POWER COMMANDER 6 FOR 2020-2022 KAWASAKI KRX1000
Tried, true and tested the Power Commander continues to evolve with the Power Commander 6. Developed to simplify the user experience, PC6 makes choosing and tuning a map easier for the end user. All the same benefits you have relied on for over 20 years remain to keep you at the front of the pack.
The Power Commander 6 fuel injection tuning device allows you to optimize your fuel and timing curve (where applicable) giving you the confidence to roam freely. With fine tune adjustability and multiple inputs, the Power Commander 6 will keep your vehicle running at its full potential letting you concentrate on the journey ahead.
Featuring a plug-and-play setup, Power Commander 6 can be installed discreetly underneath your seat, cowl, dash or other location ensuring your ride looks as good as it runs. Removing the device reverts your vehicle completely back to stock. With the ability to store and switch between two maps on-the-fly (via the map switch accessory) and connect to various Power Commander accessories such as the Autotune or POD-300, the Power Commander 6 gives you features and functions that provide you with the ultimate ride.
The PTI version comes with a Bosch 3 bar MAP sensor pre-wired into the PC6 harness. Just install the sensor into the intake plenum and read PRESSURE within the PC6 software. The device comes with the PRESSURE table already configured for easy setup and useage.
All PC6 models have an end-user adjustment of +/-15 in the FUEL table and +/- 8 in the timing table (if applicable). This adjustment is on top of the values that are in the BASE map loaded to the device. This BASE map can be any of the available maps from the Dynojet website, or those you may have received from a third party. If you should need more adjustment, please contact your local Authorized Dynojet Dealer
