null
49 of 49 Items
  • FED M311 LS3/LSA BOOST Monster Cylinder Heads

    FED M311 LS3/LSA BOOST Monster Cylinder Heads

    FED M311 LS3/LSA BOOST Monster Cylinder Heads   Engineered and Machined by FED in the USA.Castings: 6 Bolt Head 0.750″ Deck Structure OEM/Factory Style Water Crossover Ports 7/16″ Stud Size For Main 10 Bolts 8mm Stud Size For Outer Tabs...

    $3,235.00
  • PRC LS3 Aftermarket 6-Bolt 260cc CNC Cylinder Heads PRC LS3 Aftermarket 6-Bolt 260cc CNC Cylinder Heads PRC LS3 Aftermarket 6-Bolt 260cc CNC Cylinder Heads

    PRC LS3 Aftermarket 6-Bolt 260cc CNC Cylinder Heads

    PRC LS3 Aftermarket 6-Bolt 260cc CNC Cylinder Heads   MADE IN THE USA CAST IN THE USA MACHINED IN THE USA   PRC's aftermarket casting LS3/L92/L99 cylinder heads come standard with the following options:   NEW PRC 13-Degree Valve Angle LS3...

    $2,699.99
  • Injector Dynamics ID1700X Fuel Injectors Injector Dynamics ID1700X Fuel Injectors

    Injector Dynamics ID1700X Fuel Injectors

    Injector Dynamics ID1700X   The ID1700x was designed to be an all fuel compatible injector, capable of very high flow rates. As such, it will most often be used to deliver E85 to boosted engines, or occasionally, gasoline in extreme high horsepower...

    $2,304.00
  • Injector Dynamics ID1300 Fuel Injectors Injector Dynamics ID1300 Fuel Injectors

    Injector Dynamics ID1300 Fuel Injectors

    Injector Dynamics ID1300 Fuel Injectors (Set of 8)   The ID1300 is an all new injector, designed in partnership with Bosch Motorsport. This collaboration has given us the ability to design a high flow injector with characteristics specific to the...

    $1,784.00
  • Complete E-85 Upgrade Package

    Complete E-85 Upgrade Package

    Complete E-85 Upgrade Package This is a complete package to get E85 up and going on your vehicle! Included in this package:   Vehicle specific flex fuel kit Vehicle specific aux fuel pump kit Injectors FIC 1000cc or 1300cc and Injector Dynamics...

    $1,724.99
  • FED LS3 821/823/LSA Stage 1 Porting Service FED LS3 821/823/LSA Stage 1 Porting Service FED LS3 821/823/LSA Stage 1 Porting Service FED LS3 821/823/LSA Stage 1 Porting Service FED LS3 821/823/LSA Stage 1 Porting Service

    FED LS3 821/823/LSA Stage 1 Porting Service

    FED LS3 821/823/LSA Stage 1 Porting Service We're extremely excited to work with Frankenstein Engine Dynamics on this program. Every set of heads starts off here at Dedicated Motorsports where we go through a complete tear down and inspection. If the...

    $1,589.48
  • DMS Sheetmetal LSA Lid DMS Sheetmetal LSA Lid DMS Sheetmetal LSA Lid DMS Sheetmetal LSA Lid DMS Sheetmetal LSA Lid

    DMS Sheetmetal LSA Lid

    DMS Sheetmetal LSA Lid Back In Stock!!   After the great ZL1 lid shortage of 2021 we noticed a void in the market. DMS decided to offer an affordable aftermarket lid that resembles the CTS-V lid with the coolant manifold in the rear and a smooth...

    $1,050.00
  • Injector Dynamics ID1050x Fuel Injectors

    Injector Dynamics ID1050x Fuel Injectors

    Injector Dynamics ID1050x The ID1050x is the evolution of the ID1000, and the latest addition to the X-Series. It is the most recent offering from the partnership of Injector Dynamics and Bosch Motorsport, and is the result of lessons learned during...

    $1,024.00
  • FIC 1000cc Fuel Injectors

    FIC 1000cc Fuel Injectors

    FIC 1000cc Fuel Injectors (8) 95 lb at 43.5 psi. These flow 114/hr in an LS rail running 58 psi fuel pressure. These are brand new Bosch EVI4 cores that have been modified and tested.   These units are high-impedance; making them compatible with...

    $729.99
  • Nick Williams 103MM DBW Billett Throttle Body Nick Williams 103MM DBW Billett Throttle Body Nick Williams 103MM DBW Billett Throttle Body

    Nick Williams 103MM DBW Billett Throttle Body

    Nick Williams 103MM DBW Billett Throttle Body   Nick Williams 103mm drive-by-wire CNC billet throttle body for LS applications. This redesigned version replaces the previous 102mm boosted & non-boosted versions.Nick Williams Performance Throttle...

    $725.00
  • Injector Dynamics ID F750 Fuel Filter Injector Dynamics ID F750 Fuel Filter Injector Dynamics ID F750 Fuel Filter Injector Dynamics ID F750 Fuel Filter Injector Dynamics ID F750 Fuel Filter

    Injector Dynamics ID F750 Fuel Filter

    Injector Dynamics ID F750 Fuel Filter   The Next Step in FiltrationThe ID F750 is the first performance filter designed to meet strict OE filter requirements, namely Bosch’s specification for electronic fuel injectors. It is the result of...

    $300.00
  • 50LB GM Flex Fuel Injectors

    50LB GM Flex Fuel Injectors

    50LB GM Flex Fuel Injectors   This set of 8 OEM GM flex fuel injectors are the perfect upgrade for naturally aspirated guys looking to run ethanol. These injectors are affordable and are oem quality meant for full time ethanol operation. Matching...

    $299.99
  • Brian Tooley .660" Lift Platinum Spring Kit

    Brian Tooley .660" Lift Platinum Spring Kit

    Brian Tooley .660" Lift Platinum Spring kit Sk001 With Titanium Retainers For LS1, LS2, LS3 and LSA EnginesTHESE ARE FOR STOCK ROCKERS .660" Lift Platinum Spring Kit SP001/SK001 springs are designed for use with stock rockers. Heavier roller rockers...

    $299.00
  • Fore Innovations LS3 Fuel Rails (LS2, L99, L76, LSXr) Fore Innovations LS3 Fuel Rails (LS2, L99, L76, LSXr) Fore Innovations LS3 Fuel Rails (LS2, L99, L76, LSXr)

    Fore Innovations LS3 Fuel Rails (LS2, L99, L76, LSXr)

    Fore Innovations LS3 Fuel Rails (LS2, L99, L76, LSXr)   DescriptionFore Innovations billet fuel rails for the LS2, LS3, L76, L99 motors, as well as Fast LSXr 102mm intakes for LS1, LS2, LS3, LS6, LS7, L99, L76. Machined from a solid block of 6061...

    $245.00
  • CHE Trunnion Bushing Kit

    CHE Trunnion Bushing Kit

    CHE Trunnion bushing kit   You don’t have to worry about nasty needle bearings escaping into your engine anymore! We have a high performance, high RPM solution! CHE Precision offers an LS/LT Trunnion Kit upgrade designed to improve the life...

    $235.00
  • DB-Blue Gauge / LC-2 Kit

    DB-Blue Gauge / LC-2 Kit

    DB-Blue Gauge / LC-2 Kit This kit comes complete with the patented award-winning LC-2 Wideband Controller, DB-Blue Gauge, Bosch LSU 4.9 Wideband O2 Sensor, 8ft Sensor Cable, Bung, Serial Cable, and Manual.

    $219.00
  • DMS -10an High Flow Billet Catch Can DMS -10an High Flow Billet Catch Can DMS -10an High Flow Billet Catch Can DMS -10an High Flow Billet Catch Can DMS -10an High Flow Billet Catch Can

    DMS -10an High Flow Billet Catch Can

    DMS -10an High Flow Billet Catch Can The DMS catch can goes well beyond the average tube with a bung in the side. Our can is engineered to use air velocity developed by crankcase pressure to aid in removing oil droplets via centrifugal force. As the...

    $179.99
  • Fuelab 6 Micron Microfiberglass 5" Fuel Filter (E85) Fuelab 6 Micron Microfiberglass 5" Fuel Filter (E85)

    Fuelab 6 Micron Microfiberglass 5" Fuel Filter (E85)

    Fuelab 6 Micron Microfiberglass 5" Fuel Filter (E85)   Choice of -6AN, -8AN, -10AN or -12AN inlet/outlet Fuelab filter with long (5 inch) 6 micron / Micro-Fiberglass Element - Our most advanced filter element provides extra particle protection and...

    $164.99
  • ARP Gen 4 Head Bolt Kit

    ARP Gen 4 Head Bolt Kit

    ARP Gen 4 Head Bolt Kit   Head Bolt Kit:Chevrolet Small Block, 2004 & later, with all same length bolts, hexKit #: 134-3610Kit Instructions

    $161.01
  • Fuelab 6 Micron Microfiberglass 3" Fuel Filter (E85) Fuelab 6 Micron Microfiberglass 3" Fuel Filter (E85)

    Fuelab 6 Micron Microfiberglass 3" Fuel Filter (E85)

    Fuelab 6 Micron Microfiberglass 3" Fuel Filter (E85)   Choice of -6AN, -8AN, -10AN or -12AN inlet/outlet Fuelab filter with long (3 inch) 6 micron / Micro-Fiberglass Element - Our most advanced filter element provides extra particle protection and...

    $146.99
  • Trick Flow Flywheel Holding Tools for GM LS

    Trick Flow Flywheel Holding Tools for GM LS

    Trick Flow Flywheel Holding Tools for GM LS   DescriptionTorque your harmonic balancer bolt on your LS engine with ease using Trick Flow® flywheel holding tools for GM LS. These specially made tools will hold your crankshaft in place while you...

    $99.97
  • ACDelco LS9 Plug Wire Set

    ACDelco LS9 Plug Wire Set

    ACDelco LS9 Plug wire set   This wire set was originally found on the C6 ZR1 LS9 engine but will fit a number of different engines and is the choice wire set for many DMS builds.   (Price is for a set of 8 wires, no metal shields included)

    $81.99
  • ACDelco LSA Plug wire set

    ACDelco LSA Plug wire set

    ACDelco LSA Plug wire set   This wire set was originally found on the LSA engine but will fit a number of different engines. (Price is for a set of 8 wires, no metal shields included)

    $69.99
  • LS Ignition Coil

    LS Ignition Coil

    LS Ignition Coil These coils are very common with all many LS2, LS3, LS7, LSA and LS9 engines. They bolt directly to the valve cover and are an upgrade from the older round coils. Price is per coil.

    $66.99
  • DMS Billet Center Cap for Weld Wheels DMS Billet Center Cap for Weld Wheels DMS Billet Center Cap for Weld Wheels DMS Billet Center Cap for Weld Wheels DMS Billet Center Cap for Weld Wheels

    DMS Billet Center Cap for Weld Wheels

    DMS Billet Center Cap for Weld Wheels  Clean up the look look of your weld wheels with this new center cap option from Dedicated Motorsports. These caps are cnc machined from 6061 aluminum and anodized to match the weld wheel color (non faded). We...

    $49.99
  • GM 1/8 NPT Map Sensor Adapter GM 1/8 NPT Map Sensor Adapter GM 1/8 NPT Map Sensor Adapter

    GM 1/8 NPT Map Sensor Adapter

    GM 1/8 NPT Map Sensor Adapter Dedicated Motorsports brings you another innovative product. This adapter effectively tee's into the manifold pressure source on any LS3, LSA or LS9 style map sensor. Allowing you to add a higher range map sensor for logging...

    $38.99
  • Coolant Crossover Adapter Ports Coolant Crossover Adapter Ports Coolant Crossover Adapter Ports

    Coolant Crossover Adapter Ports

    Coolant Crossover Adapter Ports Compatible with all LS series engines Includes: 2 coolant ports, 2 O-rings and 2 bolts 1/8" NPT threaded holes to crossover steam/coolant from cylinder heads Can be installed on the front or rear of the cylinder...

    $29.99
  • DMS Catch Can Billet Clamp DMS Catch Can Billet Clamp

    DMS Catch Can Billet Clamp

    DMS Catch Can Billet Clamp   This is a pre-sale. All beta testing is completed and production has begun. We will be tenativly shipping catch cans in 4-5 weeks. (10/30/2021)  

    $28.99
  • Coolant Steam Port Plugs/Block Off Coolant Steam Port Plugs/Block Off Coolant Steam Port Plugs/Block Off

    Coolant Steam Port Plugs/Block Off

    Coolant Steam Port Plugs/Block Off Includes 2 coolant ports, 2 orings, and 2 bolts Compatible with all GM LS series engines Can be installed on the front or rear of the cylinder heads Made in Wichita, Kansas from aerospace grade, USA produced, billet...

    $19.99
  • Full -10an Drill Valve Cover Fittings for LS Motors Full -10an Drill Valve Cover Fittings for LS Motors

    Full -10an Drill Valve Cover Fittings for LS Motors

    Full -10an Drill and Press Valve Cover Fittings for LS Motors   *********Price is per fitting, most cars will need two.*********** Dedicated Motorsports brings you a simple solution for adding -10an fittings to GM valve covers. These fittings are...

    $19.99
  • Press in -10an Valve Cover Fittings for LS Motors Press in -10an Valve Cover Fittings for LS Motors

    Press in -10an Valve Cover Fittings for LS Motors

    Press in -10an Valve Cover Fittings for LS Motors   *********Price is per fitting, most cars will need two.*********** Dedicated Motorsports brings you a simple solution for adding -10an fittings to GM valve covers. These fittings are designed to...

    $19.99
  • EFI 3/8 to 3/8 Quick Disconnect Coupler EFI 3/8 to 3/8 Quick Disconnect Coupler

    EFI 3/8 to 3/8 Quick Disconnect Coupler

    EFI 3/8 to 3/8 Quick Disconnect Coupler DMS brings you a fitting commonly needed, yet hard to find. This fitting is designed to connect a pair of 3/8" EFI hard lines together. Much like you would find on the end of a GM flex fuel sensor or Gm fuel rail...

    $14.99
49 of 49 Items