Tip Material: Iridium Drive Size: 5/8 in Electrical Terminal... MSRP: Was: Now: $79.99 Add to Cart
RED Anodized KRX 1000 Billet Center Caps (set of 4) RED Anodized KRX 1000 Billet Center Caps (set of 4) Its a well known issue that the KRX center caps tend to fall off with the slightest gust of wind. That problem is a thing of the past with these billet center caps from Dedicated Motorsports... MSRP: Was: Now: $79.99 - $104.99 Choose Options
Green Filter Airaid Replacement Green Filter Airaid Replacement Upgrade your stock Airaid filter with this high flow green filter. Proven to add 15-20hp Filter DimensionsMounting Inside Diameter 6.00 inchesOutside Diameter - Base 7.50 inchesOutside Diameter - Top 4.75 inchesFilter... MSRP: Was: Now: $79.00 Add to Cart
NGK IRIDIUM SPARK PLUGS TR7IX SET OF (8) NGK IRIDIUM SPARK PLUGS TR7IX SET OF (8) Weight: 0.10lbs Center Electrode Core Material: Copper Center Electrode Design: Fine Wire Center Electrode Tip Material: Iridium Drive Size: 5/8 in Electrical Terminal Type: Non-Removable Nut Gap - Factory... MSRP: Was: Now: $75.95 Add to Cart
DMS LSA +5mm Idler Relocation Bracket DMS LSA +5mm Idler Relocation Bracket This bracket is required when using a 9.17" or larger diameter lower crank pulley. The relo bracket is designed to move the factory lower idler to clear the larger crankshaft pulleys. DMS has taken it a step futher... MSRP: Was: Now: $74.99 Add to Cart