DMS Lower LSA/LT4 Overdrive pulley for ATI balancers MSRP: Was: Now: $132.99 - $154.99 Choose Options
Combo Corvette, CTS-V and Camaro LT4 SC Coolant Filler Adapter Tool MSRP: Was: Now: $34.99 Add to Cart
DMS Turbo Oil Scavenge Tank DMS Turbo Oil Scavenge Tank Optimize your turbo system's oil return with the DMS Turbo Oil Scavenge Tank, the same high-performance tank used in our renowned DMS twin turbo kits. This tank is designed to efficiently collect and manage oil return from... MSRP: Was: Now: $139.99 Add to Cart
DMS Lower LSA/LT4 Overdrive pulley for ATI balancers DMS Lower LSA/LT4 Overdrive Pulley for ATI Balancers Maximize the horsepower potential of your LSA or LT4 supercharger system with the DMS Lower Overdrive Pulley. Engineered to fit 918856 and 918854 ATI harmonic balancers, these pulleys offer a range of... MSRP: Was: Now: $132.99 - $154.99 Choose Options
DMS Tune Deposit Customer Deposit for Tuning Appointment Deposit for tuning in-house at DMS. This will hold your place on our schedule. Deposit will be credited toward tuning cost. Non-refundable. If you are not having your car tuned by us, don't buy this! MSRP: Was: Now: $100.00 Choose Options
-10an Low Profile Turbo Drain for GT and Xona Rotor Turbos 10an Low Profile Turbo Drain for GT and Xona Rotor Turbos SOLD AS A PAIR as shown in the photosThe DMS turbo drain fittings are perfect for low mount turbo kits or in any situation where clearnce under the turbo is an issue. These come standard... MSRP: Was: Now: $99.99 Add to Cart
DMS 50mm Supercharger Idler Pulley DMS 50mm Supercharger Idler Pulley – High RPM Billet Design for LS9 & LSA Systems Precision-engineered for high-performance supercharged setups While 50mm idler pulleys are often considered less ideal due to the stress high RPMs place on... MSRP: Was: Now: $99.99 Add to Cart
PNP EMP Pump Harness for Trunk Tank PNP EMP Pump Harness for Trunk Tank This plug and play harness is designed for the Stewart Warner EMP pump using a 4 pin DT connector. Since these pumps have a heavy amp draw we designed this harness with 10 gauge wire and a over sized fuse assembly. The... MSRP: Was: Now: $99.99 Add to Cart
10 Rib 70mm Idler Pulley 10 Rib 70mm Idler Pulley This pulley is used in the DMS 10 rib kit and can actually accept an 11 rib belt making it acceptable to run on the LS9 belt drive. However this product is designed to replace the factory lower idler on the LSA drive... MSRP: Was: Now: $89.99 Add to Cart
10 Rib Tensioner Pulley DMS 10-Rib Tensioner Pulley for LSA Engines Upgrade your LSA 10-rib supercharger system with the DMS 10-Rib Grooved Tensioner Pulley and idler spacers. Designed for use with OEM CTS-V or ZL1 tensioners, this pulley ensures optimal belt tension and... MSRP: Was: Now: $89.99 Add to Cart
DMS 4.5" to 6" Billet Velocity Stack DMS 4.5" to 6" Billet Velocity Stack – CNC Machined Intake Transition Maximize airflow and performance with the DMS Billet Velocity Stack, designed to transition a 4.5” intake tube to a massive 6” air filter inlet with smooth,... MSRP: Was: Now: $89.99 Add to Cart
DMS CTS-V -12AN Billet Water Manifold DMS CTS-V -12AN Billet Water Manifold Dedicated Motorsports brings you our billet aluminum constructed -12an in/out manifold for your CTS-V Lid, made here in-house. This piece uses factory hardware and O-ring, and is quick and easy to... MSRP: Was: Now: $89.99 Choose Options
DMS LSA +5mm Idler Relocation Bracket DMS LSA +5mm Idler Relocation BracketMaximize Belt Wrap for High-Boost LSA Builds When running a larger 9.17" or greater diameter lower crank pulley on your LSA setup, clearance and belt wrap become critical. The Dedicated Motorsports Idler Relocation... MSRP: Was: Now: $89.99 Add to Cart
DMS Wide LT4 Tensioner Pulley DMS Wide LT4 Tensioner Pulley – Fix Belt Walk & Squeal for Good If you’ve noticed belt squeal, chirping, or even found a rib missing on your LT4 supercharger belt, chances are the OEM tensioner pulley is to blame. Dedicated Motorsports... MSRP: Was: Now: $89.99 Add to Cart
DMS 100mm LSA LS9 Supercharger Idler Pulley DMS 100mm LSA/LS9 Supercharger Idler Pulley Maximize belt wrap and ensure consistent boost with the DMS 100mm Supercharger Idler Pulley. Designed for LSA and LS9 supercharger systems, this pulley is a crucial upgrade when using smaller upper pulleys,... MSRP: Was: Now: $84.99 Add to Cart
DMS 76mm LSA LS9 Supercharger Idler Pulley DMS 76mm LSA LS9 Supercharger Idler Pulley The DMS 76mm idler pulley is commonly used on the LS9 belt system to help establish the proper belt length/tension. These pulleys are made out of 6061 billet aluminum, anodized black and comes standard with a... MSRP: Was: Now: $84.99 Add to Cart
Single -10an Low Profile Turbo Drain for GT and Xona Rotor Turbos Single 10an Low Profile Turbo Drain for GT and Xona Rotor Turbos SOLD AS A SingleThe DMS turbo drain fittings are perfect for low mount turbo kits or in any situation where clearance under the turbo is an issue. These come standard with a -10an... MSRP: Was: Now: $54.99 Add to Cart
4" Aluminum Donut 3/4:1 Radius 4" Aluminum Donut 3/4:1 Radius DescriptionThe 4" Aluminum Donut is perfect for custom exhaust systems or fabrication for intake manifolds needed in tight bends and corners. This donut can be cut at any degree of bend needed. The donut is... MSRP: Was: Now: $52.99 Add to Cart
DMS Auxiliary Fuel Pump Kit Optional Drill & Tap DMS Auxiliary Fuel Pump Kit Optional Drill & Tap Need to purchase the correct drill and tap kit for the DSX Auxiliary Fuel Pump Kit for your ZL1, CTS-V, or C6/Z06 Corvette? Look no further! This kit is the only recommended kit that includes both the... MSRP: Was: Now: $50.00 Add to Cart
DMS Defrost Vent Gauge Pod 52mm (2.065") DMS Defrost Vent Gauge Pod 52mm (2.065") This gauge pod is designed to replace the drivers side defrost vent on all 2009-2015 Cadillac CTS-V's allowing for the install of most 52mm or 2-1/16 Inch gauges. These pods are 3D printed in house and... MSRP: Was: Now: $49.99 Choose Options
DMS Defrost Vent Gauge Pod 60mm (2.36") DMS Defrost Vent Gauge Pod 60mm (2.36") This gauge pod is designed to replace the drivers side defrost vent on all 2009-2015 Cadillac CTS-V's allowing for the install of most 60mm or 2.36" Inch gauges. These pods are 3D printed in house and... MSRP: Was: Now: $49.99 Add to Cart
DMS Defrost Vent Gauge Pod 66mm (2.60") DMS Defrost Vent Gauge Pod 66mm (2.60") This gauge pod is designed to replace the drivers side defrost vent on all 2009-2015 Cadillac CTS-V's allowing for the install of most 66mm or 2.60" Inch gauges. These pods are 3D printed in house and... MSRP: Was: Now: $49.99 Add to Cart
3.5" Aluminum Donut 3/4:1 Radius 3.5" Aluminum Donut 3/4:1 Radius DescriptionThe 3.5" Aluminum Donut is perfect for custom exhaust systems or fabrication for intake manifolds needed in tight bends and corners. This donut can be cut at any degree of bend needed. The donut... MSRP: Was: Now: $47.99 Add to Cart
Exa Pump Bracket for 09-15 CTS-V Turbo Kit Exa Pump Bracket for 09-15 CTS-V Turbo Kit This bracket mounts the Turbowerx Exa Pump in the factory intercooler pump location. MSRP: Was: Now: $45.00 Add to Cart
DMS Billet Y-Fitting 1.00*3/4*3/4 DMS Billet Y-Fitting – 1.00" x 3/4" x 3/4" Say goodbye to cracked plastic Y-fittings. The Dedicated Motorsports Billet Y-Fitting offers a high-strength, long-lasting solution for your cooling or fluid routing setup. Precision-machined from 6061... MSRP: Was: Now: $44.99 Choose Options
DMS Billet Y-Fitting 3/4*3/4*3/4 DMS Billet Y-Fitting 3/4*3/4*3/4 Tired of plastic fittings breaking after a couple month of use? Dedicated Motorsports has a solution for you. These billet 3/4 inch Y-fittings are made from billet 6061 aluminum and anodized black for... MSRP: Was: Now: $44.99 Choose Options
3" Aluminum Donut 3/4:1 Radius 3" Aluminum Donut 3/4:1 Radius DescriptionThe 3" Aluminum Donut is perfect for custom exhaust systems or fabrication for intake manifolds needed in tight bends and corners. This donut can be cut at any degree of bend needed. The donut is... MSRP: Was: Now: $42.99 Add to Cart
3" DMS Billet Aluminum Weld on Bung and Anodized Fill Cap 3" DMS Billet Aluminum Weld on Bung and Anodized Fill Cap Description:1 Weld On Bung And Cap.Dimensions: Anodized Color Specifications: Black and Silver Bung Matierial: T-6061 Aluminum Cap Matierial: Aluminum Composite Bung Base Inner Diameter =A:... MSRP: Was: Now: $42.50 Add to Cart
2.5" Aluminum Donut 2.5" Aluminum Donut 3/4:1 Radius DescriptionThe 2.5" Aluminum Donut is perfect for custom exhaust systems or fabrication for intake manifolds needed in tight bends and corners. This donut can be cut at any degree of bend needed. The donut is often... MSRP: Was: Now: $39.99 Add to Cart
GM 1/8 NPT Map Sensor Adapter GM 1/8 NPT Map Sensor Adapter DMS 1/8" NPT MAP Sensor Adapter for GM LS Engines Introducing the DMS 1/8" NPT MAP Sensor Adapter, a versatile solution for expanding your GM LS engine's monitoring capabilities. This adapter allows you to easily tap into... MSRP: Was: Now: $38.99 Choose Options
6L80/6L90/8L90/10L90 Transmission Cooler Line Adapter 6L80/6L90/8L90/10L90 Transmission Cooler Line Adapter The DMS line adapter bolts onto any 6L80/6L90/8L90/10L90 and makes connecting aftermarket or custom transmission lines a breeze. Choose from either -6an or -8an depending on your application... MSRP: Was: Now: $36.99 Choose Options
DMS "DMS Tuning" Hoodie DMS "DMS Tuning" Hoodie These are a limited quanity run, get them while you can. Port & Company Core Fleece hoodies offer a great balance of comfort, durability and warmth. 7.8-ounce, 50/50 cotton/poly fleeceAir jet yarn... MSRP: Was: Now: $36.99 Choose Options
LT4 Valley Plug LT4 Supercharger Valley Plug – Reduce Oil Blow-By and Improve Intercooler Efficiency Keep your LT4 running cleaner and cooler with the Dedicated Motorsports LT4 Valley Plug. This precision CNC-machined billet plug is designed to block the oil... MSRP: Was: Now: $35.00 Add to Cart
.750 Inch Flush Mount 90 Degree Hose barb .750 Inch Flush Mount 90° Hose Barb CNC Machined – High Flow – Weld-On Aluminum Fitting This compact weld-on 90-degree hose barb is designed for applications where space is limited, and high-flow performance is critical. Ideal for... MSRP: Was: Now: $34.99 Add to Cart
Combo Corvette, CTS-V and Camaro LT4 SC Coolant Filler Adapter Tool Combo Corvette, CTS-V and Camaro LT4 SC Coolant Filler Adapter Tool Now made out of billet aluminum! Lets face it, the coolant filling system found on the LT4 supercharged C7 Corvette, Camaro ZL1 and CTS-V can be a real pain in the butt to fill... MSRP: Was: Now: $34.99 Add to Cart
2" Aluminum Donut Tight Radius 2" Aluminum Donut Tight Radius Description: The 2" Aluminum Donut is perfect for custom exhaust systems or fabrication for intake manifolds needed in tight bends and corners. This donut can be cut at any degree of bend needed. The donut is often... MSRP: Was: Now: $32.99 Add to Cart
2.5" DMS Billet Aluminum Weld on Bung and Anodized Fill Cap 2.5" DMS Billet Aluminum Weld on Bung and Anodized Fill Cap Description:1 Weld On Bung And Cap.Dimensions: Anodized Color Specifications: Black and Silver Bung Matierial: T-6061 Aluminum Cap Matierial: Aluminum Composite Bung Base Inner Diameter... MSRP: Was: Now: $32.50 Add to Cart
DMS "Stay Dedicated" Hoodie DMS "Stay Dedicated" Hoodie A proven winner improved with an updated fit, beefier rib knit details and a three-panel hood. It's also colorfast and resists shrinkage. 9-ounce, 65/35 ring spun combed cotton/poly fleece Twill-taped... MSRP: Was: Now: $29.99 Choose Options
LSA/LT4 Snout Block Off Plates LSA/LT4 Snout Block Off Plates Clean up the front of your LSA or LT4 supercharger with these snout block off plates from Dedicated Motorsports. Each piece is machined from 6061 aluminum and anodized black. Countersink hardware and o-rings are included... MSRP: Was: Now: $29.99 Add to Cart
3/4 Inch Billet Tee Fitting 3/4 Inch Billet Tee Fitting The DMS 3/4 inch tee fittings is machined out of a solid piece of 6061 aluminum and anodized to prevent corrosion. These are a great way to tee off coolant lines on cooling systems with multiple intercoolers and are a more... MSRP: Was: Now: $26.99 Choose Options
5/8 Inch Billet Tee Fitting 5/8 Inch Billet Tee Fitting The DMS 5/8 inch tee fittings is machined out of a solid piece of 6061 aluminum and anodized to prevent corrosion. These are a great way to tee off coolant lines on cooling systems with multiple intercoolers and are a more... MSRP: Was: Now: $26.99 Choose Options
DMS Flex Fit Hat DMS Flex Fit Hat (Black) 63/34/3 Polyester/Cotton/Spandex Twill Structured, mid-profile, six-panel, 3 1/2" crown Permacurv visor with silver undervisor Sewn eyelets S/M (6 3/4"-7 1/4"), L/XL (7 1/8"-7 5/8") MSRP: Was: Now: $25.00 Choose Options
-12an Quick Connect Adapter GM LSA, LS9, LT4, LT5 -12an Quick Connect Adapter GM LSA, LS9, LT4, LT5 This fitting is designed to adapt the GM 5/8 Quick connect found on most GM supercharger coolant lines to a more common -12an male fitting. Allowing the use of a larger diameter hose and endless... MSRP: Was: Now: $24.99 Choose Options
Gen V Cam Phaser Block Gen V Cam Phaser Limiter Block When installing a camshaft on any Gen V engine it is incredibly important to make sure you install a cam phaser limiter block. Engine damage will occure if this step is missed. MSRP: Was: Now: $24.99 Add to Cart
2" DMS Billet Aluminum Weld on Bung and Anodized Fill Cap 2" FS Billet Aluminum Weld on Bung and Anodized Fill Cap Description:1 Weld on Bung and Cap.Dimensions: Anodized Color Specifications: Black and Silver Bung Matierial: T-6061 Aluminum Cap Matierial: Aluminum Composite Bung Base Inner Diameter = A:... MSRP: Was: Now: $24.50 Add to Cart
DMS -16AN 120 Degree Pushlock Fitting DMS -16AN 120 Degree Pushlock Fitting These fittings are specifically designed for applications with a tight fit. We call these full flow because they are forged and have a constant inside diameter through the bend radius. Designed to be used with... MSRP: Was: Now: $24.00 Add to Cart
DMS -16AN 90 Degree Pushlock Fitting DMS -16AN 90 Degree Pushlock Fitting These fittings are specifically designed for applications with a tight fit. We call these full flow because they are forged and have a constant inside diameter through the bend radius. Designed to be used with... MSRP: Was: Now: $24.00 Add to Cart
DMS Richardson Hat - Heather Gray/ Black DMS Richardson 112 Hat Heather Gray/ Black Classic trucker cap style built with the Richardson quality and fit you’ve come to expect. SHAPE- MidPro FABRIC- Cotton-Poly/Nylon Mesh VISOR- Precurved SWEATBAND- Cotton FIT &... MSRP: Was: Now: $23.00 Add to Cart
-12an Low Profile 90-degree Swivel Hose End (Black) -12AN Low Profile 90° Swivel Hose End – Black (Full Flow) Maximize flow in tight spaces with our -12AN Low Profile 90-Degree Swivel Hose End, finished in sleek black. Engineered for high-performance plumbing applications where space is limited,... MSRP: Was: Now: $22.99 Add to Cart
DMS "CTS-V" T-Shirt DMS "CTS-V" T-Shirt Description:If you like the 2016+ CTS-V, this is the shirt for you. These are printed on Gildan Ultra Cotton shirts. 100% Cotton and preshrunk for a comfortable feel, normal fit and many years of service. Sizes: S, M, L, XL,... MSRP: Was: Now: $22.50 Choose Options
DMS "Louie" T-Shirt DMS "Louie" T-Shirt Description:If you've been to DMS, chances are you've been barked at by Matt's dog, Louie. We're making a short run of shirts featuring this sweet boy. Get them while you can! These are printed on Gildan Ultra Cotton shirts... MSRP: Was: Now: $22.50 Choose Options
DMS "OG" T-Shirt DMS "OG" T-Shirt Description:We lanched the first version of this shirt in 2015 as a reminder of what it takes to truly be Dedicated. These are printed on Gildan Ultra Cotton shirts. 100% Cotton and preshrunk for a comfortable feel, normal fit and many... MSRP: Was: Now: $22.50 Choose Options
